Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1807.05622

Patient-specific and physiological load sustaining synthetic graft substitutes for fusion of critically sized segmental bone defects

Rebecca Chung·Dilhan M. Kalyon·Antonio Valdevit
View original source ↗Read source document ↗Export metadata ↓

Abstract

Critically sized defects are currently treated via autologous or allograft bone grafting, distraction osteogenesis, and membrane induction. However, these methods have major weaknesses which encourage the development of synthetic bone graft substitutes. A bioresorbable and physiologically load sustaining graft substitute was fabricated from polylactic acid using 3D printing, a versatile method which enables parameters to be customizable in a patient-specific manner. The internal architecture consists of vertical and horizontal conduits that are organized to achieve gradients in porosity and pore size in the radial direction to emulate cortical bone encapsulating cancellous bone. A diameter of 30mm and height of 10mm was designed to target the repair of critically sized long bone defects. The compressive properties of these graft substitutes were determined to be comparable to adult human femurs. Furthermore, dynamic fatigue testing at twice the human torso weight (800N) indicated that the bone graft substitute achieved stability as quickly as 200,000 cycles, suggesting its ability to support weight bearing loads while it gradually degrades as bone cells proliferate and mineralize. Additionally, the graft substitutes were seeded with human fetal osteoblasts to validate homogenous cellular attachment and cytocompatibility. Graft substitutes were also dynamically cultured for 28 days under various loading regimens using human mesenchymal stem cell differentiated osteoblasts, and these resulting tissue constructs were subjected to fatigue testing. The frequency of loading during dynamic culturing had a profound effect on the rate of mineralization which was particularly high at 2Hz, confirmed by Alizarin Red staining of the calcium deposits. Taken together, these bone graft substitutes have potential for use as orthopaedic implants to facilitate the repair of critically sized bone defects.

Explore related subjects

q-bio.TO

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Rebecca Chung, Dilhan M. Kalyon, Antonio Valdevit. 2018-07-15. Patient-specific and physiological load sustaining synthetic graft substitutes for fusion of critically sized segmental bone defects. https://arxiv.org/abs/1807.05622

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Integrated Open-Source Framework for Simulation of Transcatheter Pulmonary Valves in Native Right Ventricular Outflow Tracts

Pulmonary insufficiency is a consequence of transannular patch repair in Tetralogy of Fallot (ToF), leading to late morbidity and mortality. Transcatheter native outflow tract pulmonary valve replacement (TPVR) has become common, but assessment of patient candidacy and selection of the optimal device remains challenging. We demonstrate an integrated open-source workflow for simulation of TPVR in image-derived models to inform device selection. Machine learning-based segmentation of Computer Tomography (CT) scans was implemented to define the right ventricular outflow tract (RVOT). A custom workflow for device positioning and pre-compression was implemented in SlicerHeart. Resulting geometries were exported to FEBio for simulation. Visualization of results and quantification were performed using custom metrics implemented in SlicerHeart and FEBio. RVOT model creation and device placement could be completed in under 1 minute. Virtual device placement using FE simulations visually mimicked actual device placement and allowed quantification of vessel strain, stress, and contact area. Regions of higher strain and stress were observed at the proximal and distal end locations of the TPVs where the devices impinge on the RVOT wall. No other consistent trends were observed across simulations. The observed variability in mechanical metrics across RVOTS, stents, and locations in the RVOT highlights that no single device performs optimally in all anatomies, thereby reinforcing the need for simulation-based patient-specific assessment. This study demonstrates the feasibility of a novel open-source workflow for the rapid simulation of TPVR, which, with further refinement, may inform assessment of patient candidacy and optimal device selection.

q-bio.TO↗
arXiv2026

Modeling the Microenvironmental Dynamics of Adenoid Cystic Carcinoma in Lacrimal Gland with Treatment Intervention

Adenoid cystic carcinoma (ACC) of the lacrimal gland is a rare and extremely life threatening malignant tumor with a high risk of recurrence and poor long-term outcomes. On the other hand, due to its complex molecular dynamics and low incidence rate, treatment strategies are very limited. In this study, a mathematical model is developed based on the biological phenomena of the tumor microenvironment using nonlinear ordinary differential equations. It is analyzed both analytically and numerically. According to the findings, the growth of tumor cells is associated with the depletion of oxygen and nutrients, while severe hypoxia promotes the development of abnormal blood vessels and makes tumor control more difficult. Surgery and postoperative radiotherapy have been considered as treatment strategies, and we have observed that surgery alone may not be sufficient to prevent the regrowth of residual tumor cells. In addition, postoperative radiotherapy provides better control of the residual tumor burden, particularly when the remaining tumor cells have higher radiosensitivity. Furthermore, different radiotherapy interruption scenarios have been investigated, and the results indicate that longer gaps between radiotherapy doses can adversely affect the overall treatment response, leading to increased overall toxicity and a higher number of residual tumor cells at the end of the observation period. Consequently, our results suggest that postoperative radiotherapy after surgery, combined with adequate radiosensitivity of the residual tumor cells and adherence to the prescribed treatment schedule without prolonged interruptions, may reduce the risk of tumor recurrence and potentially improve long term survival.

q-bio.TO↗
arXiv2026

An Octahedral Fibrous Constitutive Model for Heart Valve Mechanics and Function

Fibrous soft tissues derive their nonlinear mechanical response from networks of extracellular matrix fibers. The organization of fibers and their load-bearing characteristics give rise to strain stiffening, the reverse Poynting effect, and anisotropic mechanical behavior. Motivated by these coupled features, we develop an anisotropic hyperelastic model for fibrous biological tissues that accounts for the contribution of the fiber network under both tensile and compressive deformation. The model uses an octahedral arrangement of fibers embedded in a ground matrix, allowing anisotropy, volume fraction, and pre-stretch to influence the material response. We calibrate the model to experimental data for mitral valve leaflets using an inverse finite element approach that is coupled to automatic differentiation to facilitate efficient parameter calibration. The calibrated model reproduces responses across biaxial, pure-shear, and constrained-uniaxial tests, while separate numerical tests demonstrate its ability to represent substantial volume reduction and the reverse Poynting effect. Using the calibrated model, we investigate how anisotropy and fiber reorientation affect valve deformation under physiological loading. The results show that greater leaflet compliance in the radial direction yields proper valve closure, whereas localized fiber reorientation leads to stress concentrations that may promote progressive functional degradation. Widespread reversal of the preferred material directions, by contrast, prevents closure in the simulated valve. Finally, we examine how fiber pre-stretch and collagen volume fraction affect leaflet strain and contact, finding a stronger response to changes in pre-stretch over the parameter ranges studied.

q-bio.TO↗