Real-Time Impulse Noise Removal from MR Images for Radiosurgery Applications

Zohreh HosseinKhani; Mohsen Hajabdollahi; Nader Karimi; S. M. Reza Soroushmehr; Shahram Shirani; Shadrokh Samavi; Kayvan Najarian

arXiv · 1707.05975

Real-Time Impulse Noise Removal from MR Images for Radiosurgery Applications

Zohreh HosseinKhani·Mohsen Hajabdollahi·Nader Karimi·S. M. Reza Soroushmehr·Shahram Shirani·Shadrokh Samavi·Kayvan Najarian

View original source ↗Read source document ↗Export metadata ↓

Abstract

In the recent years image processing techniques are used as a tool to improve detection and diagnostic capabilities in the medical applications. Medical applications have been so much affected by these techniques which some of them are embedded in medical instruments such as MRI, CT and other medical devices. Among these techniques, medical image enhancement algorithms play an essential role in removal of the noise which can be produced by medical instruments and during image transfer. It has been proved that impulse noise is a major type of noise, which is produced during medical operations, such as MRI, CT, and angiography, by their image capturing devices. An embeddable hardware module which is able to denoise medical images before and during surgical operations could be very helpful. In this paper an accurate algorithm is proposed for real-time removal of impulse noise in medical images. All image blocks are divided into three categories of edge, smooth, and disordered areas. A different reconstruction method is applied to each category of blocks for the purpose of noise removal. The proposed method is tested on MR images. Simulation results show acceptable denoising accuracy for various levels of noise. Also an FPAG implementation of our denoising algorithm shows acceptable hardware resource utilization. Hence, the algorithm is suitable for embedding in medical hardware instruments such as radiosurgery devices.

Explore related subjects

cs.AR physics.med-ph

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Zohreh HosseinKhani, Mohsen Hajabdollahi, Nader Karimi, S. M. Reza Soroushmehr, Shahram Shirani, Shadrokh Samavi, Kayvan Najarian. 2017-07-19. Real-Time Impulse Noise Removal from MR Images for Radiosurgery Applications. https://arxiv.org/abs/1707.05975

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Implementation of an Adaptive Transformer Accelerator for Accurate Outdoor Localization with Massive MIMO

We present a sparsity-aware FPGA implementation of an adaptive Transformer-based localization accelerator for 5G massive MIMO targeting sub-10\,ms real-time positioning. The architecture exploits propagation characteristics, where beam-delay channel representations exhibit sparsity, enabling a row-wise skipping mechanism that removes low-energy beam components with minimal control overhead. Transformer computations are mapped onto a heterogeneous vector processing engine with parallel processing elements and adder trees, using mixed input- and output-stationary dataflow execution for efficient matrix computation and reduced data movement. Environment-dependent processing is supported through a lightweight runtime model-switching mechanism, where temporally filtered outputs of a single-layer perceptron router enable selection between specialized models with reduced latency. Implemented on a Xilinx Zynq UltraScale+ FPGA and evaluated on real-world massive MIMO measurements, the design achieves up to 65\% row sparsity, yielding peak computational speedups of approximately 2x while limiting the average localization accuracy degradation to below 10\%, relative to the fixed-point baseline model. The accelerator attains below 1.15\,m localization accuracy across scenarios, with inference latency of 0.51-2.11\,ms and throughput of up to 1961 positions/s. These results demonstrate that propagation-aware sparsity, mixed dataflow execution, and efficient runtime model switching enable a scalable and low-latency hardware realization of adaptive Transformer-based localization for real-time 5G systems.

cs.AR↗

arXiv2026

RTLScout: Joint Agentic Code and Synthesis Optimization for Efficient Digital Circuits

We present RTLScout, an autonomous system that combines LLM-driven agentic design with logic synthesis optimization and arithmetic architecture selection. An LLM agent iteratively writes, evaluates, and refines RTL designs, guided by delay and area feedback from Yosys and OpenROAD. The agent writes Spire, a Python-embedded HDL we introduce, in which optimization intent is expressed locally in the source, selecting logic-synthesis or arithmetic-architecture optimizations per subcircuit. The four-phase pipeline relies entirely on open-source EDA tools and an open-weights LLM. On an IEEE-754-compliant 16-bit floating-point multiplier with subnormal support, RTLScout reduces area by 34% and delay by 38% relative to a starting design and outperforms a commercial-tool reference design on the ASAP7 technology. We show that agentic RTL rewriting and synthesis optimization are complementary, with neither alone reaching the result of the full pipeline. On 14 RTLRewriter benchmarks, the Spire-based pipeline achieves 16.3% lower mean per-case Yosys cell count than an otherwise identical Verilog pipeline.

cs.AR↗

arXiv2026

HBF Sucks? A Full-Stack Characterization of High-Bandwidth Flash for KV-Centric LLM Serving

A faster storage device should make serving faster. We find the opposite. High-Bandwidth Flash (HBF) stacks NAND behind a wide, package-local interface, promising flash-scale capacity with far lower read latency and higher bandwidth than an SSD. The obvious move is to keep an SSD-style Mooncake KV-offloading stack and swap in HBF underneath. We built that system and measured it: an extended TokenSim, four complete two-hour Qwen-Bailian production traces, five dense and mixture-of-experts models, and H100/B200 profiles. The upgrade backfires. Average end-to-end latency rises 2--5.5$\times$ and maximum SLO goodput falls 1.1--2.7$\times$ across H100 and B200, so the faster device yields a slower system. A cost-benefit model explains the paradox: a faster far tier pays off only when read I/O is the bottleneck, reads outweigh writes, and delivered bandwidth is sustainable. Transient KV violates all three at once. Buying flash through the package costs GPU near-tier capacity and bandwidth, while HBF's own read/write latency barely matters: scaling it 3.75$\times$ moves latency less than 1\%. Worse, the two-tier hierarchy keeps reuse in the near tier and hands HBF a relentless write-heavy stream. Writes outnumber reads on every trace, so a 3D-ICE model shows the stack hits its thermal limit well below peak bandwidth, and a TLC tier wears out sooner than the SSD pool it replaced. The device is fine; the drop-in deployment is not. HBF sucks as an SSD replacement for transient KV, but earns its place in LLM serving when used selectively with reuse-aware placement, write budgeting, and thermal coordination.

cs.AR↗