Controllable SH wave radiation patterns generated by finite-size face-shear piezoelectric transducers for structural health monitoring

Hongchen Miao; Lei Xu; Hao Zhang; Guozheng Kang

Home/Archive/arXiv

arXiv · 1811.06812

Controllable SH wave radiation patterns generated by finite-size face-shear piezoelectric transducers for structural health monitoring

Hongchen Miao·Lei Xu·Hao Zhang·Guozheng Kang

View original source ↗Read source document ↗Export metadata ↓

Abstract

The fundamental shear horizontal (SH0) wave in plate-like structures is of practical importance in structural health monitoring due to its non-dispersive characteristics. However, compared with Lamb wave, SH0 wave is less used in practice since it is difficult to be excited by using conventional piezoelectric transducers. Recently, face-shear piezoelectric mode has been realized in PZT ceramics and several face-shear piezoelectric transducers have been developed to excite pure SH0 wave in plates. However, when controllable radiation pattern of SH0 wave is required, it is found that no mathematical basis is available for designers to optimize the transducer's parameters. In this work, based on the reciprocal theorem of elastodynamics and Huygens' principle, a theoretical model is proposed to describe the SH0 wave field generated by arbitrary-shaped face-shear transducers bonded on an infinite isotropic plate. It is proved that the wave field generated by a face-shear transducer is equivalent to that generated by uniform in-plane tractions along its perimeter. Then the proposed model is applied to two specific cases of a single square face-shear (d24) PZT wafer and a bidirectional SH0 wave piezoelectric transducer(BSH-PT).Explicit analytical expressions for both cases are successfully obtained. The accuracy of the obtained analytical model is verified by both experiments and FEM simulations. Furthermore, some general guidelines based on the analytical model are presented for optimization of the transducer's dimensions. Finally, based on the guidelines, a new bidirectional SH0 wave piezoelectric transducer is proposed with very small beam divergence.

Explore related subjects

physics.app-ph

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Hongchen Miao, Lei Xu, Hao Zhang, Guozheng Kang. 2019-02-12. Controllable SH wave radiation patterns generated by finite-size face-shear piezoelectric transducers for structural health monitoring. https://arxiv.org/abs/1811.06812

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring vacancy-type defect density in monolayer semiconductors

Two-dimensional (2D) materials have attracted wide-spread interest due to their unique and tunable properties. Their optoelectronic, mechanical, and thermal properties are greatly influenced by crystal defects, which are, in turn, used to control these properties. However, experimental quantification of the density of defects, whether deliberately introduced or inherent, is very difficult in these atomically thin materials. Here we show that helium atom micro-diffraction can be used to measure the defect density in ~15x20um monolayer MoS2, a prototypical 2D semiconductor, quickly and easily compared to standard methods. We present a simple analytic model, the lattice gas equation, that captures the relationship between atomic Bragg diffraction intensity and defect density. The model, combined with ab initio scattering calculations, shows that our technique can immediately be applied to a wide range of 2D materials, independent of sample chemistry or structure. Additionally, wafer-scale characterization is immediately possible.

physics.app-ph↗

arXiv2026

Compact Modeling of Oxide-Semiconductor, 2D Material, Carbon Nanotube, and Cryogenic Transistors with Experiment Verification

This paper presents a unified compact model for emerging transistor technologies, including oxide-semiconductor field-effect transistors (OSFETs), 2D material FETs (2DFETs), carbon nanotube FETs (CNFETs), and cryogenic MOSFETs. A unified charge-density formulation is developed to account for quantum confinement, trap charges, and band-tail states in channel charge calculations. A physics-based transport model is introduced to seamlessly capture carrier transport from the long-channel diffusive regime to the short-channel ballistic limit. Scaling models are incorporated to accurately describe 2D electrostatic effects. Cryogenic operation is modeled through the inclusion of band-tail states and temperature-dependent mobility and threshold voltage. The proposed model is validated against experimental data from the fabricated OSFETs with multiple channel lengths and published measurements of 2DFETs, CNFETs, and cryogenic MOSFETs. Excellent agreement is demonstrated across diverse device architectures, operating conditions, and material systems.

physics.app-ph↗

arXiv2026

Multiplexing approaches to thermoradiative signatureless communications

Using mid-infrared emission from semiconductor devices for covert communications remains a relatively unexplored and yet promising opportunity. The phenomenon of negative luminescence allows for a method of signatureless covert communications where the net infrared emission of an emitting optoelectronic device is balanced to be identical to the ambient thermal background. In this work we provide a practical demonstration of covert data transfer over a thermoradiative channel with data rates up to 100 kbps. In addition, we demonstrate several additional multiplexing techniques that make the proposed thermoradiative communications method more secure against interception by achieving zero instantaneous optical emission, while remaining detectable if a sufficiently spatially or spectrally discerning observation is utilised. Finally, we discuss various application scenarios in which the proposed methods can be used to achieve secure signatureless communications.

physics.app-ph↗