Search arXivSearch

arXiv · 1804.09464

Optimized Resource Provisioning and Operation Control for Low-power Wide-area IoT Networks

Abstract

The tradeoff between cost of the access network and quality of offered service to IoT devices, in terms of reliability and durability of communications, is investigated. We first develop analytical tools for reliability evaluation in uplink-oriented large-scale IoT networks. These tools comprise modeling of interference from heterogeneous interfering sources with time-frequency asynchronous radio-resource usage patterns, and benefit from realistic distribution processes for modeling channel fading and locations of interfering sources. We further present a cost model for the access network as a function of provisioned resources like density of access points (APs), and a battery lifetime model for IoT devices as a function of intrinsic parameters, e.g. level of stored energy, and network parameters, e.g. reliability of communication. The derived models represent the ways in which a required level of reliability can be achieved by either sacrificing battery lifetime (durability), e.g. increasing number of replica transmissions, or sacrificing network cost and increasing provisioned resources, e.g. density of the APs. Then, we investigate optimal resource provisioning and operation control strategies, where the former aims at finding the optimized investment in the access network based on the cost of each resource; while the latter aims at optimizing data transmission strategies of IoT devices. The simulation results confirm tightness of derived analytical expressions, and show how the derived expressions can be used in finding optimal operation points of IoT networks.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Amin Azari, Meysam Masoudi, Cicek Cavdar. 2018-04-25. Optimized Resource Provisioning and Operation Control for Low-power Wide-area IoT Networks. https://arxiv.org/abs/1804.09464

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Bistatic Target Detection by Exploiting Both Deterministic Pilots and Unknown Random Data Payloads

Integrated sensing and communication (ISAC) plays a crucial role in 6G, to enable innovative applications such as drone surveillance, urban air mobility, and low-altitude logistics. However, the hybrid ISAC signal, which comprises deterministic pilot and random data payload components, poses challenges for target detection due to two reasons: 1) these two components cause coupled shifts in both the mean and variance of the received signal, and 2) the random data payloads are typically unknown to the sensing receiver in the bistatic setting. Unfortunately, these challenges could not be tackled by existing target detection algorithms. In this paper, a generalized likelihood ratio test (GLRT)-based detector is derived, by leveraging the known deterministic pilots and the statistical characteristics of the unknown random data payloads. Due to the analytical intractability of exact performance characterization, we perform an asymptotic analysis for the false alarm probability and detection probability of the proposed detector. The results highlight a critical trade-off: both deterministic and random components improve detection reliability, but the latter also brings statistical uncertainty that hinders detection performance. Simulations validate the theoretical findings and demonstrate the effectiveness of the proposed detector, which highlights the necessity of designing a dedicated detector to fully exploited the signaling resources assigned to random data payloads.

cs.IT

On Unbiased Parameter Estimation and Signal Reconstruction

In this paper, we extend the theory of depth-unbiased source localization to unbiased parameter estimation and signal reconstruction for an arbitrary number of non-zero parameters. The topic touches on exact reconstructibility, most commonly studied in compressed sensing and multisource estimation across various imaging problems. The theoretical results derive upper bounds on the number of recoverable parameters in the noiseless case, and define a probability measure to assess the likelihood of recovering all non-zero parameters with correct magnitude order. The work provides a mathematical explanation of the open question regarding the noise robustness of standardized and unbiased methods. The paper also reveals a trade-off between the number of sensors and the signal-to-noise ratio. Numerical experiments demonstrate the theoretical findings.

cs.IT

Minimum enclosing Bregman balls made easy

In this work, we revisit the problem of computing minimum enclosing Bregman balls (Bregman MEBs) of finite sets of parameters. First, we show that Bregman MEBs are equivalent to MEBs of corresponding weighted point sets with respect to the power distance. We then report an efficient Frank--Wolfe $(1+ε)$-approximation algorithm for computing power MEBs, for any $ε>0$. This power MEB approximation algorithm coincides with the Bregman MEB approximation algorithm of Nock and Nielsen (2005) when expressed in the dual gradient space. Finally, we show that the Bregman potential lifting transforms used to construct Bregman Voronoi diagrams can be reinterpreted as the classical paraboloid lifting transform applied to corresponding weighted point sets. In particular, Bregman MEB circumcenters lie on the farthest Bregman Voronoi diagrams or equivalently on the corresponding farthest power diagrams.

cs.IT