Search arXivSearch

arXiv · 1406.0926

Effect of Spatial Heterogeneity on Near-Limit Propagation of a Stable Detonation

Abstract

The effect of introducing a spatial heterogeneity into an explosive medium is studied computationally by examining the detonation velocity near the limit to propagation in a thin explosive layer. The explosive system studied is an ideal gas with a single exothermic reaction governed by a pressure-dependent reaction rate ($p^n$) with a pressure exponent of $n = 3$. A pressure-dependent reaction rate, rather than the exponential dependence of reaction on temperature of Arrhenius kinetics, is used so that the detonation wave is stable in the homogeneous case and can be modelled with simple, analytical techniques, and thus the effect of introducing heterogeneity can be clearly identified. The two-dimensional slab of explosive is bounded by a layer of inert gas with the same thermodynamic properties as the explosive. The heterogeneity is introduced into the explosive via a large-amplitude, two-dimensional sinusoidal ripple in density in the initialization of the simulation, while maintaining a constant pressure. The computational simulations are initialized with a ZND solution for the ideal CJ detonation, and the detonation is allowed to propagate into the explosive layer. The simulations show that the detonation in the heterogeneous media exhibits a cellular-like structure of complex shock interactions. The detonation is able to propagate into a significantly thinner layer of explosive and can exhibit a greater velocity than the corresponding homogeneous case. A parametric study of varying the wavelength of the sinusoid shows the existence of an optimal size of heterogeneity at which the favorable effect is the greatest corresponding to a wavelength that is approximately 10 to 50 times the half reaction zone length of the ideal CJ detonation. As the wavelength is decreased to the size of the reaction zone length, the behavior reverts back to the homogeneous case.

Explore related subjects

Keep this discovery

BibTeXRIS

Jianling Li, Xiaocheng Mi, Andrew J. Higgins. 2014-06-04. Effect of Spatial Heterogeneity on Near-Limit Propagation of a Stable Detonation. https://arxiv.org/abs/1406.0926

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn