Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1511.09239

Efficient treatment of stacked metasurfaces for optimizing and enhancing the range of accessible optical functionalities

Christoph Menzel·Jan Sperrhake·Thomas Pertsch
View original source ↗Read source document ↗Export metadata ↓

Abstract

We present, discuss and validate an adapted S-matrix formalism for an efficient, simplified treatment of stacked homogeneous periodically structured metasurfaces operated under normally incident plane wave excitation. The proposed formalism can be applied to any material system, arbitrarily shaped metaatoms, at any frequency and with arbitrary subwavelength periods. Circumventing the introduction of any kind of effective parameters we directly use the S-parameters of the individual metasurfaces to calculate the response of an arbitrary stack. In fact, the S-parameters are the complex parameters of choice fully characterizing the homogeneous metasurfaces, in particular with respect to its polarization manipulating properties. Just as effective material parameters like the permittivity and the permeability or wave parameters like the propagation constant and the impedance, the stacking based upon S-matrices can be applied as long as the individual layers are decoupled with respect to their near-fields. This requirement eventually sets the limits for using the optical properties of the individual layers to calculate the response of the stacked system - this being the conceptual aim for any homogeneous metasurface or metamaterial layer and therefore the essence of what is eventually possible with homogeneous metasurfaces. As simple and appealing this approach is, as powerful it is as well: Combining structured metasurface with each other as well as with isotropic, anisotropic or chiral homogeneous layers is possible by simple semi-analytical S-matrix multiplication. Hence, complex stacks and resonators can be set up, accurately treated and optimized with respect to their dispersive polarization sensitive optical functionality without the need for further rigorous full-wave simulations.

Explore related subjects

physics.optics

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Christoph Menzel, Jan Sperrhake, Thomas Pertsch. 2015-11-30. Efficient treatment of stacked metasurfaces for optimizing and enhancing the range of accessible optical functionalities. https://doi.org/10.1103/physreva.93.063832

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Exoplanet Detection Using Adaptive Quantum-Optimal Measurement

Detecting terrestrial exoplanets in the habitable zones of nearby stars remains a critical challenge. Such planets can be \(10^8\) to \(10^{10}\) times fainter than their host stars and lie at diffraction-limited angular separations, where starlight strongly obscures the companion signal. Here we present an adaptive quantum measurement method for estimating the number, positions, and brightnesses of mutually incoherent point sources in the sub-Rayleigh, ultra-high-contrast regime, operating at contrasts down to \(10^{-8}\) -- five orders of magnitude beyond previous quantum imaging approaches to exoplanet detection. The method adopts a spatial-mode basis that is updated to maximize the quantum Fisher information per detected photon. Estimation is performed by maximum likelihood in log-brightness coordinates, and the source count is determined by Bayesian-information-criterion (BIC) model selection directly from photon-count statistics, without a tunable detection threshold. For point sources within sub-Rayleigh separations and with brightness ratios spanning eight orders of magnitude, the method reconstructs complete scenes with a mean success rate of \(72.5\%\). Furthermore, it is robust to misalignment, maintaining a \(71.3\%\) success rate under offsets of up to six pixels. These results demonstrate that terrestrial exoplanets can be detected below the Rayleigh limit, a regime previously inaccessible to direct imaging.

physics.optics↗
arXiv2026

Research and simulation of analytical polarization control enabled by optical computing on an integrated photonics chip

Dynamic polarization controllers are key devices with broad applications in many fields. However, most on-chip polarization controllers still rely on traditional blind-search methods, whereas analytical optical-computing approaches remain insufficiently explored, particularly with respect to calibration and endless polarization control. With the accurate relative phase of Mach-Zehnder interferometer (MZI) being fully controllable on an integrated photonics chip, we present an analytical polarization control (APC) method using four phase shifters and optical computing, eliminating the need for the traditional inefficient blind-search procedure. The basic structures and operations of APC are clarified. The proposed calibration method and endless control method enable continuous APC while compensating for phase differences within the MZI structures. We simulate the influence of the endless control unit on polarization control and quantify the effect of the fourth phase difference on the output extinction ratio. With the fourth phase shifter, the phase difference encountered during Stokes vector measurement can be effectively compensated, and rotations around all three axes on the Poincaré sphere can be realized. These results establish a practical APC architecture based on optical computing for photonics chips. The proposed APC methods, combined with a FPGA-based hardware acceleration, will enable high speed on-chip polarization controllers.

physics.optics↗
arXiv2026

Optical Mode Sorting with a Programmable Diffractive Neural Network

Programmable diffractive optical processors are particularly attractive for spatial light manipulation because their optical transformations can be dynamically reconfigured and adapted without modifying the physical hardware. However, their practical performance is often limited by the gap between simulation and experiment caused by optical aberrations, alignment errors, and nonideal phase responses. In this paper, we introduce a hybrid optimization framework that combines high-dimensional numerical design with low-dimensional hardware-in-the-loop calibration, enabling programmable diffractive optical networks to compensate experimentally for mismatch without retraining their underlying optical transformations. We demonstrate a programmable optical diffractive neural network (ODNN) designed by back-propagation to spatially sort six linearly polarized modes supported by a multimode fiber. The experimental distortions are represented using a truncated Zernike basis with only 19 correction coefficients per layer. These coefficients are optimized directly on the physical system using stochastic parallel gradient descent, avoiding re-optimization of the full pixelated phase masks. Experimentally, the proposed calibration yields an SNR improvement of approximately 3.26 dB, and a decrease in amplitude error of 0.04. This separation of high-dimensional optical-function design from low-dimensional physical calibration provides a scalable route towards adaptive and reconfigurable spatial-mode processors for optical router on spatial modes and wavelengths, programmable photonic computer systems and quantum information processing.

physics.optics↗