Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1902.00484

Hybrid Cell Assignment and Sizing for Power, Area, Delay Product Optimization of SRAM Arrays

Ghasem Pasandi·Raghav Mehta·Massoud Pedram·Shahin Nazarian
View original source ↗Read source document ↗Export metadata ↓

Abstract

Memory accounts for a considerable portion of the total power budget and area of digital systems. Furthermore, it is typically the performance bottleneck of the processing units. Therefore, it is critical to optimize the memory with respect to the product of power, area, and delay (PAD). We propose a hybrid cell assignment method based on multi-sized and dual-Vth SRAM cells which improves the PAD cost function by 34% compared to the conventional cell assignment. We also utilize the sizing of SRAM cells for minimizing the Data Retention Voltage (DRV), and voltages for the read and write operations in the SRAM array. Experimental results in a 32nm technology show that combining the proposed hybrid cell assignment and the cell sizing methods can lower PAD by up to 41% when compared to the conventional cell design and assignment.

Explore related subjects

cs.AR

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Ghasem Pasandi, Raghav Mehta, Massoud Pedram, Shahin Nazarian. 2019-02-01. Hybrid Cell Assignment and Sizing for Power, Area, Delay Product Optimization of SRAM Arrays. https://arxiv.org/abs/1902.00484

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Implementation and Evaluation of NTT Arithmetic for ML-KEM on a CGLA

FIPS 203 standardizes ML-KEM for post-quantum key establishment. Its polynomial multiplication relies on NTT butterflies with exact modular arithmetic over q = 3329. Dedicated NTT accelerators minimize latency with fixed modular arithmetic and stage schedules. A CPU-Grounded Linear Array (CGLA) reuses one programmable linear datapath across several workloads. Mapping the transform to this datapath requires exact FP32 reconstruction and explicit stage transitions across the ARM-to-CGLA interface. We implement an eight-stage cyclic radix-2 driver over the ML-KEM modulus by splitting each twiddle into 8-bit and 4-bit parts before modular reduction. This driver differs from the standardized seven-layer incomplete negacyclic NTT and does not implement the full ML-KEM polynomial multiplication path. The arithmetic sequence keeps every integer below 2^24. One 41-PE call fuses the first two radix-2 stages, and six 47-PE calls execute the remaining stages while scattering outputs into next-stage records. Across four cohorts, 105 FPGA runs match all 817152 output coefficients. At batch size 64, measured FPGA end-to-end latency is 27.5 us per NTT, and the ASIC projection is 6.74 us. With PE gating, projected ASIC system energy is 10.1 uJ per NTT at batch size 8 and 58.9 uJ at batch size 64.

cs.AR↗
arXiv2026

HBF-Sim: An Extensible HBF Simulator for Large-scale GPU Memory Systems

High-bandwidth flash (HBF) is introduced to address the memory wall, which can co-package a dense NAND stack with the GPU, targeting the performance gap between near-accelerator bandwidth and flash density. HBF, however, is neither a large HBM nor a fast NVMe SSD. Its usable bandwidth depends on how GPU cache-line requests map onto NAND pages, how concurrency spreads across channel-affine die sets, and how media management interacts with the GPU memory pipeline. To our knowledge, existing GPU, SSD, or HBF simulators cannot faithfully model this behavior. We present HBF-Sim, an extensible, reusable, and faithful HBF simulator integrated with simulated GPUs. It closes the loop between GPU issue limits, device queuing, and NAND behavior in one end-to-end request path. HBF-Sim separates a GPU-HBF interaction controller from page-based parallel stack storage, and it models the full GPU-HBF request path. It provides an MSHR-based address mapping table that merges cache-line requests into page-based operations, as well as a page-based multi-stack flash manager for highly parallel reads and writes. Validation tests and device-level microbenchmarks expose performance bottlenecks caused by limited channel distribution and resource conflicts, offering concrete guidance for next-generation HBF architectures.

cs.AR↗
arXiv2026

Exploiting Decompression Latency for Covert Channels in Inter-Line-Compressed LLCs

The recently proposed XOR cache is an inter-line-compressed last-level cache (LLC) that leverages the data-inclusion relationship between the private caches and the LLC, compressing two cache lines into one by XORing them. The architecture relies on the cache coherence protocol for data decompression. In this paper, we demonstrate that this mechanism - specifically the latency asymmetry between a cache hit on an uncompressed vs. compressed line - introduces microarchitectural vulnerabilities. Based on this observation, we propose a covert channel attack targeting the XOR cache. A colluding sender controls the receiver's access latency by triggering decompression through targeted write requests to partner cache lines. By exploiting the data-dependent compression behavior of the XOR cache, the sender and receiver establish the channel using pre-agreed data values. The channel achieves higher bandwidth than the Prime+Probe baseline for two reasons: first, each bit is encoded in the compression state of an individual line rather than the occupancy of a cache set, so a single set carries multiple bits; second, each bit is resolved by manipulating coherence-protocol state rather than forcing shared-cache evictions, so it costs fewer LLC accesses and demand misses than Prime+Probe. Full-system simulations show a bandwidth of 2.9 Mbps at an observed 0.98% bit-error rate (BER) over 50,000 transmitted bits, 13.1 times the bandwidth of Prime+Probe under the same sub-1%-BER selection rule.

cs.AR↗