Effect of surface recombination on electroluminescence and photoconversion in a-Si:H/c-Si heterojunction solar cells

A. V. Sachenko; A. V. Bobyl; V. N. Verbitskiy; V. M. Vlasyuk; D. M. Zhigunov; V. P. Kostylyov; I. O. Sokolovskyi; E. I. Terukov; P. A. Forsh; M. Evstigneev

arXiv · 1712.06653

Effect of surface recombination on electroluminescence and photoconversion in a-Si:H/c-Si heterojunction solar cells

A. V. Sachenko·A. V. Bobyl·V. N. Verbitskiy·V. M. Vlasyuk·D. M. Zhigunov·V. P. Kostylyov·I. O. Sokolovskyi·E. I. Terukov·P. A. Forsh·M. Evstigneev

View original source ↗Read source document ↗Export metadata ↓

Abstract

Surface recombination affects both light-to-electricity and electricity-to-light conversion in solar cells (SCs). Therefore, quantitative analysis and reduction of surface recombination is an important direction in SC research. In this work, electroluminescence (EL) intensity and photoconversion efficiency of a set of 93 large-area (239\,cm$^2$) a-Si:H/c-Si heterojunction SCs (HJSCs) are measured under AM1.5 conditions at 298 K. The HJSC samples differed only in surface recombination velocity, $S$, but otherwise were identical. Variation in $S$ was due to the variation of the chemical conditions under which the samples were treated. It is established that EL quantum efficiency, is affected by $S$ much more strongly than photoconversion efficiency, $η$: namely, the reduction of the latter from 20.5\% to 18\% due to an increase of $S$ is accompanied by a decrease of the former by more than an order of magnitude. In HJSCs with well passivated surfaces, i.e. low $S$, EL efficiency reached 2.1\%, which is notably higher than the known values in silicon homojunction diodes. For temperature-dependent measurements of EL and dark I-V curves, one of the samples was cut into small-area (1 cm$^2$) pieces. It was found that EL intensity as a function of temperature develops a maximum at $T$ = 223 K. At low temperatures, the current at weak bias is shown to be due to tunneling mechanism. A theoretical model is developed that explains all these findings quantitatively.

Explore related subjects

physics.app-ph

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

A. V. Sachenko, A. V. Bobyl, V. N. Verbitskiy, V. M. Vlasyuk, D. M. Zhigunov, V. P. Kostylyov, I. O. Sokolovskyi, E. I. Terukov, P. A. Forsh, M. Evstigneev. 2017-12-18. Effect of surface recombination on electroluminescence and photoconversion in a-Si:H/c-Si heterojunction solar cells. https://arxiv.org/abs/1712.06653

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring vacancy-type defect density in monolayer semiconductors

Two-dimensional (2D) materials have attracted wide-spread interest due to their unique and tunable properties. Their optoelectronic, mechanical, and thermal properties are greatly influenced by crystal defects, which are, in turn, used to control these properties. However, experimental quantification of the density of defects, whether deliberately introduced or inherent, is very difficult in these atomically thin materials. Here we show that helium atom micro-diffraction can be used to measure the defect density in ~15x20um monolayer MoS2, a prototypical 2D semiconductor, quickly and easily compared to standard methods. We present a simple analytic model, the lattice gas equation, that captures the relationship between atomic Bragg diffraction intensity and defect density. The model, combined with ab initio scattering calculations, shows that our technique can immediately be applied to a wide range of 2D materials, independent of sample chemistry or structure. Additionally, wafer-scale characterization is immediately possible.

physics.app-ph↗

arXiv2026

Compact Modeling of Oxide-Semiconductor, 2D Material, Carbon Nanotube, and Cryogenic Transistors with Experiment Verification

This paper presents a unified compact model for emerging transistor technologies, including oxide-semiconductor field-effect transistors (OSFETs), 2D material FETs (2DFETs), carbon nanotube FETs (CNFETs), and cryogenic MOSFETs. A unified charge-density formulation is developed to account for quantum confinement, trap charges, and band-tail states in channel charge calculations. A physics-based transport model is introduced to seamlessly capture carrier transport from the long-channel diffusive regime to the short-channel ballistic limit. Scaling models are incorporated to accurately describe 2D electrostatic effects. Cryogenic operation is modeled through the inclusion of band-tail states and temperature-dependent mobility and threshold voltage. The proposed model is validated against experimental data from the fabricated OSFETs with multiple channel lengths and published measurements of 2DFETs, CNFETs, and cryogenic MOSFETs. Excellent agreement is demonstrated across diverse device architectures, operating conditions, and material systems.

physics.app-ph↗

arXiv2026

Multiplexing approaches to thermoradiative signatureless communications

Using mid-infrared emission from semiconductor devices for covert communications remains a relatively unexplored and yet promising opportunity. The phenomenon of negative luminescence allows for a method of signatureless covert communications where the net infrared emission of an emitting optoelectronic device is balanced to be identical to the ambient thermal background. In this work we provide a practical demonstration of covert data transfer over a thermoradiative channel with data rates up to 100 kbps. In addition, we demonstrate several additional multiplexing techniques that make the proposed thermoradiative communications method more secure against interception by achieving zero instantaneous optical emission, while remaining detectable if a sufficiently spatially or spectrally discerning observation is utilised. Finally, we discuss various application scenarios in which the proposed methods can be used to achieve secure signatureless communications.

physics.app-ph↗