Search arXivSearch

arXiv · 1710.05216

Gassmann Theory Applies to Nanoporous Media

Abstract

Recent progress in extraction of unconventional hydrocarbon resources has ignited the interest in the studies of nanoporous media. Since many thermodynamic and mechanical properties of nanoscale solids and fluids differ from the analogous bulk materials, it is not obvious whether wave propagation in nanoporous media can be described using the same framework as in macroporous media. Here we test the validity of Gassmann equation using two published sets of ultrasonic measurements for a model nanoporous medium, Vycor glass, saturated with two different fluids, argon and n-hexane. Predictions of the Gassmann theory depend on the bulk and shear moduli of the dry samples, which are known from ultrasonic measurements, and the bulk moduli of the solid and fluid constituents. The solid bulk modulus can be estimated from adsorption-induced deformation or from elastic effective medium theory. The fluid modulus can be calculated according to the Tait-Murnaghan equation at the solvation pressure in the pore. Substitution of these parameters into the Gassmann equation provides predictions consistent with measured data. Our findings set up a theoretical framework for investigation of fluid-saturated nanoporous media using ultrasonic elastic wave propagation.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Gennady Y. Gor, Boris Gurevich. 2018-01-04. Gassmann Theory Applies to Nanoporous Media. https://doi.org/10.1002/2017gl075321

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Three dimensional non-singular mollified elastic dislocation theory for extended width fault zones and inhomogeneous boundary element models

Classical elastic dislocation theory (CEDT) has two challenges when applied to faulting problems: 1) fictitious on-fault stresses not defined by ordinary integration and 2) the geometric unreality of infinitely thin fault zones. We show that both can be resolved by a mollified elastic dislocation theory (MEDT) built on Cortez blob (Cortez, 2001) mollified displacement discontinuity Green's functions, which represent deformation across spatially distributed fault zones of finite scale epsilon and produce singularity-free displacements and stresses everywhere. Analytical integration of the mollified source solution over arbitrary planar triangular elements is done with AI, and the resulting closed-form solutions allow for the calculation of non-singular stresses across geometrically complex fault systems. Further, we demonstrate the decoupling of the fault-zone width scale epsilon from the mesh length scale h, the elasticity analog of a result established for regularized viscous flow Stokeslets (Ferranti and Cortez, 2024). We use these mollified kernels to demonstrate numerically stable collocation boundary element models including spatially extended fault zones, material property variations and non-planar topography.

physics.geo-ph

Identifying the approach of a major earthquake

By analyzing the seismicity in natural time and studying the evolution of the fluctuations of the entropy change of seismicity under time reversal for various scales of different length i (number of events), we can identify the approach of a major earthquake (EQ) occurrence. The current investigation is extended from 1984 until now for the seismicity in Japan.

physics.geo-ph

ADEPTS: An auto-differentiable framework for time-dependent nonlinear thermo-chemical mantle convection inversion

Time-dependent mantle-dynamics inversion must address the high dimensionality of the initial state, nonlinear rheology, and gradient propagation through long-term thermo-mechanical evolution. We develop ADEPTS, a two-dimensional staggered-grid finite-difference framework for mantle-dynamics inversion based on automatic differentiation. The forward model solves incompressible Stokes flow, temperature advection-diffusion, and compositional advection with temperature- and strain-rate-dependent viscosity and plastic yielding. For the nonlinear Stokes system, we compare two gradient strategies: unrolled differentiation through a fixed number of Picard iterations and implicit differentiation of the converged discrete residual equations. Numerical experiments show that unrolled differentiation remains stable even when the nonlinear solve is not fully converged, whereas implicit differentiation requires sufficiently accurate nonlinear solutions; otherwise gradient consistency and optimization convergence deteriorate. With sufficiently converged solves, implicit differentiation recovers accurate gradients and reconstruction quality comparable to unrolled differentiation. Joint thermo-chemical twin experiments show that ADEPTS can simultaneously recover a high-dimensional initial temperature field and low-dimensional physical parameters, including compositional density, reference viscosity, and stress exponent, while fitting final-time temperature, surface horizontal velocity, and surface normal stress. These results demonstrate the feasibility of differentiable time-dependent mantle-dynamics inversion and clarify the different convergence requirements of unrolled and implicit differentiation.

physics.geo-ph