Search arXivSearch

arXiv · 1811.04546

Miniaturized high-frequency sine wave gating InGaAs/InP single-photon detector

Abstract

High-frequency gating InGaAs/InP single-photon detectors (SPDs) are widely used for applications requiring single-photon detection in the near-infrared region such as quantum key distribution. Reducing SPD size is highly desired for practical use, which is favorable to the implementation of further system integration. Here we present, to the best of our knowledge, the most compact high-frequency sine wave gating (SWG) InGaAs/InP SPD. We design and fabricate an InGaAs/InP single-photon avalanche diode (SPAD) with optimized semiconductor structure, and then encapsulate the SPAD chip and a mini-thermoelectric cooler inside a butterfly package with a size of 12.5 mm $\times$ 22 mm $\times$ 10 mm. Moreover, we implement a monolithic readout circuit for the SWG SPD in order to replace the quenching electronics that is previously designed with board-level integration. Finally, the components of SPAD, monolithic readout circuit and the affiliated circuits are integrated into a single module with a size of 13 cm $\times$ 8 cm $\times$ 4 cm. Compared with the 1.25 GHz SWG InGaAs/InP SPD module (25 cm $\times$ 10 cm $\times$ 33 cm) designed in 2012, the volume of our miniaturized SPD is reduced by 95\%. After the characterization, the SPD exhibits excellent performance with a photon detection efficiency of 30\%, a dark count rate of 2.0 kcps and an afterpulse probability of 8.8\% under the conditions of 1.25 GHz gating rate, 100 ns hold-off time and 243 K. Also, we perform the stability test over one week, and the results show the high reliability of the miniaturized SPD module.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Wen-Hao Jiang, Xin-Jiang Gao, Yu-Qiang Fang, Jian-Hong Liu, Yong Zhou, Li-Qun Jiang, Wei Chen, Ge Jin, Jun Zhang, Jian-Wei Pan. 2018-11-12. Miniaturized high-frequency sine wave gating InGaAs/InP single-photon detector. https://doi.org/10.1063/1.5055376

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det