GPU Enhancement of the Trigger to Extend Physics Reach at the LHC

V. Halyo; A. Hunt; P. Jindal; P. LeGresley; P. Lujan

doi:10.1088/1748-0221/8/10/p10005

Home/Archive/arXiv

arXiv · 1305.4855

GPU Enhancement of the Trigger to Extend Physics Reach at the LHC

V. Halyo·A. Hunt·P. Jindal·P. LeGresley·P. Lujan

View original source ↗Read source document ↗Export metadata ↓

Abstract

Significant new challenges are continuously confronting the High Energy Physics (HEP) experiments, in particular the two detectors at the Large Hadron Collider (LHC) at CERN, where nominal conditions deliver proton-proton collisions to the detectors at a rate of 40 MHz. This rate must be significantly reduced to comply with both the performance limitations of the mass storage hardware and the capabilities of the computing resources to process the collected data in a timely fashion for physics analysis. At the same time, the physics signals of interest must be retained with high efficiency. The quest for rare new physics phenomena at the LHC leads us to evaluate a Graphics Processing Unit (GPU) enhancement of the existing High-Level Trigger (HLT), made possible by the current flexibility of the trigger system, which not only provides faster and more efficient event selection, but also includes the possibility of new complex triggers that were not previously feasible. A new tracking algorithm is evaluated on a NVIDIA Tesla K20c GPU, allowing for the first time the reconstruction of long-lived particles at the tracker system in the trigger. Preliminary time performance and efficiency will be presented.

Explore related subjects

physics.ins-det hep-ex

Keep this discovery

BibTeX RIS

V. Halyo, A. Hunt, P. Jindal, P. LeGresley, P. Lujan. 2013-08-14. GPU Enhancement of the Trigger to Extend Physics Reach at the LHC. https://doi.org/10.1088/1748-0221%2F8%2F10%2Fp10005

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det↗

arXiv2026

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det↗

arXiv2026

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det↗