Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1902.03877

On the optimum operating conditions of ThNe calibration lamps for measurements of radial velocity variations

M. Ammer-von Eiff·E. W. Guenther
View original source ↗Read source document ↗Export metadata ↓

Abstract

Previous studies have shown that ThNe lamps are very suitable for the precise measurement of wavelength variations. A critical issue for all hollow cathode lamps (HCL) is the current at which the lamp is operated - a low value has the advantage that the life time of the lamp is longer whereas the number of useful lines is lower. We investigate the number of suitable spectral lines depending on the current used and obtained spectra of a ThNe HCL coupled by a fibre to the Tautenburg Echelle spectrograph in a setting that is typical for many high-resolution spectrographs. Operating currents were chosen in the range specified by the manufacturer. We varied exposure time to identify the saturation level and effects of noise. A few thousands of Th lines were identified automatically in the wavelength range considered. We noticed a scatter of several hundred ms$^{-1}$ of Th lines when varying the settings but did not detect any systematic trends. The scatter in wavelength residuals of Th lines however indicates that a precise control of operating current can be necessary. An estimation of the calibration precision of individual lines indicates that a combination of strong Th lines allows one to reach a level of 1$\mathrm{ms}^{-1}$. Although a high operating current reduces the life-time of the lamp and accelerates its ageing it guarantees highest precision because of the numerous Th lines which become strong compared to the Ne lines. Then, noise, saturation, wavelength residuals of lines identified, and the pollution due to saturated Ne lines can be minimised by adjusting exposure time. Our results indicate that ThNe lamps can be better suited than ThAr lamps for all kinds of studies that involve the precise measurement of radial velocity variations, e.g. studies on late-type stars, brown dwarfs, objects that suffer from strong extinction, or high-redshift galaxies.

Explore related subjects

astro-ph.IM

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

M. Ammer-von Eiff, E. W. Guenther. 2019-02-11. On the optimum operating conditions of ThNe calibration lamps for measurements of radial velocity variations. https://doi.org/10.1002/asna.201713036

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Performance characterization of a new Structural and Thermal Architecture for a future spaceborne Closed-Cycle Dilution Refrigerator

A Structural and Thermal Model (STM) has been developed to support the new spaceborne Closed-Cycle Dilution Refrigerator (CCDR), which aims to provide continuous cooling at 100~mK for long-duration astrophysical missions. The STM is based on a hexapod architecture that ensures both thermal decoupling and mechanical robustness during launch. In this paper, we present the characterization of its thermal and mechanical performances. A dedicated experimental setup was used to investigate the thermal behavior of the STM across a broad temperature range. The study reveals limitations of the collar design, with incomplete power interception from thermal boundary resistances and vibration test failure traced to defective strut gluing. These results guide the next STM iteration with optimized collar and strut assembly for reliable CCDR operation in space.

astro-ph.IM↗
arXiv2026

The Simons Observatory: Development of a Pipeline to Detect Rapid Transients in Time-Ordered Data

We introduce a method for detecting astrophysical transients evolving on timescales of milliseconds to minutes using cosmic microwave background (CMB) survey telescopes. While previous transient searches in CMB data operate in map space, our pipeline directly processes the raw time-ordered data, enabling sensitivity to fast, dynamic signals. We integrate our detection approach into the Simons Observatory time-domain pipeline and assess the performance by injecting symmetric, stellar flare-like light curves into simulated observations. For events flaring with a timescale of 0.5 s, the pipeline detects $\gtrsim90$ % of events at flux densities of 800, 1150, 1650, and 4250\,mJy when measured in the 93, 145, 225, and 280 GHz bands respectively. At a fixed peak flux density, the pipeline more readily detects longer flares. The limiting flux density for 90 % completeness is four times lower for a $\ge5$ s flare than for a 0.5 s flare, while the flux density limits for $\gtrsim50$ % detection efficiency are comparable to the rms noise of the time-ordered data. We are able to determine the position of detected events in each observing band, with a positional uncertainty at the detection threshold comparable to the telescope resolution at that band. These results demonstrate the readiness of this pipeline for incorporation into upcoming Simons Observatory data analyses.

astro-ph.IM↗
arXiv2026

Thermal conductivity of various CFRPs from 100 mK to 20 K

Carbon-fiber-reinforced polymers (CFRPs) are some of the most useful materials for building spacecraft and aerospace tools. They are especially valuable for systems that work at extremely cold (cryogenic) temperatures because they are strong, lightweight, and don't transfer heat easily. In this study, researchers measured how well heat moves through several different types of carbon fiber samples, specifically T300, T700, HS40, M55J, and IMA, at different fiber layouts and densities. These measurements were taken at ultra-cold temperatures ranging from 100 mK to 20 K. The team used a newly developed analysis method to calculate the thermal conductivity for each sample. Finally, they shared how each material behaved at different temperatures and compared their findings to previous research.

astro-ph.IM↗