Search arXivSearch

arXiv · 1901.07057

A New Design Framework on Device-to-Device Coded Caching with Optimal Rate and Significantly Less Subpacketizations

Abstract

In this paper, we propose a new design framework on Device-to-Device (D2D) coded caching networks with optimal rate but significantly less file subpacketizations compared to that of the well-known D2D coded caching scheme proposed by Ji, Caire and Molisch (JCM). The proposed design framework is referred to as the {\em Packet Type-based (PTB) design}, where D2D users are first partitioned into multiple groups, which leads to a so-called {\em raw packet saving gain}. Then the corresponding multicasting group types and packet types are specified based on the prescribed node partition. By a careful selection of transmitters within each multicasting group, a so-called {\em further splitting ratio gain} can also be achieved. By the joint effect of the {\em raw packet saving gain} and the {\em further splitting ratio gain}, an order-wise subpacketization reduction can be achieved compared to the JCM scheme while preserving the optimal rate for large system parameter regimes. In addition, as the first time presented in the literature according to our knowledge, we find that unequal subpacketizaton is a key to achieve a subpacketization gain when the number of users is odd. As a by-product, instead of directly translating shared link caching schemes to D2D caching schemes, at least for the sake of subpackeitzations, a new design framework is indeed needed.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Xiang Zhang, Mingyue Ji. 2020-04-14. A New Design Framework on Device-to-Device Coded Caching with Optimal Rate and Significantly Less Subpacketizations. https://arxiv.org/abs/1901.07057

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Bistatic Target Detection by Exploiting Both Deterministic Pilots and Unknown Random Data Payloads

Integrated sensing and communication (ISAC) plays a crucial role in 6G, to enable innovative applications such as drone surveillance, urban air mobility, and low-altitude logistics. However, the hybrid ISAC signal, which comprises deterministic pilot and random data payload components, poses challenges for target detection due to two reasons: 1) these two components cause coupled shifts in both the mean and variance of the received signal, and 2) the random data payloads are typically unknown to the sensing receiver in the bistatic setting. Unfortunately, these challenges could not be tackled by existing target detection algorithms. In this paper, a generalized likelihood ratio test (GLRT)-based detector is derived, by leveraging the known deterministic pilots and the statistical characteristics of the unknown random data payloads. Due to the analytical intractability of exact performance characterization, we perform an asymptotic analysis for the false alarm probability and detection probability of the proposed detector. The results highlight a critical trade-off: both deterministic and random components improve detection reliability, but the latter also brings statistical uncertainty that hinders detection performance. Simulations validate the theoretical findings and demonstrate the effectiveness of the proposed detector, which highlights the necessity of designing a dedicated detector to fully exploited the signaling resources assigned to random data payloads.

cs.IT

On Unbiased Parameter Estimation and Signal Reconstruction

In this paper, we extend the theory of depth-unbiased source localization to unbiased parameter estimation and signal reconstruction for an arbitrary number of non-zero parameters. The topic touches on exact reconstructibility, most commonly studied in compressed sensing and multisource estimation across various imaging problems. The theoretical results derive upper bounds on the number of recoverable parameters in the noiseless case, and define a probability measure to assess the likelihood of recovering all non-zero parameters with correct magnitude order. The work provides a mathematical explanation of the open question regarding the noise robustness of standardized and unbiased methods. The paper also reveals a trade-off between the number of sensors and the signal-to-noise ratio. Numerical experiments demonstrate the theoretical findings.

cs.IT

Minimum enclosing Bregman balls made easy

In this work, we revisit the problem of computing minimum enclosing Bregman balls (Bregman MEBs) of finite sets of parameters. First, we show that Bregman MEBs are equivalent to MEBs of corresponding weighted point sets with respect to the power distance. We then report an efficient Frank--Wolfe $(1+ε)$-approximation algorithm for computing power MEBs, for any $ε>0$. This power MEB approximation algorithm coincides with the Bregman MEB approximation algorithm of Nock and Nielsen (2005) when expressed in the dual gradient space. Finally, we show that the Bregman potential lifting transforms used to construct Bregman Voronoi diagrams can be reinterpreted as the classical paraboloid lifting transform applied to corresponding weighted point sets. In particular, Bregman MEB circumcenters lie on the farthest Bregman Voronoi diagrams or equivalently on the corresponding farthest power diagrams.

cs.IT