Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1508.03418

Central frequency measurement of the HLS-II storage ring

Jiajun Zheng·Yongliang Yang·Baogen Sun·Fangfang Wu·Chaocai Cheng·Kai Tang
View original source ↗Read source document ↗Export metadata ↓

Abstract

Central frequency is a key parameter of storage rings. This paper presents the measurement of central frequency of the HLS-II storage ring using the sextupole modulation method. Firstly, the basis of central frequency measurement of the electron storage ring is briefly introduced. Then, the error sources and the optimized measurement method for the HLS-II storage ring are discussed. The workflow of the self-compiled Matlab script used in central frequency measurement is also described. In the end, the results achieved by using two methods to cross-check each other are shown. The measured value of the central frequency demonstrates that the real circumference of the HLS-II storage ring agrees well with the designed value.

Explore related subjects

physics.acc-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jiajun Zheng, Yongliang Yang, Baogen Sun, Fangfang Wu, Chaocai Cheng, Kai Tang. 2015-08-14. Central frequency measurement of the HLS-II storage ring. https://doi.org/10.1088/1674-1137%2F40%2F4%2F047005

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

High-Intense Gamma-Ray Emission from a Crystalline Undulator with Realistic Bending Profiles

The development of compact and intense $γ$-ray sources in the MeV energy range remains a significant frontier in radiation physics, with profound implications for nuclear physics, medicine and applied science. In this work, we present a comprehensive numerical investigation of the photon emission probability and brilliance of a Crystalline Undulator (CU) based on a periodically bent Si(110) crystal. Our approach integrates realistic deformation profiles obtained via Finite Element Method simulations of a realistic sample, where bending is induced by patterned Si$_3$N$_4$ surface stressors. Relativistic molecular dynamics simulations, performed using the MBN Explorer software package, consider a 10 GeV positron beam consistent with the foreseen FACET-II facility specifications. Our results reveal a distinct undulator radiation peak in the 1.6-2.1 MeV range, well-separated from the broader channeling radiation background. We show that for an optimal aperture angle of $1/2γ$, the source reaches a maximum peak brilliance of about $5\times10^{22}$~photons/s/mm$^2$/mrad$^2$/0.1\%~BW. This performance is highly competitive with large-scale Gamma-Beam Systems and exceeds that of Inverse-Compton Scattering sources, confirming the potential of crystalline undulators as high-brilliance, compact light sources for the MeV domain.

physics.acc-ph↗
arXiv2026

Simulation study of accelerator-based muography using the GeV-scale forward muon component at SHINE

Muography exploits the penetrating power of muons to image the interior of large dense objects, but cosmic-ray sources provide only ~1 {cm}^{-2} {min}^{-1} predominantly from above, limiting imaging speed and accessible geometries. Electron-driven muon production has recently been demonstrated with laser-wakefield accelerators, but shot-to-shot fluctuations hinder systematic studies required for quantitative accelerator muography. Using Geant4 Monte Carlo simulations, we model the full experimental setup at Shaft 2 of the Shanghai High repetition rate XFEL and Extreme light facility (SHINE), from a 3 GeV, 50 pC, 50 Hz commissioning electron beam interacting with a muon target through 25 m of beamline structures and a 3 m-thick concrete isolation wall. Approximately 0.28 effective reconstructed single-muon events per bunch, with residual kinetic energies below 1.2 GeV after traversing the wall, reach the downstream muography test area (~14 s^{-1}). The wall absorbs most charged background particles below ~1 GeV, while residual neutrons can be discriminated by their characteristic detector energy deposition. Scattering-tomography simulations show that $3\times 10^{5}$ effective muon events, accumulated in approximately 6 h at the commissioning rate, yield a Structural Similarity Index above 0.9, demonstrating the feasibility of quantitative accelerator-based muography using SHINE's electron-driven GeV-scale forward muon source. At the 8 GeV/50 kHz benchmark, the projected muon intensity exceeds $5 \times 10^{4}$ μ/s, corresponding conservatively to approximately one muon per bunch at the detector. This exceeds the cosmic-ray flux by orders of magnitude, while SHINE's superconducting linac provides a stable, controlled platform for developing electron-on-target muography.

physics.acc-ph↗
arXiv2026

Progress in Muon Cooling and Moderation Techniques

Muon beams are essential tools for a wide range of applications such as the search for rare muon decays and muon spectroscopy. However, conventional muon beams produced from pion decay have large emittance and broad momentum spread. Conventional beam-cooling techniques cannot improve the beam quality significantly owing to the 2.2 $μ$s muon mean lifetime. This has motivated the development of dedicated muon beam cooling and moderation methods. This review surveys the principal approaches, including ionisation cooling for high-brightness muon beams, low-energy muon moderation and frictional cooling for slow muon production, and laser ionisation of thermal muonium for ultra-low-emittance muon sources. The challenges associated with producing slow negative muons and emerging concepts based on cyclotron trapping and muon-catalysed fusion are also discussed. These complementary techniques offer promising pathways towards next-generation muon facilities and precision experiments.

physics.acc-ph↗