Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1201.2107

Design and ASIC implementation of DUC/DDC for communication systems

Naagesh S. Bhat
View original source ↗Read source document ↗Export metadata ↓

Abstract

Communication systems use the concept of transmitting information using the electrical distribution network as a communication channel. To enable the transmission data signal modulated on a carrier signal is superimposed on the electrical wires. Typical power lines are designed to handle 50/60 Hz of AC power signal; however they can carry the signals up to 500 KHz frequency. This work aims to aid transmission/reception of an audio signal in the spectrum from 300 Hz to 4000 Hz using PLCC on a tunable carrier frequency in the spectrum from 200 KHz to 500 KHz. For digital amplitude modulation the sampling rate of the carrier and the audio signal has to be matched. Tunable carrier generation can be achieved with Direct Digital Synthesizers at a desired sampling rate. DSP Sample rate conversion techniques are very useful to make the sampling circuits to work on their own sampling rates which are fine for the data/modulated-carrier signal's bandwidth. This also simplifies the complexity of the sampling circuits. Digital Up Conversion (DUC) and Digital Down Conversion (DDC) are DSP sample rate conversion techniques which refer to increasing and decreasing the sampling rate of a signal respectively.

Explore related subjects

cs.AR

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Naagesh S. Bhat. 2012-01-10. Design and ASIC implementation of DUC/DDC for communication systems. https://doi.org/10.5121/vlsic.2011.2410

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Bi-SamplerZ: A Rejection-Aware Cooperative Gaussian Sampling Framework for Falcon Signature Hardware

We present Bi-SamplerZ, a rejection-aware cooperative sampling framework that converts this idle capacity into useful computation. After an asymmetric accept/reject outcome, Bi- SamplerZ latches the completed logical result and dynamically reassigns the released physical datapath to the unfinished target. The two paths then evaluate fresh independent candidates for the same remaining distribution. We show that this post-rejection cooperation increases the assisted-round completion probability without modifying the underlying candidate distribution or Bernoulli acceptance rule, and we state the randomness-allocation conditions required to preserve the joint output distribution of the original pair of logical sampler calls

cs.AR↗
arXiv2026

A Multi-Engine Dataflow for MoE Decoding on Scratchpad-Based Tensor Accelerators

Mixture-of-Experts (MoE) decoding on scratchpad-based tensor accelerators (STA) is dominated by moving expert weights while the compute engines sit idle. This traffic is hard to hide, because the experts are known only after routing, and hard to shrink without losing quality or adding critical-path work. We present CARDAN, which represents each expert-weight matrix as a vector-quantized component plus a shared-basis low-rank component and co-designs this representation with a multi-engine decoding dataflow. The representation separates expert-common from expert-private work, so the dataflow overlaps DMA with computation on several engines. Across five MoE families on AWS Trainium3, CARDAN matches or improves BF16-teacher perplexity across all five models and speeds up batch-one decoding by 1.15-1.31x over AWS dense MoE megakernels, rising to 1.7x at batch size 16.

cs.AR↗
arXiv2026

Dissecting How Die Scaling Breaks GPU Fine-grained Scheduling

Modern GPUs are no longer physically symmetric. Die scaling leads to both manufacturing-driven floorsweeping and cache and memory partitioning. The former creates chip-specific compute topologies, while the latter causes non-uniform memory access. These asymmetries are substantial. Topology-oblivious compute unit allocation can lead to up to 1.33x performance variation, while remote accesses increase HBM latency by up to 67% and nearly double L2 latency. However, these asymmetries are hidden behind the GPU's logical resource abstractions and can vary across chips. We develop lightweight characterization methods to uncover per-chip compute topology and memory affinity. We then use the discovered information to make existing fine-grained scheduling asymmetry-aware, considering not only how many resources are allocated but also which physical resources are assigned. Across full-GPU kernel execution, intra-application multiplexing, and inter-application co-location, asymmetry-aware scheduling improves mainstream kernels by up to 1.22x, multiplexed LLM inference by up to 14.3%, and avoids up to 1.33x performance variation.

cs.AR↗