Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1601.01463

Design of a Low-Power 1.65 Gbps Data Channel for HDMI Transmitter

Ajay Agrawal·R. S. Gamad
View original source ↗Read source document ↗Export metadata ↓

Abstract

This paper presents a design of low power data channel for application in High Definition Multimedia Interface (HDMI) Transmitter circuit. The input is 10 bit parallel data and output is serial data at 1.65 Gbps. This circuit uses only a single frequency of serial clock input. All other timing signals are derived within the circuit from the serial clock. This design has dedicated lines to disable and enable all its channels within two pixel-clock periods only. A pair of disable and enable functions performed immediately after power-on of the circuit serves as the reset function. The presented design is immune to data-dependent switching spikes in supply current and pushes them in the range of serial frequency and its multiples. Thus filtering requirements are relaxed. The output stage uses a bias voltage of 2.8 volts for a receiver pull-up voltage of 3.3 volts. The reported data channel is designed using UMC 180 nm CMOS Technology. The design is modifiable for other inter-board serial interfaces like USB and LAN with different number of bits at the parallel input.

Explore related subjects

cs.AR

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Ajay Agrawal, R. S. Gamad. 2016-01-07. Design of a Low-Power 1.65 Gbps Data Channel for HDMI Transmitter. https://doi.org/10.5121/vlsic.2015.6603

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Bi-SamplerZ: A Rejection-Aware Cooperative Gaussian Sampling Framework for Falcon Signature Hardware

We present Bi-SamplerZ, a rejection-aware cooperative sampling framework that converts this idle capacity into useful computation. After an asymmetric accept/reject outcome, Bi- SamplerZ latches the completed logical result and dynamically reassigns the released physical datapath to the unfinished target. The two paths then evaluate fresh independent candidates for the same remaining distribution. We show that this post-rejection cooperation increases the assisted-round completion probability without modifying the underlying candidate distribution or Bernoulli acceptance rule, and we state the randomness-allocation conditions required to preserve the joint output distribution of the original pair of logical sampler calls

cs.AR↗
arXiv2026

A Multi-Engine Dataflow for MoE Decoding on Scratchpad-Based Tensor Accelerators

Mixture-of-Experts (MoE) decoding on scratchpad-based tensor accelerators (STA) is dominated by moving expert weights while the compute engines sit idle. This traffic is hard to hide, because the experts are known only after routing, and hard to shrink without losing quality or adding critical-path work. We present CARDAN, which represents each expert-weight matrix as a vector-quantized component plus a shared-basis low-rank component and co-designs this representation with a multi-engine decoding dataflow. The representation separates expert-common from expert-private work, so the dataflow overlaps DMA with computation on several engines. Across five MoE families on AWS Trainium3, CARDAN matches or improves BF16-teacher perplexity across all five models and speeds up batch-one decoding by 1.15-1.31x over AWS dense MoE megakernels, rising to 1.7x at batch size 16.

cs.AR↗
arXiv2026

Dissecting How Die Scaling Breaks GPU Fine-grained Scheduling

Modern GPUs are no longer physically symmetric. Die scaling leads to both manufacturing-driven floorsweeping and cache and memory partitioning. The former creates chip-specific compute topologies, while the latter causes non-uniform memory access. These asymmetries are substantial. Topology-oblivious compute unit allocation can lead to up to 1.33x performance variation, while remote accesses increase HBM latency by up to 67% and nearly double L2 latency. However, these asymmetries are hidden behind the GPU's logical resource abstractions and can vary across chips. We develop lightweight characterization methods to uncover per-chip compute topology and memory affinity. We then use the discovered information to make existing fine-grained scheduling asymmetry-aware, considering not only how many resources are allocated but also which physical resources are assigned. Across full-GPU kernel execution, intra-application multiplexing, and inter-application co-location, asymmetry-aware scheduling improves mainstream kernels by up to 1.22x, multiplexed LLM inference by up to 14.3%, and avoids up to 1.33x performance variation.

cs.AR↗