Search arXivSearch

arXiv · 1605.07306

Fluid forces or impacts: What governs the entrainment of soil particles in sediment transport mediated by a Newtonian fluid?

Abstract

In steady sediment transport, sediment deposition is balanced by entrainment of bed particles by fluid forces or particle-bed impacts. Here we propose a proxy to determine the role of impact entrainment relative to entrainment by the mean turbulent flow: the "bed velocity" $V_b$, which is an effective near-bed-surface value of the average horizontal particle velocity that generalizes the classical slip velocity, used in studies of aeolian saltation transport, to sediment transport in an arbitrary Newtonian fluid. We study $V_b$ for a wide range of the particle-fluid-density ratio $s$, Galileo number $\mathrm{Ga}$, and Shields number $Θ$ using direct sediment transport simulations. We find that transport is fully sustained through impact entrainment (i.e., $V_b$ is constant in natural units) when the "impact number" $\mathrm{Im}=\mathrm{Ga}\sqrt{s+0.5}\gtrsim20$ or $Θ\gtrsim5/\mathrm{Im}$. These conditions are obeyed for the vast majority of transport regimes, including steady turbulent bedload, which has long been thought to be sustained solely through fluid entrainment. In fact, we find that transport is fully sustained through fluid entrainment (i.e., $V_b$ scales with the near-bed horizontal fluid velocity) only for sufficiently viscous bedload transport at grain scale (i.e., for $\mathrm{Im}\lesssim20$ and $Θ\lesssim1/\mathrm{Im}$). Finally, we do not find a strong correlation between, $V_b$, or the classical slip velocity, and the transport-layer-averaged horizontal particle velocity $\overline{v_x}$, which challenges the long-standing consensus that predominant impact entrainment is responsible for a linear scaling of the transport rate with $Θ$. For turbulent bedload in particular, $\overline{v_x}$ increases with $Θ$ despite $V_b$ remaining constant, which we propose is linked to the formation of a liquid-like bed on top of the static-bed surface.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Thomas Pähtz, Orencio Durán. 2017-07-19. Fluid forces or impacts: What governs the entrainment of soil particles in sediment transport mediated by a Newtonian fluid?. https://doi.org/10.1103/physrevfluids.2.074303

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Assessing foundational atomistic models for iron alloys under Earth's core conditions

We assess the capability of recently developed foundational atomistic models (FAMs) to simulate iron alloys under the extreme pressures and temperatures of Earth's core. Static equations of state for hexagonal close-packed (hcp) and body-centered cubic (bcc) iron, computed using 17 FAMs, are benchmarked against ab initio calculations. Two representative models, MatterSim and MACE, are further evaluated for their ability to reproduce phonon spectra, liquid structure, and melting relations of iron at core conditions. While both models capture several key properties, MACE substantially overestimates the stability of bcc iron and fails to correctly describe the stability of hcp iron. Their performance is also examined for binary liquids, superionic phases, and a seven-component Fe-Ni-Si-S-O-H-C liquid. Although these FAMs were not explicitly trained on data from core conditions, they can reproduce several structural and dynamical properties across a wide range of compositions. However, none of the tested models consistently reproduces all first-principles benchmarks. By analyzing the origins of these discrepancies, we identify several limitations of current FAMs, particularly the lack of an explicit treatment of thermal electronic excitations, which significantly affect phase stability and thermodynamic properties under core conditions. We further discuss directions for improving FAMs to enable predictive simulations of core-forming materials under extreme conditions.

physics.geo-ph

Time-Resolved Surface-Fault Displacement During the 2026 Kumamoto Earthquake From Near-Fault Video

Video recordings can reveal how rapidly fault displacement develops at the Earth's surface, but camera motion and recording artifacts can obscure the ground signal. We analyze a secondary copy of security-camera footage that captured surface displacement during the 28 July 2026 Kumamoto earthquake; the native recording was unavailable and could not be recovered. Two independent image-tracking methods were used. Optical flow follows identifiable image features, whereas normalized cross-correlation (NCC) template matching follows fixed image patches by their similarity. Both measured target-region motion relative to spatially separated reference regions while correcting motion shared by the recording. Image displacement was calibrated to the magnitude of the field-measured offset vector: 1.05 m right-lateral and 0.90 m east-side-up, or 1.383 m in total. We characterize the principal rise by the time required for displacement to progress from 20% to 80% of the selected final level. Across prespecified endpoint choices, optical flow gives 0.866-0.901 s and NCC gives 0.910-0.928 s. These durations correspond to average rates of 0.920-0.958 and 0.895-0.912 m/s, respectively. Checks using independently published tracking windows reproduce the displacement scale, although exact timing is more sensitive in spatially restricted tests. The record also shows an early apparent peak and decline followed by renewed apparent horizontal displacement. Because that later motion may represent either continued ground displacement or the geometry of the secondary recording, neither the permanent endpoint nor physical overshoot can be determined. The most robust conclusion is that the central part of the surface displacement developed in approximately 0.9 s at an average rate near 0.9 m/s.

physics.geo-ph

Shape matters: DEM investigation of geometry-controlled mechanical response in irregular rock fragments under static and dynamic loading

Mechanical characterization of subsurface rock formations typically requires standardized cylindrical core specimens, which are often unavailable from fractured or unconventional reservoir sequences. This study uses a Discrete Element Method (DEM) framework calibrated to Sulphur Mountain Formation siltstone to investigate how fragment geometry governs mechanical response in irregular rock particles, which are direct analogues of drill cuttings. Nineteen specimens (18 procedurally generated irregular geometries and one reference Brazilian disk), normalized to a 10 mm bounding sphere radius, were tested under quasi-static (Brazilian-type) and dynamic (Short Impact Load Cell) loading modes. Four mechanical outputs of failure force (Ff), apparent strength (σf), apparent stiffness (Ka), and stiffness (E) were regressed against seven retained shape descriptors. Results show that force-based quantities are strongly controlled by the surface-area-to-volume (SA/V) ratio under static loading (Adj. R2 = 0.69), while area-normalized quantities (σf and E) are geometrically insensitive. Dynamic loading amplifies geometric sensitivity for failure force and introduces an independent role for surface concavity depth. These findings establish a preliminary quantitative framework for interpreting mechanical measurements from irregular rock fragments when a standardized core is unavailable.

physics.geo-ph