Search arXivSearch

arXiv · 1511.07844

The Silicon Vertex Tracker for the Heavy Photon Search Experiment

Abstract

The Heavy Photon Search (HPS) is a new, dedicated experiment at Thomas Jefferson National Accelerator Facility (JLab) to search for a massive vector boson, the heavy photon (a.k.a. dark photon, \Aprimebold{}), in the mass range 20-500~MeV/c$^{2}$ and with a weak coupling to ordinary matter. An \Aprimebold{} can be radiated from an incoming electron as it interacts with a charged nucleus in the target, accessing a large open parameter space where the \Aprimebold{} is relatively long-lived, leading to displaced vertices. HPS searches for these displaced \Aprimebold{} to e$^+$e$^-$ decays using actively cooled silicon microstrip sensors with fast readout electronics placed immediately downstream of the target and inside a dipole magnet to instrument a large acceptance with a relatively small detector. With typical particle momenta of 0.5-2~GeV/c, the low material budget of 0.7\% $\mathbf{X_0}$ per tracking layer is key to limiting the dominant multiple scattering uncertainty and allowing efficient separation of the decay vertex from the prompt QED trident background processes. Achieving the desired low-mass acceptance requires placing the edge of the silicon only 0.5~mm from the electron beam. This results in localized hit rates above 4~MHz/mm$^2$ and radiation levels above $\mathbf{10^{14}}$ 1~MeV neutron equivalent /cm$^2$ dose. Hit timing at the ns level is crucial to reject out-of time hits not associated with the \Aprimebold{} decay products from the almost continuous CEBAF accelerator beam. To avoid excessive beam-gas interactions the tracking detector is placed inside the accelerator beam vacuum envelope and is retractable to allow safe operation in case of beam motion. This contribution will discuss the design, construction and first performance results from the first data-taking period in the spring of 2015.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Per Hansson Adrian. 2015-11-24. The Silicon Vertex Tracker for the Heavy Photon Search Experiment. https://doi.org/10.1109/nssmic.2015.7581862

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det