Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1808.01088

Post-correlation beamformer for time-domain studies of pulsars and transients

Jayanta Roy·Jayaram N. Chengalur·Ue-Li Pen
View original source ↗Read source document ↗Export metadata ↓

Abstract

We present a detailed analysis of post-correlation beamforming (i.e. beamforming which involves only phased sums of the correlation of the voltages of different antennas in an array), and compare it with the traditionally used incoherent and phased beamforming techniques. Using data from the GMRT we show that post-correlation beamformation results in a many-folds increase in the signal-to-noise for periodic signals from pulsars and several order of magnitude reduction in the number of false triggers from single pulse events like fast radio bursts (FRBs). This difference arises primarily because the post-correlation beam contains less red-noise, as well as less radio frequency interference. The post-correlation beam can also be more easily calibrated than the incoherent or phased array beams. We also discuss two different modes of post-correlation beamformation, viz. (1) by subtracting the incoherent beam from the coherent beam and (2) by phased addition of the visibilities. The computational costs for both these beamformation techniques as well as their suitability for studies of pulsars and FRBs are discussed. Techniques discussed here would be of interest for all upcoming surveys with interferometric arrays. Finally, we describe a time-domain survey with the GMRT using the post-correlation beamformation as a case study. We find that post-correlation beamforming will improve the current GMRT time-domain survey sensitivity by ~ 2 times for pulsars with periods of few 100s of millisecond and by many-folds for even slower pulsars, making it one of the most sensitive surveys for pulsars and FRBs at low and mid radio frequencies.

Explore related subjects

astro-ph.IMastro-ph.HE

Keep this discovery

BibTeXRIS

Jayanta Roy, Jayaram N. Chengalur, Ue-Li Pen. 2018-08-03. Post-correlation beamformer for time-domain studies of pulsars and transients. https://doi.org/10.3847/1538-4357/aad815

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗
arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗
arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗