Search arXivSearch

arXiv · 1811.09181

Pilot-Aided Joint-Channel Carrier-Phase Estimation in Space-Division Multiplexed Multicore Fiber Transmission

Abstract

The performance of pilot-aided joint-channel carrier-phase estimation (CPE) in space-division multiplexed multicore fiber (MCF) transmission with correlated phase noise is studied. To that end, a system model describing uncoded MCF transmission where the phase noise comprises a common laser phase noise, in addition to core- and polarization-specific phase drifts, is introduced. It is then shown that the system model can be regarded as a special case of a multidimensional random-walk phase-noise model. A pilot-aided CPE algorithm developed for this model is used to evaluate two strategies, namely joint-channel and per-channel CPE. To quantify the performance differences between the two strategies, their respective phase-noise tolerances are assessed through Monte Carlo simulations of uncoded transmission for different modulation formats, pilot overheads, laser linewidths, numbers of spatial channels, and degrees of phase-noise correlation across the channels. For 20 GBd transmission with 200 kHz combined laser linewidth and 1% pilot overhead, joint-channel CPE yields up to 3.4 dB improvement in power efficiency or 25.5% increased information rate. Moreover, through MCF transmission experiments, the system model is validated and the strategies are compared in terms of bit-error-rate performance versus transmission distance for uncoded transmission of different modulation formats. Up to 21% increase in transmission reach is observed for 1% pilot overhead through the use of joint-channel CPE.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Arni F. Alfredsson, Erik Agrell, Henk Wymeersch, Benjamin J. Puttnam, Georg Rademacher, Ruben S. Luís, Magnus Karlsson. 2019-10-13. Pilot-Aided Joint-Channel Carrier-Phase Estimation in Space-Division Multiplexed Multicore Fiber Transmission. https://doi.org/10.1109/jlt.2018.2886837

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Multi-Carrier Rydberg Atomic Quantum Receivers with Enhanced Bandwidth Feature for Communication and Sensing

Rydberg atomic quantum receivers (RAQRs) have attracted significant attention in recent years due to their ultra-high sensitivity. Although capable of precisely detecting the amplitude and phase of weak signals, conventional RAQRs face inherent limitations in accurately receiving wideband RF signals, due to the discrete nature of atomic energy levels and their intrinsic instantaneous bandwidth constraints. These limitations hinder their direct application to multi-carrier communication and sensing. To address this issue, this paper proposes a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) structure with five energy levels. We derive the amplitude and phase of the MC-RAQR and extract the baseband electrical signal for signal processing. In terms of multi-carrier communication and sensing, we analyze the channel capacity and accuracy of angle of arrival (AoA) and distance parameters, respectively. Numerical results validate our proposed model, showing that the MC-RAQR can achieve up to a bandwidth of 11.7 MHz, which is 17-fold larger than the conventional RAQRs. As a result, the channel capacity and the resolution for multi-target sensing are improved significantly. Specifically, the channel capacity of MC-RAQR is 110-fold and 2.8-fold larger than the classical RF receivers and RAQRs, respectively. For sensing performance, the RMSE of AoA estimation for MC-RAQR exhibits 7.6-fold reduction, compared with the conventional RAQRs. Furthermore, the RMSE of distance estimation is $634$-fold smaller than that of the root-CRB of classical RF receivers, showing the superior performance of the MC-RAQR. This demonstrates its compatibility with waveforms such as orthogonal frequency-division multiplexing (OFDM) and its significant advantages for multi-carrier signal reception.

eess.SP

Channel Estimation in MIMO Systems Aided by Microwave Linear Analog Computers (MiLACs)

Microwave linear analog computers (MiLACs) have recently emerged as a promising solution for future gigantic multiple-input multiple-output (MIMO) systems, enabling beamforming with greatly reduced hardware and computational cost. However, channel estimation for MiLAC-aided systems remains an open problem. Conventional least squares (LS) and minimum mean square error (MMSE) estimation rely on intensive digital computation, which undermines the computational advantage offered by MiLACs. In this letter, we propose efficient LS and MMSE channel estimation schemes for MiLAC-aided MIMO systems. By designing the training precoder and combiner implemented by lossless and reciprocal MiLACs, the proposed schemes perform LS and MMSE estimation in the analog domain, leaving only simple digital scaling. They achieve identical estimation performance to their digital counterparts while significantly reducing computational complexity. Numerical results verify the effectiveness of the proposed schemes.

eess.SP

Joint Subcarrier Phase Recovery for Nonlinearity Mitigation

We propose a low-complexity phase recovery scheme that simultaneously mitigates laser phase noise and fiber nonlinearity across several subcarriers. In a long single-span link with Raman amplification, the scheme achieves 0.9 dB gain with 99 real multiplications per complex symbol.

eess.SP