Vibroacoustics of the piano soundboard: Reduced models, mobility synthesis, and acoustical radiation regime

Xavier Boutillon; Kerem Ege

doi:10.1016/j.jsv.2013.03.015

Home/Archive/arXiv

arXiv · 1305.3057

Vibroacoustics of the piano soundboard: Reduced models, mobility synthesis, and acoustical radiation regime

Xavier Boutillon·Kerem Ege

View original source ↗Read source document ↗Export metadata ↓

Abstract

In string musical instruments, the sound is radiated by the soundboard, subject to the strings excitation. This vibration of this rather complex structure is described here with models which need only a small number of parameters. Predictions of the models are compared with results of experiments that have been presented in Ege et al. [Vibroacoustics of the piano soundboard: (Non)linearity and modal properties in the low- and mid- frequency ranges, Journal of Sound and Vibration 332 (5) (2013) 1288-1305]. The apparent modal density of the soundboard of an upright piano in playing condition, as seen from various points of the structure, exhibits two well-separated regimes, below and above a frequency flim that is determined by the wood characteristics and by the distance between ribs. Above flim, most modes appear to be localised, presumably due to the irregularity of the spacing and height of the ribs. The low-frequency regime is predicted by a model which consists of coupled sub-structures: the two ribbed areas split by the main bridge and, in most cases, one or two so-called cut-off corners. In order to assess the dynamical properties of each of the subplates (considered here as homogeneous plates), we propose a derivation of the (low-frequency) modal density of an orthotropic homogeneous plate which accounts for the boundary conditions on an arbitrary geometry. Above flim, the soundboard, as seen from a given excitation point, is modelled as a set of three structural wave-guides, namely the three inter-rib spacings surrounding the excitation point. Based on these low- and high-frequency models, computations of the point-mobility and of the apparent modal densities seen at several excitation points match published measurements. The dispersion curve of the wave-guide model displays an acoustical radiation scheme which differs significantly from that of a thin homogeneous plate. It appears that piano dimensioning is such that the subsonic regime of acoustical radiation extends over a much wider frequency range than it would be for a homogeneous plate with the same low-frequency vibration. One problem in piano manufacturing is examined in relationship with the possible radiation schemes induced by the models.

Explore related subjects

physics.class-ph

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Xavier Boutillon, Kerem Ege. 2013-05-14. Vibroacoustics of the piano soundboard: Reduced models, mobility synthesis, and acoustical radiation regime. https://doi.org/10.1016/j.jsv.2013.03.015

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Unifying pendulum-like dynamical regimes via complex time

We present an alternative derivation of exact solutions for pendulum-like systems across all dynamical regimes using a standard technique in undergraduate mathematical physics course: the Cauchy residue theorem, entirely independent from the traditional Jacobi elliptic framework. The solutions are exact in both the time and frequency domains, providing continuous trajectories and precise frequency decompositions. Pendulum-like dynamics is a foundational model across many areas of physics, underlying systems ranging from classical nonlinear oscillators to superconducting qubits and cold-atom tunneling platforms. While its time-domain solutions are well-known in terms of Jacobi elliptic functions, its obscured frequency-domain solutions have led a large body of theoretical and experimental work to develop and apply approximate methods when studying its spectral behavior. We discover that all regimes arise from a single spectral kernel, with parity selection distinguishing the periodic motions and the separatrix representing their discrete-to-continuum limit. Regime changes thus correspond to symmetry-driven reorganizations in frequency space rather than changes in the underlying spectral structure, with the stopping trajectory representing the continuum limit. By completely bypassing the traditional Jacobi elliptic functions, and relying on the symmetrical structure of the complex time plane, the derivation shows that the symmetrical spectral structure is not merely algebraic artifacts of elliptic integrals, but fundamentally connected to the dynamical symmetries of the system. The derivation presented here not only serves as a powerful pedagogical exercise for this long-standing physics problem, but also reveals a highly symmetrical spectral organization in nonlinear dynamics.

physics.class-ph↗

arXiv2026

Spectral taxonomy for quartic systems: fundamental clock, parity, and continuum

A symmetric quartic potential is a physics model with expansive applications, ranging from broadband energy harvesters, quantum tunneling in molecules and the early universe, to torque-free spacecraft rotation. Its rich dynamics have been traditionally classified into regimes and expressed as disjointed time-domain solutions. Here we build a taxonomy for this broad class of motions and discover that their regimes exhibit a symmetrical spectral structure: they share a fundamental clock, obey parity selection, and dissolve into the separatrix through a discrete-to-continuum transition. Applied to the famous Dzhanibekov effect where a rotating body periodically undergoes rapid 180-degree flips in its attitude, the taxonomy reveals its spectral anatomy. The three principal-axis rotations share a common clock while occupying distinct parity channels, with stable-axis branches exchanging DC bias across the separatrix. We discuss a case study where the three spectral pillars: clock, parity, and continuum, survive the Wick rotation from real-time into imaginary-time kinematics.

physics.class-ph↗

arXiv2026

Bypass transition under wall cooling over a flat plate with an elliptical leading edge

This study uses wall-resolved large-eddy simulations to investigate bypass transition in a flat-plate boundary layer subjected to free-stream turbulence. Two thermal configurations are considered: an adiabatic wall and a uniformly cooled wall. The plate geometry includes an elliptic leading edge and is designed for direct experimental reproduction, providing a framework for future numerical-experimental comparisons. The resolved leading edge allows direct examination of the early stages of bypass transition. Both simulations recover the classical sequence of receptivity, vortex tilting, lift-up, streak amplification, secondary instability and turbulent-spot growth. The wall-normal transport term is identified as a precursor of streak formation, while shear sheltering is quantified and linked to the frequency-dependent penetration of free-stream disturbances into the boundary layer. Wall cooling does not modify the bypass-transition mechanisms nor the onset location of transition. Instead, it generates thermal streaks alongside the velocity streaks and shifts the latter slightly closer to the wall, consistent with optimal-perturbation predictions. The velocity streaks retain similar amplitudes, growth rates and spanwise spacings in both thermal conditions. A conditional analysis reveals a pronounced asymmetry between high- and low-velocity streaks. Although breakdown is systematically observed within low-velocity streaks, the strongest pre-transitional evolution occurs within the high-velocity streak population, which undergoes significant amplification and a progressive displacement towards the wall before the onset of intermittency. These observations suggest that high-velocity streaks may actively contribute to the reorganisation of the streak field leading to secondary instability and breakdown.

physics.class-ph↗