Search arXivSearch

arXiv · 1812.11063

Damping of acoustic waves in straight ducts and turbulent flow conditions

Abstract

In this paper the propagation of acoustic plane waves in turbulent, fully developed flow is studied by means of an experimental investigation carried out in a straight, smooth-walled duct.The presence of a coherent perturbation, such as an acoustic wave in a turbulent confined flow, generates the oscillation of the wall shear stress. In this circumstance a shear wave is excited and superimposed on the sound wave. The turbulent shear stress is modulated by the shear wave and the wall shear stress is strongly affected by the turbulence. From the experimental point of view, it results in a measured damping strictly connected to the ratio between the thickness of the acoustic sublayer, which is frequency dependent, and the thickness of the viscous sublayer of the turbulent mean flow, the last one being dependent on the Mach number. By reducing the turbulence, the viscous sublayer thickness increases and the wave propagation is mainly dominated by convective effects. In the present work, the damping and wall impedance have been extracted from the measured complex wavenumber, which represents the most important parameter used to characterize the wave propagation. An experimental approach, referred to as iterative plane wave decomposition, has been used in order to obtain the results. The investigations have been carried out at low Mach number turbulent flows, low Helmholtz numbers and low shear wavenumbers. The aim is to overcome a certain lack of experimental results found by the authors of the most recent models for the plane wave propagation in turbulent flows, such as Knutsson et al. (The effect of turbulence damping on acoustic wave propagation in tubes, Journal of Sound and Vibration, Vol. 329, No. 22, 2010), and Weng et al. (The attenuation of sound by turbulence in internal flows, The Journal of the Acoustical Society of America 133(6), 2013).

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

H. Tiikoja, F. Auriemma, J. Lavrentjev. 2018-12-22. Damping of acoustic waves in straight ducts and turbulent flow conditions. https://doi.org/10.4271/2016-01-1816

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Cross-helicity and chaotic dynamics of full-disc solar magnetic field

Using the results of laboratory experiments and direct numerical simulations, as well as observations of the full-disc solar magnetic field and sunspot number dynamics, it is demonstrated that cross-helicity can dominate the decaying part of the frequency power spectra of the magnetic field generated by a magnetohydrodynamic (MHD) dynamo in chaotic/turbulent swirling flows for sufficiently strong MHD turbulence (including the solar dynamo). The theoretical consideration is based on a Kolmogorov-like phenomenology within the framework of the distributed chaos concept. It is also shown that the solar full-disc magnetic field for the last two solar cycles with weak magnetic activity exhibits deterministic chaotic behavior concentrated around the equator.

physics.flu-dyn

Manifestation of spurious currents and interface regularization in wind turbulence over fast-propagating waves

Accurate simulation of wind turbulence over fast-propagating waves requires interface-capturing methods that suppress numerical artifacts while accurately resolving momentum transfer across the interface. In high wave-age regimes, numerical errors at the air-water interface can reach magnitudes comparable to the physical flow, directly affecting predicted turbulence statistics. This study examines widely used interface-capturing techniques to evaluate how curvature estimation and flux discretization influence wind-wave simulations through the resulting spurious currents and interface regularization. A systematic assessment is performed using static and translating droplet benchmarks, together with solitary and monochromatic wave cases, to identify and quantify the dominant numerical error mechanisms. In addition, comparison with experimental measurements reveals how these primary error sources manifest in coupled wind-wave simulations. These findings clarify the numerical origin of the observed discrepancies and underscore the importance of accurate curvature and flux treatment in high wave-age regimes, without which numerical artifacts risk being misattributed to genuine wind-wave physics.

physics.flu-dyn

A reconfigurable multi-axis cyber-physical framework for multi-regime fluid--structure interaction experiments

Fluid--structure interaction (FSI) experiments are typically built around mechanical dynamics and constraints imposed by the physical apparatus, so changing mass, stiffness, damping, or allowable motion often requires hardware reconfiguration. Here we present a reconfigurable cyber-physical framework in which these properties are instead assigned through software-defined dynamics. The system provides three translational and one rotational degree of freedom, each independently configurable as prescribed, load-responsive, or locked, with operating roles that can also be reassigned during a running experiment. Measured forces and torques are incorporated into real-time virtual dynamic models, while a common supervisory architecture coordinates multi-axis motion, mode switching, synchronized data acquisition, and diagnostic positioning. The prescribed-motion pathway is validated using a pitching hydrofoil by comparison with published thrust and power scaling trends, while the load-responsive pathway is evaluated using an active-heave/passive-pitch benchmark that reproduces the expected frequency-dependent resonant response over the tested conditions. The same platform is then reconfigured for intra-cycle active--passive pitching, coordinated vertical-axis turbine-surrogate motion, force-driven passive surge, and automated multilayer stereoscopic particle image velocimetry. These results demonstrate that distinct FSI boundary conditions and measurement requirements can be implemented within a common motion, sensing, and control architecture. By treating mechanical roles and constraints as software-defined experimental variables, the framework provides a reusable basis for reconfigurable FSI experiments without redesigning the underlying platform for each application.

physics.flu-dyn