Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1804.06816

Modeling and Characterization of Cohesion in Fine Metal Powders with a Focus on Additive Manufacturing Process Simulations

Christoph Meier·Reimar Weissbach·Johannes Weinberg·Wolfgang A. Wall·A. John Hart
View original source ↗Read source document ↗Export metadata ↓

Abstract

The cohesive interactions between fine metal powder particles crucially influence their flow behavior, which is in turn important to many powder-based manufacturing processes including emerging methods for powder-based metal additive manufacturing (AM). The present work proposes a novel modeling and characterization approach for micron-scale metal powders, with a special focus on characteristics of importance to powder-bed AM. The model is based on the discrete element method (DEM), and the considered particle-to-particle and particle-to-wall interactions involve frictional contact, rolling resistance and cohesive forces. Special emphasis lies on the modeling of cohesion. The proposed adhesion force law is defined by the pull-off force resulting from the surface energy of powder particles in combination with a van-der-Waals force curve regularization. The model is applied to predict the angle of repose (AOR) of exemplary spherical Ti-6Al-4V powders, and the surface energy value underlying the adhesion force law is calibrated by fitting the corresponding angle of repose values from numerical and experimental funnel tests. To the best of the authors' knowledge, this is the first work providing an experimental estimate for the effective surface energy of the considered class of metal powders. By this approach, an effective surface energy of $0.1mJ/m^2$ is found for the investigated Ti-6Al-4V powder. This value is considerably lower than typical experimental values for flat metal contact surfaces in the range of $30-50 mJ/m^2$, indicating the crucial influence of factors such as surface roughness and chemical surface contamination on fine metal powders. More importantly, the present study demonstrates that a neglect of the related cohesive forces leads to a drastical underestimation of the AOR and, consequently, to an insufficient representation of the bulk powder behavior.

Explore related subjects

cs.CE

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Christoph Meier, Reimar Weissbach, Johannes Weinberg, Wolfgang A. Wall, A. John Hart. 2018-05-25. Modeling and Characterization of Cohesion in Fine Metal Powders with a Focus on Additive Manufacturing Process Simulations. https://doi.org/10.1016/j.powtec.2018.11.072

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

A Compact Selective State-Space Model for Cross-Sectional Stock Return Ranking from Raw Intraday Bars

We present STRATA (Staggered-Timescale Residual Architecture), a 244,633-parameter sequence model that maps five trading days of raw five-minute bar and order-book data directly to a next-day cross-sectional return ranking, with no hand-crafted features. The raw-input setting has a structural obstacle: price series are non-stationary and differ across stocks by orders of magnitude, so a model easily latches onto price level rather than dynamics. STRATA addresses it with a stem of five branches--four learnable causal depthwise convolutions whose effective kernels are initialised to sum to zero, plus one cross-field linear contrast--followed by four selective state-space blocks whose decay biases are staggered across the stack and a four-path readout. Because a score that merely tilts toward common style factors scores well on raw rank correlations, every model's scores are residualised against eight price-volume style factors before any metric is computed. Trained on four years of data covering roughly one thousand mid-capitalisation Chinese A-shares and evaluated once on a held-out year, STRATA reaches a style-residualised rank information coefficient of 0.0728 (information ratio 1.128, signal long-short Sharpe 12.85), ahead of six parameter-matched sequence baselines on all four reported metrics; on rank IC the day-level paired gap against every baseline is significant at p < 0.001, and among the arms competitive on predictive power STRATA's scores are the least explained by the controls. The close-to-close target opens before the score exists: measured instead from the first executable price, the decile spread is indistinguishable from zero, while the ordering of the seven architectures is unchanged and STRATA's margin widens.

cs.CE↗
arXiv2026

Process-Aware Thickness Analysis in CAD Models using Hybrid Geometric Methods

Thickness is a critical geometric attribute in Design for Manufacturability (DFM), yet its computational analysis in CAD environments remains largely process-agnostic. Existing approaches rely either on inscribed-sphere or ray-casting methods, each carrying limitations that make them poorly suited as universal solutions across manufacturing processes. This paper presents a process-aware thickness analysis system for parts intended for molding and milling, where the geometric method is selected and its outputs interpreted according to the DFM rules meaningful to each process. For molding, the sphere-based method detects maximum thickness violations and wall non-uniformity, and segments parts into distinct thickness zones. For milling, ray-casting identifies regions of insufficient thickness and detects thin features prone to deflection or failure. Validation on representative parts demonstrates that this hybrid approach surfaces process-specific manufacturability issues, offering designers actionable geometric feedback early in the design cycle.

cs.CE↗
arXiv2026

Partitioned Co-Simulation for CAD-integrated Vibroacoustic Problems in Unbounded Domains

Vibroacoustic analysis often requires coupling structural and acoustic solvers based on different numerical formulations and discretizations, making monolithic implementations intrusive and limiting software modularity and reuse. This work presents a partitioned co-simulation framework for exterior vibroacoustic analysis that couples an Isogeometric boundary representation analysis (IBRA) structural solver with an isogeometric boundary element method (IGA-BEM) acoustic solver. The methodology operates directly on the computer-aided design (CAD) boundary representation, preserving the exact geometry throughout the analysis and supporting both weak and strong coupling between non-conforming discretizations. A key contribution is the extension of the Aitken dynamic relaxation and Interface Quasi-Newton with Inverse Least-Squares (IQN-ILS) convergence accelerators to complex-valued interface quantities, allowing the coupling iterations to account directly for both amplitude and phase information. The approach is validated using one-way and two-way coupled vibroacoustic benchmark problems involving thin-shell structures and exterior acoustic domains. The results show excellent agreement with monolithic reference solutions, while the proposed complex-valued convergence accelerators improve the robustness and convergence behavior of the strongly coupled solution procedure without compromising solution accuracy. These results demonstrate that the proposed approach provides an accurate, robust, and modular approach for CAD-integrated frequency-domain vibroacoustic analysis.

cs.CE↗