Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1905.06383

Secure Beamforming Design in Relay-Assisted Internet of Things

Pingmu Huang·Yunqin Hao·Tiejun Lv·Jintao Xing·Jie Yang·P. Takis Mathiopoulos
View original source ↗Read source document ↗Export metadata ↓

Abstract

A secure downlink transmission system which is exposed to multiple eavesdroppers and is appropriate for Internet of Things (IoT) applications is considered. A worst case scenario is assumed, in the sense that, in order to enhance their interception ability all eavesdroppers are located close to each other, near the controller and collude to form joint receive beamforming. For such a system, a novel cooperative non-orthogonal multiple access (NOMA) secure transmission scheme for which an IoT device with a stronger channel condition acts as an energy harvesting relay in order to assist a second IoT device operating under weaker channel conditions, is proposed and its performance is analyzed and evaluated. A secrecy sum rate (SSR) maximization problem is formulated and solved under three constraints: i) Transmit power; ii) Successive interference cancellation; iii) Quality of Service. By considering both passive and active eavesdroppers scenarios, two optimization schemes are proposed to improve the overall system SSR. On the one hand, for the passive eavesdropper scenario, an artificial noise-aided secure beamforming scheme is proposed. Since this optimization problem is nonconvex, instead of using traditional but highly complex, bruteforce two-dimensional search, it is conveniently transformed into a convex one by using an epigraph reformulation. On the other hand, for the active multi-antennas eavesdroppers' scenario, the orthogonal-projection-based beamforming scheme is considered, and by employing the successive convex approximation method, a suboptimal solution is proposed. Furthermore, since for single antenna transmission the orthogonal-projection-based scheme may not be applicable a simple power control scheme is proposed.

Explore related subjects

eess.SP

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Pingmu Huang, Yunqin Hao, Tiejun Lv, Jintao Xing, Jie Yang, P. Takis Mathiopoulos. 2019-05-05. Secure Beamforming Design in Relay-Assisted Internet of Things. https://arxiv.org/abs/1905.06383

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Multi-Carrier Rydberg Atomic Quantum Receivers with Enhanced Bandwidth Feature for Communication and Sensing

Rydberg atomic quantum receivers (RAQRs) have attracted significant attention in recent years due to their ultra-high sensitivity. Although capable of precisely detecting the amplitude and phase of weak signals, conventional RAQRs face inherent limitations in accurately receiving wideband RF signals, due to the discrete nature of atomic energy levels and their intrinsic instantaneous bandwidth constraints. These limitations hinder their direct application to multi-carrier communication and sensing. To address this issue, this paper proposes a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) structure with five energy levels. We derive the amplitude and phase of the MC-RAQR and extract the baseband electrical signal for signal processing. In terms of multi-carrier communication and sensing, we analyze the channel capacity and accuracy of angle of arrival (AoA) and distance parameters, respectively. Numerical results validate our proposed model, showing that the MC-RAQR can achieve up to a bandwidth of 11.7 MHz, which is 17-fold larger than the conventional RAQRs. As a result, the channel capacity and the resolution for multi-target sensing are improved significantly. Specifically, the channel capacity of MC-RAQR is 110-fold and 2.8-fold larger than the classical RF receivers and RAQRs, respectively. For sensing performance, the RMSE of AoA estimation for MC-RAQR exhibits 7.6-fold reduction, compared with the conventional RAQRs. Furthermore, the RMSE of distance estimation is $634$-fold smaller than that of the root-CRB of classical RF receivers, showing the superior performance of the MC-RAQR. This demonstrates its compatibility with waveforms such as orthogonal frequency-division multiplexing (OFDM) and its significant advantages for multi-carrier signal reception.

eess.SP↗
arXiv2026

Channel Estimation in MIMO Systems Aided by Microwave Linear Analog Computers (MiLACs)

Microwave linear analog computers (MiLACs) have recently emerged as a promising solution for future gigantic multiple-input multiple-output (MIMO) systems, enabling beamforming with greatly reduced hardware and computational cost. However, channel estimation for MiLAC-aided systems remains an open problem. Conventional least squares (LS) and minimum mean square error (MMSE) estimation rely on intensive digital computation, which undermines the computational advantage offered by MiLACs. In this letter, we propose efficient LS and MMSE channel estimation schemes for MiLAC-aided MIMO systems. By designing the training precoder and combiner implemented by lossless and reciprocal MiLACs, the proposed schemes perform LS and MMSE estimation in the analog domain, leaving only simple digital scaling. They achieve identical estimation performance to their digital counterparts while significantly reducing computational complexity. Numerical results verify the effectiveness of the proposed schemes.

eess.SP↗
arXiv2026

Joint Subcarrier Phase Recovery for Nonlinearity Mitigation

We propose a low-complexity phase recovery scheme that simultaneously mitigates laser phase noise and fiber nonlinearity across several subcarriers. In a long single-span link with Raman amplification, the scheme achieves 0.9 dB gain with 99 real multiplications per complex symbol.

eess.SP↗