Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1309.2741

Initial versus tangent stiffness-based Rayleigh damping in inelastic time history seismic analyses

Pierre Jehel·Pierre Léger·Adnan Ibrahimbegovic
View original source ↗Read source document ↗Export metadata ↓

Abstract

In the inelastic time history analyses of structures in seismic motion, part of the seismic energy that is imparted to the structure is absorbed by the inelastic structural model, and Rayleigh damping is commonly used in practice as an additional energy dissipation source. It has been acknowledged that Rayleigh damping models lack physical consistency and that, in turn, it must be carefully used to avoid encountering unintended consequences as the appearance of artificial damping. There are concerns raised by the mass proportional part of Rayleigh damping, but they are not considered in this paper. As far as the stiffness proportional part of Rayleigh damping is concerned, either the initial structural stiffness or the updated tangent stiffness can be used. The objective of this paper is to provide a comprehensive comparison of these two types of Rayleigh damping models so that a practitioner (i) can objectively choose the type of Rayleigh damping model that best fits her/his needs and (ii) is provided with useful analytical tools to design Rayleigh damping model with good control on the damping ratios throughout inelastic analysis. To that end, a review of the literature dedicated to Rayleigh damping within these last two decades is first presented; then, practical tools to control the modal damping ratios throughout the time history analysis are developed; a simple example is finally used to illustrate the differences resulting from the use of either initial or tangent stiffness-based Rayleigh damping model.

Explore related subjects

physics.class-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Pierre Jehel, Pierre Léger, Adnan Ibrahimbegovic. 2013-09-11. Initial versus tangent stiffness-based Rayleigh damping in inelastic time history seismic analyses. https://doi.org/10.1002/eqe.2357

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Repeated Binary Direct Collinear Impacts Under Incremental Contact Laws With Permanent Indentation: A Hybrid Systems Formulation

Incremental contact laws specify the normal contact force through a differential equation carrying an internal state, driven by the indentation and its rate. In some, the force is extinguished at a nonzero indentation, whether by plastic deformation or by an elastic aftereffect, so that a residual deformation remains at the separation. Such laws sit uneasily within rigid body dynamics, which admits no deformation. The tension is tolerable when the indentation is small relative to the bodies, so that it may be carried constitutively rather than geometrically. Even then, the contact law alone does not determine the interaction of the bodies. Because force and indentation no longer vanish together, conditions for the commencement and termination of contact must be supplied separately. So must the fate of the deformation and internal state at separation, neither of which the equations of motion contain. This article formulates the repeated direct collinear impact of two convex bodies under external forces as a hybrid dynamical system. The contact interface is modeled as a massless element carrying the contact law and its state, coupled to the bodies through relative velocity and an interaction force dictated by the contact state. Consequently, all switching and resets are confined to the interface, leaving the geometry and the equations of motion of the bodies unaltered. The principal analytical properties of the resulting formulations are established, among them passivity and completeness; the branching of solutions at the onset and termination of contact is also examined. The framework is demonstrated through numerical simulations.

physics.class-ph↗
arXiv2026

Characterizing the Carnot cycle at absolute zero: a reply to "Comment on `Proof of the Nernst theorem' "

This reply addresses a recent comment concerning the proof of the Nernst theorem. I clarify how a Carnot engine can consistently operate at $T=0$ through a continuous deformation of a cycle operating at $T>0$. By examining the limit where heat exchange with the cold reservoir vanishes, I show that the Nernst theorem ensures that the concept of temperature remains physically consistent at the absolute zero limit.

physics.class-ph↗
arXiv2026

Unifying pendulum-like dynamical regimes via complex time

We present an alternative derivation of exact solutions for pendulum-like systems across all dynamical regimes using a standard technique in undergraduate mathematical physics course: the Cauchy residue theorem, entirely independent from the traditional Jacobi elliptic framework. The solutions are exact in both the time and frequency domains, providing continuous trajectories and precise frequency decompositions. Pendulum-like dynamics is a foundational model across many areas of physics, underlying systems ranging from classical nonlinear oscillators to superconducting qubits and cold-atom tunneling platforms. While its time-domain solutions are well-known in terms of Jacobi elliptic functions, its obscured frequency-domain solutions have led a large body of theoretical and experimental work to develop and apply approximate methods when studying its spectral behavior. We discover that all regimes arise from a single spectral kernel, with parity selection distinguishing the periodic motions and the separatrix representing their discrete-to-continuum limit. Regime changes thus correspond to symmetry-driven reorganizations in frequency space rather than changes in the underlying spectral structure, with the stopping trajectory representing the continuum limit. By completely bypassing the traditional Jacobi elliptic functions, and relying on the symmetrical structure of the complex time plane, the derivation shows that the symmetrical spectral structure is not merely algebraic artifacts of elliptic integrals, but fundamentally connected to the dynamical symmetries of the system. The derivation presented here not only serves as a powerful pedagogical exercise for this long-standing physics problem, but also reveals a highly symmetrical spectral organization in nonlinear dynamics.

physics.class-ph↗