Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1001.0794

Consequences of spectrograph illumination for the accuracy of radial-velocimetry

I. Boisse·F. Bouchy·B. Chazelas·S. Perruchot·F. Pepe·C. Lovis·G. Hebrard
View original source ↗Read source document ↗Export metadata ↓

Abstract

For fiber-fed spectrographs with a stable external wavelength source, scrambling properties of optical fibers and, homogeneity and stability of the instrument illumination are important for the accuracy of radial-velocimetry. Optical cylindric fibers are known to have good azimuthal scrambling. In contrast, the radial one is not perfect. In order to improve the scrambling ability of the fiber and to stabilize the illumination, optical double scrambler are usually coupled to the fibers. Despite that, our experience on SOPHIE and HARPS has lead to identified remaining radial-velocity limitations due to the non-uniform illumination of the spectrograph. We conducted tests on SOPHIE with telescope vignetting, seeing variation and centering errors on the fiber entrance. We simulated the light path through the instrument in order to explain the radial velocity variation obtained with our tests. We then identified the illumination stability and uniformity has a critical point for the extremely high-precision radial velocity instruments (ESPRESSO@VLT, CODEX@E-ELT). Tests on square and octagonal section fibers are now under development and SOPHIE will be used as a bench test to validate these new feed optics.

Explore related subjects

astro-ph.IMastro-ph.EPastro-ph.SR

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

I. Boisse, F. Bouchy, B. Chazelas, S. Perruchot, F. Pepe, C. Lovis, G. Hebrard. 2010-01-06. Consequences of spectrograph illumination for the accuracy of radial-velocimetry. https://doi.org/10.1051/epjconf%2F20111602003

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Investigation of magnetic-field effects on photomultiplier tubes for the first Large-Sized Telescope of the Cherenkov Telescope Array Observatory

Photomultiplier tubes (PMTs) are widely used in imaging atmospheric Cherenkov telescopes. Their response can depend on the telescope pointing direction through changes in their orientation relative to the geomagnetic field. Such a dependence was indicated during the calibration campaign of the CTAO LST-1. In this work, the LST-1 calibration data are analyzed to quantify the gain dependence in terms of the geomagnetic field, and dedicated laboratory measurements are performed to test the hypothesis that the observed dependence originates from magnetic-field effects. Both the on-site and laboratory measurements show a consistent dependence of the PMT gain on the magnetic field, while the laboratory measurements further separate the effects on the gain and the excess noise factor. These results provide a clearer understanding of the gain variation observed in LST-1 in terms of magnetic-field effects.

astro-ph.IM↗
arXiv2026

Semi-automated single-mode fiber coupling for AO-fed spectrographs

Conventional astronomical spectrographs are seeing-limited and commonly use multimode fibers to inject starlight into downstream optics. Forthcoming Doppler radial-velocity (RV) instruments are expected to make increasing use of adaptive optics and smaller single-mode fibers (SMF), enabling higher spectral resolution and improved stabilization of the spectrograph point-spread function. However, coupling starlight into SMFs with characteristic diameters of only 5-10 microns at near-infrared wavelengths is technically demanding, requiring alignment procedures that are both efficient and stable throughout the duration of an observation. In this paper, we describe a semi-automated SMF coupling control program being developed for diffraction-limited RV spectrographs. Representative simulations demonstrate that the controller reduces the star-fiber separation from approximately 3.9 mode field diameters (MFD) to 0.11 MFD while increasing a normalized coupling metric from zero to values near 0.6-0.8 after acquisition. Application to closely-separated binary stars is also studied.

astro-ph.IM↗
arXiv2026

STRADAViT: Self-Supervised Domain Adaptation of Vision Transformer Backbones for Radio Astronomy

Next-generation radio astronomy surveys are delivering millions of resolved sources, yet scalable morphology analysis remains difficult across heterogeneous telescopes and imaging pipelines. We present STRADAViT, a self-supervised continued-pretraining framework for learning transferable radio-astronomy encoders from Vision Transformer (ViT) backbones. It combines mixed-survey data curation, radio astronomy-aware training-view generation, and a ViT-MAE-initialized encoder family with optional register tokens. It supports reconstruction-only, contrastive-only, and two-stage branches. Our pretraining dataset comprises 512x512 radio astronomy cutouts drawn from four complementary sources (MeerKAT, ASKAP, LOFAR/LoTSS, and SKA SDC1 simulated data). We evaluate transfer with linear probing (LP) and fine-tuning (FT) on three morphology benchmarks spanning binary and multi-class settings (MiraBest, LoTSS DR2, and Radio Galaxy Zoo). An exploratory three-fold ablation grid guides selection of a register-based two-stage checkpoint using a fixed cross-dataset criterion. Across subsequent 15-seed paired downstream evaluations on fixed partitions, this checkpoint improves linear-probe Macro-F1 over its ViT-MAE initialization on all three benchmarks and improves fine-tuning on MiraBest and RGZ DR1, while LoTSS DR2 fine-tuning declines; all six differences remain statistically supported after Holm correction. A parallel DINOv2 experiment yields mixed adaptation effects: the procedure transfers, but the benefit is not uniform. STRADAViT thus improves frozen ViT representations while retaining clear dataset-dependent limitations and remaining below task-specialized methods on standard MiraBest classification.

astro-ph.IM↗