Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1405.6170

Performance Estimation of 2*3 MIMO-MC-CDMA in Rayleigh Fading Channel

Mr. Atul Singh Kushwah·Mr. Sachin Manglasheril
View original source ↗Read source document ↗Export metadata ↓

Abstract

In this paper we analyze the performance of 2by3 MIMOMCCDMA system in MATLAB which greatly reduces BER by increasing the efficiency of system. MIMO and MCCDMA system arrangement is used to decrease bit error rate and also figure a new system called MCCDMA which is multiple user and multiple access system used to enhance the performance of the system. MCCDMA is a narrowband flat fading in character which changes frequency selective to several narrowband flat fading multiple parallel subcarriers to enhance the effectiveness of the system. Now this MCCDMA further improved by grouping by 2by3 MIMO system which make use of ZF decoder at the receiver to reduce BER in which half rate convolutional encoded Alamouti STBC block code is intended for channel encoding as transmit diversity for MIMO with multiple transmit and receive antennas. Main improvement of using MIMOMCCDMA is for reducing complication of system and also for dropping BER and finally increasing gain of the system. Then we estimate the system in different modulation techniques like, 64QAM, 8PSK, 16QAM, QPSK, 32QAM and 8QAM using MATLAB in Rayleigh fading channel.

Explore related subjects

cs.ITmath.IT

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Mr. Atul Singh Kushwah, Mr. Sachin Manglasheril. 2014-03-12. Performance Estimation of 2*3 MIMO-MC-CDMA in Rayleigh Fading Channel. https://doi.org/10.14445/22312803%2Fijctt-v9p107

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Bistatic Target Detection by Exploiting Both Deterministic Pilots and Unknown Random Data Payloads

Integrated sensing and communication (ISAC) plays a crucial role in 6G, to enable innovative applications such as drone surveillance, urban air mobility, and low-altitude logistics. However, the hybrid ISAC signal, which comprises deterministic pilot and random data payload components, poses challenges for target detection due to two reasons: 1) these two components cause coupled shifts in both the mean and variance of the received signal, and 2) the random data payloads are typically unknown to the sensing receiver in the bistatic setting. Unfortunately, these challenges could not be tackled by existing target detection algorithms. In this paper, a generalized likelihood ratio test (GLRT)-based detector is derived, by leveraging the known deterministic pilots and the statistical characteristics of the unknown random data payloads. Due to the analytical intractability of exact performance characterization, we perform an asymptotic analysis for the false alarm probability and detection probability of the proposed detector. The results highlight a critical trade-off: both deterministic and random components improve detection reliability, but the latter also brings statistical uncertainty that hinders detection performance. Simulations validate the theoretical findings and demonstrate the effectiveness of the proposed detector, which highlights the necessity of designing a dedicated detector to fully exploited the signaling resources assigned to random data payloads.

cs.IT↗
arXiv2026

On Unbiased Parameter Estimation and Signal Reconstruction

In this paper, we extend the theory of depth-unbiased source localization to unbiased parameter estimation and signal reconstruction for an arbitrary number of non-zero parameters. The topic touches on exact reconstructibility, most commonly studied in compressed sensing and multisource estimation across various imaging problems. The theoretical results derive upper bounds on the number of recoverable parameters in the noiseless case, and define a probability measure to assess the likelihood of recovering all non-zero parameters with correct magnitude order. The work provides a mathematical explanation of the open question regarding the noise robustness of standardized and unbiased methods. The paper also reveals a trade-off between the number of sensors and the signal-to-noise ratio. Numerical experiments demonstrate the theoretical findings.

cs.IT↗
arXiv2026

Minimum enclosing Bregman balls made easy

In this work, we revisit the problem of computing minimum enclosing Bregman balls (Bregman MEBs) of finite sets of parameters. First, we show that Bregman MEBs are equivalent to MEBs of corresponding weighted point sets with respect to the power distance. We then report an efficient Frank--Wolfe $(1+ε)$-approximation algorithm for computing power MEBs, for any $ε>0$. This power MEB approximation algorithm coincides with the Bregman MEB approximation algorithm of Nock and Nielsen (2005) when expressed in the dual gradient space. Finally, we show that the Bregman potential lifting transforms used to construct Bregman Voronoi diagrams can be reinterpreted as the classical paraboloid lifting transform applied to corresponding weighted point sets. In particular, Bregman MEB circumcenters lie on the farthest Bregman Voronoi diagrams or equivalently on the corresponding farthest power diagrams.

cs.IT↗