Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1701.03032

ALMA Long Baseline Campaigns: Phase Characteristics of Atmosphere at Long Baselines in the Millimeter and Submillimeter Wavelengths

Satoki Matsushita·Yoshiharu Asaki·Edward B. Fomalont·Koh-Ichiro Morita·Denis Barkats·Richard E. Hills·Ryohei Kawabe·Luke T. Maud·Bojan Nikolic·Remo P. J. Tilanus·Catherine Vlahakis·Nicholas D. Whyborn
View original source ↗Read source document ↗Export metadata ↓

Abstract

This paper presents the first detailed investigation of the characteristics of mm/submm phase fluctuation and phase correction methods obtained using ALMA with baseline lengths up to ~15 km. Most of the spatial structure functions (SSFs) show that the phase fluctuation increases as a function of baseline length, with a power-law slope of ~0.6. In many cases, we find that the slope becomes shallower (average of ~0.2-0.3) at baseline lengths longer than ~1 km, namely showing a turn-over in SSF. The phase correction method using water vapor radiometers (WVRs) works well, especially for the cases where PWV >1 mm, which reduces the degree of phase fluctuations by a factor of two in many cases. However, phase fluctuations still remain after the WVR phase correction, suggesting the existence of other turbulent constituent that cause the phase fluctuation. This is supported by occasional SSFs that do not exhibit any turn-over; these are only seen when the PWV is low or after WVR phase correction. This means that the phase fluctuation caused by this turbulent constituent is inherently smaller than that caused by water vapor. Since there is no turn-over in the SSF up to the maximum baseline length of ~15 km, this turbulent constituent must have scale height of 10 km or more, and thus cannot be water vapor, whose scale height is around 1 km. This large scale height turbulent constituent is likely to be water ice or a dry component. Excess path length fluctuation after the WVR phase correction at a baseline length of 10 km is large (>200 micron), which is significant for high frequency (>450 GHz or <700 micron) observations. These results suggest the need for an additional phase correction method, such as fast switching, in addition to the WVR phase correction. We simulated the fast switching, and the result suggests that it works well, with shorter cycle times linearly improving the coherence.

Explore related subjects

astro-ph.IM

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Satoki Matsushita, Yoshiharu Asaki, Edward B. Fomalont, Koh-Ichiro Morita, Denis Barkats, Richard E. Hills, Ryohei Kawabe, Luke T. Maud, Bojan Nikolic, Remo P. J. Tilanus, Catherine Vlahakis, Nicholas D. Whyborn. 2017-01-11. ALMA Long Baseline Campaigns: Phase Characteristics of Atmosphere at Long Baselines in the Millimeter and Submillimeter Wavelengths. https://doi.org/10.1088/1538-3873%2Faa5787

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Observations of Binary Stars with the 1.3-m Devasthal Fast Optical Telescope Using Speckle Interferometry: An Attempt

We present a feasibility study of implementing optical interferometry and speckle techniques with the 1.3-m Devasthal Fast Optical Telescope (DFOT) at Aryabhatta Research Institute of Observational Sciences (ARIES), which is currently dedicated to photometric observations. Using the sCMOS camera at the DFOT backend, we perform interferometric speckle observations of six binary stars. Standard Speckle Interferometry algorithms are applied to analyze the recorded speckle images. While this study does not aim to achieve the diffraction limit of DFOT or address a full science-driven resolution case, it serves as a crucial testbed for instrumentation, data acquisition, and analysis of Speckles with DFOT. Although the individual speckle patterns exhibit significant positional variations from frame to frame, the Speckle Interferometry analysis successfully recovers the characteristic three-peak structure of the wide binaries, allowing their relative separations and position angles to be determined, demonstrating the viability of the approach. The measured angular relative separations of $γ$ Leo, $γ$ Vir, and $ζ$ Her are $4.744'' \pm 0.012''$, $3.387'' \pm 0.027''$, and $1.582'' \pm 0.026''$, respectively, with corresponding projected position angles of $126.94^{\circ} \pm 0.14^\circ$, $171.57^{\circ} \pm 0.33^\circ$, and $81.06^{\circ} \pm 0.91^\circ$. These measurements are consistent with previously reported values in the literature, which provides strong motivation for more systematic observations and future implementation of optical interferometry techniques at meter-class telescopes.

astro-ph.IM↗
arXiv2026

Time-Domain Synthesis of Gravitational-Wave Detector Glitches using Class-Conditional Derivative Generative Adversarial Networks

Gravitational-wave detectors such as LIGO, Virgo, and KAGRA are highly sensitive instruments susceptible to many noise sources. Short-duration transient noise events, known as glitches, pose a particular challenge for data analysis pipelines, as they can mimic or obscure astrophysical signals. We present GlitchGAN, a class-conditional generative model built on the Conditional Derivative GAN (cDVGAN) architecture, capable of synthesizing seven glitch types from LIGO's third observing run (O3) directly in the time domain. GlitchGAN generalizes effectively, learning to reproduce a diverse glitch space consistent with high-quality DeepExtractor reconstructions, and can generate hybrid glitch morphologies by interpolating across its class-conditioning vector. It generates 1000 glitches in under 22 seconds on a CPU, suitable for detector simulations, mock data challenges, and pipeline validation. Synthetic glitches are validated using the Gravity Spy classifier and UMAP embeddings, both showing strong agreement with real data. To probe residual distributional differences, we train a separate holdout GlitchGAN model and use a downstream CNN to distinguish held-out real glitches from synthetic ones: detectability is high in a clean representation but drops substantially once both populations are injected into realistic detector noise, the condition under which they would typically be used. Despite this, GlitchGAN-generated glitches remain practically useful: augmenting real training sets with synthetic samples matches simple duplication of real data when data is abundant, and increasingly outperforms it as real data becomes scarce. Finally, we highlight a limitation of magnitude-only spectrograms: magnitude Q-transform classifiers can confidently misclassify physically unrealistic glitches from less robust models, underscoring the need for validation methods that preserve phase information.

astro-ph.IM↗
arXiv2026

SGN: A python framework for stream-processing pipelines

We present the Stream Graph Navigator (SGN), a lightweight Python framework for building streaming data applications. In SGN, stream-processing pipelines are built by connecting computational components into directed acyclic graphs that run within an event loop. The time-series extension of the SGN library, SGN-TS, introduces signal processing methods to handle time series data. Together, SGN and SGN-TS provide the foundation for SGNL, a matched-filtering gravitational-wave search pipeline, and are being adopted by multiple projects across the low-latency gravitational-wave data analysis infrastructure as an extensible and maintainable framework for future gravitational-wave observations.

astro-ph.IM↗