Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 0709.4088

In Situ Experiment and Modelling of RC-Structure Using Ambient Vibration and Timoshenko Beam

Clotaire Michel·Stéphane Hans·Philippe Guéguen·Claude Boutin
View original source ↗Read source document ↗Export metadata ↓

Abstract

Recently, several experiments were reported using ambient vibration surveys in buildings to estimate the modal parameters of buildings. Their modal properties are full of relevant information concerning its dynamic behaviour in its elastic domain. The main scope of this paper is to determine relevant, though simple, beam modelling whose validity could be easily checked with experimental data. In this study, we recorded ambient vibrations in 3 buildings in Grenoble selected because of their vertical structural homogeneity. First, a set of recordings was done using a 18 channels digital acquisition system (CityShark) connected to six 3C Lennartz 5s sensors. We used the Frequency Domain Decomposition (FDD) technique to extract the modal parameters of these buildings. Second, it is shown in the following that the experimental quasi-elastic behaviour of such structure can be reduced to the behaviour of a vertical continuous Timoshenko beam. A parametric study of this beam shows that a bijective relation exists between the beam parameters and its eigenfrequencies distribution. Consequently, the Timoshenko beam parameters can be estimated from the experimental sequence of eigenfrequencies. Having the beam parameters calibrated by the in situ data, the reliability of the modelling is checked by complementary comparisons. For this purpose, the mode shapes and eigenfrequencies of higher modes are calculated and compared to the experimental data. A good agreement is also obtained. In addition, the beam model integrates in a very synthetic way the essential parameters of the dynamic behaviour.

Explore related subjects

physics.geo-phphysics.class-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Clotaire Michel, Stéphane Hans, Philippe Guéguen, Claude Boutin. 2007-09-26. In Situ Experiment and Modelling of RC-Structure Using Ambient Vibration and Timoshenko Beam. https://arxiv.org/abs/0709.4088

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

A Poromechanics-Based Framework for Fully Coupled Reactive Transport and Geomechanics in Porous Rocks

Mineral precipitation and dissolution in rocks alter pore structure, stress, and hydraulic properties, producing tightly coupled chemo-hydro-mechanical processes that are central to subsurface systems. Yet, existing continuum-scale simulators lack a generalizable, mathematically tractable, and physically grounded chemo-mechanics formulation for modeling these coupled processes. To address this gap, this work presents a poromechanics-based framework for chemo-mechanics coupling and integrates it into coupled reactive transport and geomechanics simulations. Building upon classical poromechanics theory, the framework provides distinct descriptions for the stress states of the host rock and pore minerals, in addition to pore fluid pressure, enabling a rigorous and flexible treatment of their individual behavior and mechanical interactions during precipitation and dissolution. As demonstrated by numerical examples, the poromechanics-based method captures the expected mechanical response by translating pore-scale mineral growth into mineralization pressure. By accounting for mineral compressibility, the method also supports more physically realistic representations of deformation and induced stress. Numerical comparisons further highlight the unique capability of the poromechanics-based approach to model effective stress evolution and fracture development without explicitly representing pore geometry or other microstructural features. Overall, this framework offers a versatile, physics-based predictive approach to modeling coupled chemo-mechanical processes in reactive porous rocks and supports future reservoir-scale analyses of engineered subsurface systems.

physics.geo-ph↗
arXiv2026

Direction-Aware Masked Pretraining on 3D Seismic Data with Transfer to Cross-Area Acoustic Impedance Inversion

Seismic feature extraction and acoustic impedance inversion are important for subsurface characterisation, but sparse well-log data limit the generalisation of data-driven inversion models across different areas. Self-supervised masked pretraining offers a way to exploit large volumes of unlabelled seismic data; however, conventional approaches often overlook the directional characteristics of 3D seismic data. We propose a direction-aware masked autoencoder (DA-MAE) that distinguishes lateral reflector structure from vertical waveform characteristics in 3D post-stack data. The framework incorporates this distinction into token representation, masking geometry, and reconstruction constraints on reflector continuity and waveform fidelity. We evaluate DA-MAE through masked reconstruction on an independent field survey and cross-area acoustic impedance inversion using two additional field areas. Reconstruction experiments show that performance is more sensitive to lateral token resolution than to moderate changes in vertical patch length, and that increasing encoder capacity does not fully compensate for coarse tokenization. Moreover, the preferred token scales and masking strategies vary between reconstruction and inversion, suggesting that reconstruction fidelity alone is not a reliable indicator of transferability. In cross-area inversion, the pretrained representations remain effective in the target area and improve impedance prediction, demonstrating their transferability across different seismic surveys. These results provide practical guidance for seismic-specific masked pretraining and its application to acoustic impedance inversion.

physics.geo-ph↗
arXiv2026

Explaining Ground-Motion Residuals at Two Strong-Motion Stations in Southeastern New York: Sediment Resonance and Topographic Amplification

Sites hosting strong-motion stations in the Central and Eastern United States are commonly characterized using proxy-based parameters, limiting the ability to identify the physical causes of large ground-motion residuals. This study investigates the amplification mechanisms at two New York strong-motion stations that recorded some of the largest positive 1-Hz pseudospectral-acceleration residuals during the 2024 Mw 4.8 Tewksbury, New Jersey, earthquake. Station N62A is located at Caumsett State Historic Park in the Atlantic Coastal Plain, whereas station PAL is located at the Lamont-Doherty Earth Observatory atop the Palisades cliffs. Detailed geophysical site characterization at both sites combined active-source and ambient-noise surface-wave testing with HVSR measurements. At Lamont-Doherty, additional ambient-noise arrays were deployed across the Palisades ridge to evaluate topographic amplification. At Caumsett, surface-wave testing resolved a thick sedimentary column overlying a major impedance contrast, with a spatially representative fundamental site frequency of 0.93 Hz. Amplification in the same frequency range was also independently evident in observed amplifications computed from site-to-site (S2S) residuals. The fundamental-resonance band also encompasses the 1-Hz frequency at which the large Tewksbury residual was observed, supporting deep sediment resonance as the dominant mechanism. At Lamont-Doherty, surface-wave testing indicated hard-rock conditions with a thin, laterally variable sediment cover. The ambient-noise arrays showed repeatable, directional amplification near 2 Hz at PAL, and the earthquake-based S2S amplifications show a peak between approximately 0.6 and 2 Hz, a pattern reproduced by neither the transfer functions nor the ergodic linear amplification models. These observations support topographic amplification as the primary mechanism at PAL.

physics.geo-ph↗