Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1710.01265

A D2D-based Protocol for Ultra-Reliable Wireless Communications for Industrial Automation

Liang Liu·Wei Yu
View original source ↗Read source document ↗Export metadata ↓

Abstract

As one indispensable use case for the 5G wireless systems on the roadmap, ultra-reliable and low latency communications (URLLC) is a crucial requirement for the coming era of wireless industrial automation. This paper aims to develop communication techniques for making such a paradigm shift from the conventional human-type broadband communications to the emerging machine-type URLLC. One fundamental task for URLLC is to deliver a short command from the controller to each actuator within the stringent delay requirement and also with high-reliability in the downlink. Motivated by the geographic feature in industrial automation that in the factories many tasks are assigned to different groups of devices who work in close proximity to each other and thus can form clusters of reliable device-to-device (D2D) networks, this paper proposes a novel two-phase transmission protocol for achieving the above goal. Specifically, in the first phase within the latency requirement, the multi-antenna base station (BS) combines the messages of each group together and multicasts them to the corresponding groups; while in the second phase, the devices that have decoded the messages successfully, who are defined as the leaders, help relay the messages to the other devices in their groups. Under this protocol, we further design an innovative leader selection based beamforming strategy at the BS by utilizing the sparse optimization technique, which leads to the desired sparsity pattern in user activity, i.e., at least one leader exists in each group, in the first phase, thus making full utilization of the reliable D2D networks in the second phase. Simulation results are provided to show that the proposed two-phase transmission protocol considerably improves the reliability of the whole system within the stringent latency requirement as compared to other existing schemes for URLLC such as Occupy CoW.

Explore related subjects

cs.ITcs.SYeess.SYmath.IT

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Liang Liu, Wei Yu. 2018-05-15. A D2D-based Protocol for Ultra-Reliable Wireless Communications for Industrial Automation. https://arxiv.org/abs/1710.01265

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Bistatic Target Detection by Exploiting Both Deterministic Pilots and Unknown Random Data Payloads

Integrated sensing and communication (ISAC) plays a crucial role in 6G, to enable innovative applications such as drone surveillance, urban air mobility, and low-altitude logistics. However, the hybrid ISAC signal, which comprises deterministic pilot and random data payload components, poses challenges for target detection due to two reasons: 1) these two components cause coupled shifts in both the mean and variance of the received signal, and 2) the random data payloads are typically unknown to the sensing receiver in the bistatic setting. Unfortunately, these challenges could not be tackled by existing target detection algorithms. In this paper, a generalized likelihood ratio test (GLRT)-based detector is derived, by leveraging the known deterministic pilots and the statistical characteristics of the unknown random data payloads. Due to the analytical intractability of exact performance characterization, we perform an asymptotic analysis for the false alarm probability and detection probability of the proposed detector. The results highlight a critical trade-off: both deterministic and random components improve detection reliability, but the latter also brings statistical uncertainty that hinders detection performance. Simulations validate the theoretical findings and demonstrate the effectiveness of the proposed detector, which highlights the necessity of designing a dedicated detector to fully exploited the signaling resources assigned to random data payloads.

cs.IT↗
arXiv2026

On Unbiased Parameter Estimation and Signal Reconstruction

In this paper, we extend the theory of depth-unbiased source localization to unbiased parameter estimation and signal reconstruction for an arbitrary number of non-zero parameters. The topic touches on exact reconstructibility, most commonly studied in compressed sensing and multisource estimation across various imaging problems. The theoretical results derive upper bounds on the number of recoverable parameters in the noiseless case, and define a probability measure to assess the likelihood of recovering all non-zero parameters with correct magnitude order. The work provides a mathematical explanation of the open question regarding the noise robustness of standardized and unbiased methods. The paper also reveals a trade-off between the number of sensors and the signal-to-noise ratio. Numerical experiments demonstrate the theoretical findings.

cs.IT↗
arXiv2026

Minimum enclosing Bregman balls made easy

In this work, we revisit the problem of computing minimum enclosing Bregman balls (Bregman MEBs) of finite sets of parameters. First, we show that Bregman MEBs are equivalent to MEBs of corresponding weighted point sets with respect to the power distance. We then report an efficient Frank--Wolfe $(1+ε)$-approximation algorithm for computing power MEBs, for any $ε>0$. This power MEB approximation algorithm coincides with the Bregman MEB approximation algorithm of Nock and Nielsen (2005) when expressed in the dual gradient space. Finally, we show that the Bregman potential lifting transforms used to construct Bregman Voronoi diagrams can be reinterpreted as the classical paraboloid lifting transform applied to corresponding weighted point sets. In particular, Bregman MEB circumcenters lie on the farthest Bregman Voronoi diagrams or equivalently on the corresponding farthest power diagrams.

cs.IT↗