Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1609.08809

Dynamically creating tripartite resonance and dark modes in a multimode optomechanical system

E. Damskägg·J. -M. Pirkkalainen·M. A. Sillanpää
View original source ↗Read source document ↗Export metadata ↓

Abstract

We study a multimode optomechanical system where two mechanical oscillators are coupled to an electromagnetic cavity. Previously it has been shown that if the mechanical resonances have nearly equal frequencies, one can make the oscillators to interact via the cavity by strong pumping with a coherent pump tone. One can view the interaction also as emergence of an electromagnetically dark mode which gets asymptotically decoupled from the cavity and has a linewidth much smaller than that of the bare cavity. The narrow linewidth and long lifetime of the dark mode could be advantageous for example in information storage and processing. Here we investigate the possibility to create dark modes dynamically using two pump tones. We show that if the mechanical frequencies are intrinsically different, one can bring the mechanical oscillators and the cavity on-resonance and thus create a dark mode by double sideband pumping of the cavity. We realize the scheme in a microwave optomechanical device employing two drum oscillators with unmatched frequencies, ω_1 /2π = 8.1MHz and ω_2 /2π = 14.2MHz. We also observe a breakdown of the rotating-wave approximation, most pronounced in another device where the mechanical frequencies are close to each other.

Explore related subjects

cond-mat.mes-hallphysics.opticsquant-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

E. Damskägg, J. -M. Pirkkalainen, M. A. Sillanpää. 2016-09-28. Dynamically creating tripartite resonance and dark modes in a multimode optomechanical system. https://doi.org/10.1088/2040-8978%2F18%2F10%2F104003

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Electrostatic edge effects versus edge doping in graphene nanoribbons: a scanning gate microscopy and modelling study

The charge neutrality point (CNP) of graphene nanoribbons (GNRs) patterned by oxygen plasma etching moves towards zero as the ribbon narrows and, on 300 nm SiO2, changes sign below a crossover width of ~ 50 nm: an observation previously attributed to n-type edges surrounding a p-type bulk. We test this edge-doping hypothesis in three ways. First, finite element modelling of complete GNR transistors with uniform doping shows that fringing of the gate field at the edges reproduces the trend of the measured CNP with width down to ~ 50nm without any edge doping, while producing a bias-dependent inversion of the carrier type at the edges that mimics n-type edges in scanned-probe measurements. Second, fitting the CNP of ribbons on 90 nm and 300 nm SiO2 with the gate capacitance of a finite strip, which fixes the electrostatic contribution with no adjustable parameter other than the bulk doping, shows that fringing accounts for most of the width dependence and isolates the remainder as an edge charge. This is acceptor-like (0.24 e/nm per edge) in the present ribbons, which therefore have no n-type edges, and donor-like but small in devices on 300 nm SiO2; no single edge-charge, field-coupled or contact-doping mechanism describes both. Third, scanning gate microscopy finds no edge contrast of the sign expected for n-type edges. The width dependence of the CNP is therefore predominantly electrostatic, and n-type edges are not an intrinsic consequence of oxygen-plasma etching. A design map shows that fringing dominates the width dependence whenever the gate dielectric is thicker than 30-50 nm, whereas in scaled high-K transistors, edge charge dominates and would shift the threshold voltage of a 10 nm ribbon by ~ 0.1-0.15 V. Fitting the CNP versus width with the strip capacitance provides a simple test for edge doping in any gated two-dimensional nanostructure

cond-mat.mes-hall↗
arXiv2026

Parity-driven RKKY decoupling and anomalous $1/R$ Dzyaloshinskii-Moriya interaction in odd-parity magnets

Unconventional odd-parity magnets, characterized by an odd-parity momentum-dependent spin splitting, offer a fundamentally distinct paradigm for non-collinear spintronics. Here, we theoretically investigate the Ruderman-Kittel-Kasuya-Yosida indirect exchange in two-dimensional odd-parity magnets subjected to Rashba spin-orbit coupling. Using an analytical real-space Green's function formalism, we uncover a parity-driven spatial decoupling in the magnetic response. Because of the odd-parity exchange field, the out-of-plane Ising interaction is structurally insulated from the macroscopic magnetic modulation, oscillating isotropically at the shifted Fermi wavevector. Conversely, the in-plane Heisenberg components exhibit pronounced, directionally tunable spatial beating. Beyond collinear exchange, the hybridized bands generate a highly tunable, three-component Dzyaloshinskii-Moriya interaction alongside symmetric off-diagonal anisotropies. We reveal that the out-of-plane chiral twisting is driven by the massive, nonrelativistic momentum shift, while the in-plane chiral components are relativistic. Furthermore, the competition between the nodal geometry and the Rashba gap drives an anomalous, dimension-reducing crossover, in which the in-plane chiral components follow a 1D-like $1/R$ spatial decay along the nodal lines over an extended intermediate-distance window before ultimately recovering the conventional 2D $1/R^2$ asymptote. We demonstrate that these findings hold universally across the odd-parity class by explicitly generalizing our framework to $f$-wave magnets. Finally, numerical tight-binding calculations verify the striking robustness of this parity-driven decoupling against both scalar and random magnetic exchange disorder. These findings establish odd-parity magnets as promising platforms for engineering robust, directionally tunable non-collinear spin textures.

cond-mat.mes-hall↗
arXiv2026

Ferroelastic Reversal Magnon Thermal Hall Effect in a Fully Compensated Ferrimagnet

Magnons offer a charge-neutral channel for spin and heat transport, yet reversible and nonvolatile control of their thermal Hall response poses a fundamental challenge in systems with zero net magnetization. Here, we establish ferroelastic switching as an effective route to manipulate magnonic transverse responses in fully compensated ferrimagnets. A minimal Heisenberg-Dzyaloshinskii-Moriya model reveals that ferroelastic switching can re-orientate the lattice anisotropy, which reconstructs the chirality-resolved magnon bands and Berry curvature distribution. Consequently, the two orthogonal fully compensated ferrimagnetic variants related by [C2||C4z] exhibit magnon thermal Hall responses with opposite signs, whereas the response vanishes in the intermediate altermagnetic phase. First-principles calculations further identify monolayer V2SSe as a promising material candidate for realizing the proposed ferroelastic control of transverse magnon transport. Remarkably, ferroelastic switching drives a dual magnonic-electronic band reconstruction, enabling nonvolatile reversal of the magnon thermal Hall effect while producing anisotropic orbital Hall responses and distinct magneto-optical spectra as complementary transport and optical fingerprints. Our findings establish ferroelasticity as an effective route to nonvolatile magnon control and multichannel state identification in zero net magnetization systems.

cond-mat.mes-hall↗