Achievable Rate and Energy Efficiency of Hybrid and Digital Beamforming Receivers with Low Resolution ADC

Kilian Roth; Josef A. Nossek

Home/Archive/arXiv

arXiv · 1610.02909

Achievable Rate and Energy Efficiency of Hybrid and Digital Beamforming Receivers with Low Resolution ADC

Kilian Roth·Josef A. Nossek

View original source ↗Read source document ↗Export metadata ↓

Abstract

For 5G it will be important to leverage the available millimeter wave spectrum. To achieve an approximately omni- directional coverage with a similar effective antenna aperture compared to state of the art cellular systems, an antenna array is required at both the mobile and basestation. Due to the large bandwidth and inefficient amplifiers available in CMOS for mmWave, the analog front-end of the receiver with a large number of antennas becomes especially power hungry. Two main solutions exist to reduce the power consumption: Hybrid BeamForming (HBF) and Digital BeamForming (DBF) with low resolution ADC. Hybrid beamforming can also be combined with low resolution ADCs. This paper compares the spectral and energy efficiency based on the chosen RF-frontend configuration. A channel with multipath propagation is used. In contrast to previous publication, we take the spatial correlation of the quantization noise into account. We show that the low resolution ADC are robust to small Automatic Gain Control (AGC) imperfections. We showed that in the low SNR regime the performance of DBF even with 1-2 bit resolution outperforms HBF. If we consider the relationship of spectral and energy efficiency then DBF with 3-5 bits resolution achieves the best ratio of spectral efficiency per power consumption of the RF receiver frontend over a very wide SNR region. The power consumption model is based on components reported in literature.

Explore related subjects

cs.IT math.IT

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Kilian Roth, Josef A. Nossek. 2017-04-26. Achievable Rate and Energy Efficiency of Hybrid and Digital Beamforming Receivers with Low Resolution ADC. https://arxiv.org/abs/1610.02909

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Bistatic Target Detection by Exploiting Both Deterministic Pilots and Unknown Random Data Payloads

Integrated sensing and communication (ISAC) plays a crucial role in 6G, to enable innovative applications such as drone surveillance, urban air mobility, and low-altitude logistics. However, the hybrid ISAC signal, which comprises deterministic pilot and random data payload components, poses challenges for target detection due to two reasons: 1) these two components cause coupled shifts in both the mean and variance of the received signal, and 2) the random data payloads are typically unknown to the sensing receiver in the bistatic setting. Unfortunately, these challenges could not be tackled by existing target detection algorithms. In this paper, a generalized likelihood ratio test (GLRT)-based detector is derived, by leveraging the known deterministic pilots and the statistical characteristics of the unknown random data payloads. Due to the analytical intractability of exact performance characterization, we perform an asymptotic analysis for the false alarm probability and detection probability of the proposed detector. The results highlight a critical trade-off: both deterministic and random components improve detection reliability, but the latter also brings statistical uncertainty that hinders detection performance. Simulations validate the theoretical findings and demonstrate the effectiveness of the proposed detector, which highlights the necessity of designing a dedicated detector to fully exploited the signaling resources assigned to random data payloads.

cs.IT↗

arXiv2026

On Unbiased Parameter Estimation and Signal Reconstruction

In this paper, we extend the theory of depth-unbiased source localization to unbiased parameter estimation and signal reconstruction for an arbitrary number of non-zero parameters. The topic touches on exact reconstructibility, most commonly studied in compressed sensing and multisource estimation across various imaging problems. The theoretical results derive upper bounds on the number of recoverable parameters in the noiseless case, and define a probability measure to assess the likelihood of recovering all non-zero parameters with correct magnitude order. The work provides a mathematical explanation of the open question regarding the noise robustness of standardized and unbiased methods. The paper also reveals a trade-off between the number of sensors and the signal-to-noise ratio. Numerical experiments demonstrate the theoretical findings.

cs.IT↗

arXiv2026

Minimum enclosing Bregman balls made easy

In this work, we revisit the problem of computing minimum enclosing Bregman balls (Bregman MEBs) of finite sets of parameters. First, we show that Bregman MEBs are equivalent to MEBs of corresponding weighted point sets with respect to the power distance. We then report an efficient Frank--Wolfe $(1+ε)$-approximation algorithm for computing power MEBs, for any $ε>0$. This power MEB approximation algorithm coincides with the Bregman MEB approximation algorithm of Nock and Nielsen (2005) when expressed in the dual gradient space. Finally, we show that the Bregman potential lifting transforms used to construct Bregman Voronoi diagrams can be reinterpreted as the classical paraboloid lifting transform applied to corresponding weighted point sets. In particular, Bregman MEB circumcenters lie on the farthest Bregman Voronoi diagrams or equivalently on the corresponding farthest power diagrams.

cs.IT↗