Search arXivSearch

arXiv · 1404.2269

Improving soft FEC performance for higher-order modulations via optimized bit channel mappings

Abstract

Soft forward error correction with higher-order modulations is often implemented in practice via the pragmatic bit-interleaved coded modulation paradigm, where a single binary code is mapped to a nonbinary modulation. In this paper, we study the optimization of the mapping of the coded bits to the modulation bits for a polarization-multiplexed fiber-optical system without optical inline dispersion compensation. Our focus is on protograph-based low-density parity-check (LDPC) codes which allow for an efficient hardware implementation, suitable for high-speed optical communications. The optimization is applied to the AR4JA protograph family, and further extended to protograph-based spatially coupled LDPC codes assuming a windowed decoder. Full field simulations via the split-step Fourier method are used to verify the analysis. The results show performance gains of up to 0.25 dB, which translate into a possible extension of the transmission reach by roughly up to 8%, without significantly increasing the system complexity.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Christian Häger, Alexandre Graell i Amat, Fredrik Brännström, Alex Alvarado, Erik Agrell. 2014-06-12. Improving soft FEC performance for higher-order modulations via optimized bit channel mappings. https://doi.org/10.1364/oe.22.014544

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Bistatic Target Detection by Exploiting Both Deterministic Pilots and Unknown Random Data Payloads

Integrated sensing and communication (ISAC) plays a crucial role in 6G, to enable innovative applications such as drone surveillance, urban air mobility, and low-altitude logistics. However, the hybrid ISAC signal, which comprises deterministic pilot and random data payload components, poses challenges for target detection due to two reasons: 1) these two components cause coupled shifts in both the mean and variance of the received signal, and 2) the random data payloads are typically unknown to the sensing receiver in the bistatic setting. Unfortunately, these challenges could not be tackled by existing target detection algorithms. In this paper, a generalized likelihood ratio test (GLRT)-based detector is derived, by leveraging the known deterministic pilots and the statistical characteristics of the unknown random data payloads. Due to the analytical intractability of exact performance characterization, we perform an asymptotic analysis for the false alarm probability and detection probability of the proposed detector. The results highlight a critical trade-off: both deterministic and random components improve detection reliability, but the latter also brings statistical uncertainty that hinders detection performance. Simulations validate the theoretical findings and demonstrate the effectiveness of the proposed detector, which highlights the necessity of designing a dedicated detector to fully exploited the signaling resources assigned to random data payloads.

cs.IT

On Unbiased Parameter Estimation and Signal Reconstruction

In this paper, we extend the theory of depth-unbiased source localization to unbiased parameter estimation and signal reconstruction for an arbitrary number of non-zero parameters. The topic touches on exact reconstructibility, most commonly studied in compressed sensing and multisource estimation across various imaging problems. The theoretical results derive upper bounds on the number of recoverable parameters in the noiseless case, and define a probability measure to assess the likelihood of recovering all non-zero parameters with correct magnitude order. The work provides a mathematical explanation of the open question regarding the noise robustness of standardized and unbiased methods. The paper also reveals a trade-off between the number of sensors and the signal-to-noise ratio. Numerical experiments demonstrate the theoretical findings.

cs.IT

Minimum enclosing Bregman balls made easy

In this work, we revisit the problem of computing minimum enclosing Bregman balls (Bregman MEBs) of finite sets of parameters. First, we show that Bregman MEBs are equivalent to MEBs of corresponding weighted point sets with respect to the power distance. We then report an efficient Frank--Wolfe $(1+ε)$-approximation algorithm for computing power MEBs, for any $ε>0$. This power MEB approximation algorithm coincides with the Bregman MEB approximation algorithm of Nock and Nielsen (2005) when expressed in the dual gradient space. Finally, we show that the Bregman potential lifting transforms used to construct Bregman Voronoi diagrams can be reinterpreted as the classical paraboloid lifting transform applied to corresponding weighted point sets. In particular, Bregman MEB circumcenters lie on the farthest Bregman Voronoi diagrams or equivalently on the corresponding farthest power diagrams.

cs.IT