Search arXivSearch

arXiv · 1401.6375

Design of an Encryption-Decryption Module Oriented for Internet Information Security SOC Design

Abstract

In order to protect the security of network data, a high speed chip module for encrypting and decrypting of network data packet is designed. The chip module is oriented for internet information security SOC (System on Chip) design. During the design process, AES (Advanced Encryption Standard) and 3DES (Data Encryption Standard) encryption algorithm are adopted to protect the security of network data. The following points are focused: (1) The SOC (System on Chip) design methodology based on IP (Intellectual Property) core is used. AES (Advanced Encryption Standard) and 3DES (Data Encryption Standard) IP (Intellectual Property) cores are embedded in the chip module, peripheral control sub-modules are designed to control the encryption-decryption module, which is capable of shortening the design period of the chip module. (2) The implementation of encryption-decryption with hardware was presented, which improves the safety of data through the encryption-decryption chip and reduce the load of CPU. (3) In our hardware solution, two AES (Advanced Encryption Standard) cores are used to work in parallel, which improves the speed of the encryption module. Moreover, the key length of AES (Advanced Encryption Standard) encryption algorithm is designed with three optional configurations at 128 bits, 256 bits and 192 bits respectively and six optional encryption algorithm modes: CBC (Cipher Block Chaining) mode, ECB (Electronic Code Book) mode, GCM (Galois/Counter Mode) mode, XTS(cipherteXT Stealing) mode, CTR (CounTeR) mode and 3DES respectively, which adds the flexibility to its applications.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Yixin Liu, Haipeng Zhang, Tao Feng. 2014-01-24. Design of an Encryption-Decryption Module Oriented for Internet Information Security SOC Design. https://doi.org/10.7321/jscse.v2.n7.3

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Bi-SamplerZ: A Rejection-Aware Cooperative Gaussian Sampling Framework for Falcon Signature Hardware

We present Bi-SamplerZ, a rejection-aware cooperative sampling framework that converts this idle capacity into useful computation. After an asymmetric accept/reject outcome, Bi- SamplerZ latches the completed logical result and dynamically reassigns the released physical datapath to the unfinished target. The two paths then evaluate fresh independent candidates for the same remaining distribution. We show that this post-rejection cooperation increases the assisted-round completion probability without modifying the underlying candidate distribution or Bernoulli acceptance rule, and we state the randomness-allocation conditions required to preserve the joint output distribution of the original pair of logical sampler calls

cs.AR

A Multi-Engine Dataflow for MoE Decoding on Scratchpad-Based Tensor Accelerators

Mixture-of-Experts (MoE) decoding on scratchpad-based tensor accelerators (STA) is dominated by moving expert weights while the compute engines sit idle. This traffic is hard to hide, because the experts are known only after routing, and hard to shrink without losing quality or adding critical-path work. We present CARDAN, which represents each expert-weight matrix as a vector-quantized component plus a shared-basis low-rank component and co-designs this representation with a multi-engine decoding dataflow. The representation separates expert-common from expert-private work, so the dataflow overlaps DMA with computation on several engines. Across five MoE families on AWS Trainium3, CARDAN matches or improves BF16-teacher perplexity across all five models and speeds up batch-one decoding by 1.15-1.31x over AWS dense MoE megakernels, rising to 1.7x at batch size 16.

cs.AR

Dissecting How Die Scaling Breaks GPU Fine-grained Scheduling

Modern GPUs are no longer physically symmetric. Die scaling leads to both manufacturing-driven floorsweeping and cache and memory partitioning. The former creates chip-specific compute topologies, while the latter causes non-uniform memory access. These asymmetries are substantial. Topology-oblivious compute unit allocation can lead to up to 1.33x performance variation, while remote accesses increase HBM latency by up to 67% and nearly double L2 latency. However, these asymmetries are hidden behind the GPU's logical resource abstractions and can vary across chips. We develop lightweight characterization methods to uncover per-chip compute topology and memory affinity. We then use the discovered information to make existing fine-grained scheduling asymmetry-aware, considering not only how many resources are allocated but also which physical resources are assigned. Across full-GPU kernel execution, intra-application multiplexing, and inter-application co-location, asymmetry-aware scheduling improves mainstream kernels by up to 1.22x, multiplexed LLM inference by up to 14.3%, and avoids up to 1.33x performance variation.

cs.AR