Search arXivSearch

arXiv · 1905.08602

Time resolution and dynamic range of field effect transistor based terahertz detectors

Abstract

We studied time resolution and response power dependence of three terahertz detectors based on significantly different types of field effect transistors. We analyzed the photoresponse of custom-made Si junctionless FETs, Si MOSFETs and GaAs-based high electron mobility transistors detectors. Applying monochromatic radiation of high power, pulsed, line-tunable molecular THz laser, which operated at frequencies in the range from 0.6-3.3 THz, we demonstrated that all these detectors have at least nanosecond response time. We showed that detectors yield a linear response in a wide range of radiation power. At high powers the response saturates varying with radiation power P as $U = R_0 P/(1+P/P_s)$, where $R_0$ is the low power responsivity, $P_s$ is the saturation power. We demonstrated that the linear part response decreases with radiation frequency increase as $R_0 \propto f^{-3}$, whereas the power at which signal saturates increases as $P_s \propto f^3$. We discussed the observed dependences in the framework of the Dyakonov-Shur mechanism and detector-antenna impedance matching. Our study showed that FET transistors can be used as ultrafast room temperature detectors of THz radiation and that their dynamic range extends over many orders of magnitude of power of incoming THz radiation. Therefore, when embedded with current driven read out electronics they are very well adopted for operation with high power pulsed sources.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Przemyslaw Zagrajek, Sergey N. Danilov, Jacek Marczewski, Michal Zaborowski, Cezary Kolacinski, Dariusz Obrebski, Pawel Kopyt, Bartlomiej Salski, Dmytro But, Wojciech Knap, Sergey D. Ganichev. 2019-05-21. Time resolution and dynamic range of field effect transistor based terahertz detectors. https://doi.org/10.1007/s10762-019-00605-0

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Measuring vacancy-type defect density in monolayer semiconductors

Two-dimensional (2D) materials have attracted wide-spread interest due to their unique and tunable properties. Their optoelectronic, mechanical, and thermal properties are greatly influenced by crystal defects, which are, in turn, used to control these properties. However, experimental quantification of the density of defects, whether deliberately introduced or inherent, is very difficult in these atomically thin materials. Here we show that helium atom micro-diffraction can be used to measure the defect density in ~15x20um monolayer MoS2, a prototypical 2D semiconductor, quickly and easily compared to standard methods. We present a simple analytic model, the lattice gas equation, that captures the relationship between atomic Bragg diffraction intensity and defect density. The model, combined with ab initio scattering calculations, shows that our technique can immediately be applied to a wide range of 2D materials, independent of sample chemistry or structure. Additionally, wafer-scale characterization is immediately possible.

physics.app-ph

Compact Modeling of Oxide-Semiconductor, 2D Material, Carbon Nanotube, and Cryogenic Transistors with Experiment Verification

This paper presents a unified compact model for emerging transistor technologies, including oxide-semiconductor field-effect transistors (OSFETs), 2D material FETs (2DFETs), carbon nanotube FETs (CNFETs), and cryogenic MOSFETs. A unified charge-density formulation is developed to account for quantum confinement, trap charges, and band-tail states in channel charge calculations. A physics-based transport model is introduced to seamlessly capture carrier transport from the long-channel diffusive regime to the short-channel ballistic limit. Scaling models are incorporated to accurately describe 2D electrostatic effects. Cryogenic operation is modeled through the inclusion of band-tail states and temperature-dependent mobility and threshold voltage. The proposed model is validated against experimental data from the fabricated OSFETs with multiple channel lengths and published measurements of 2DFETs, CNFETs, and cryogenic MOSFETs. Excellent agreement is demonstrated across diverse device architectures, operating conditions, and material systems.

physics.app-ph

Multiplexing approaches to thermoradiative signatureless communications

Using mid-infrared emission from semiconductor devices for covert communications remains a relatively unexplored and yet promising opportunity. The phenomenon of negative luminescence allows for a method of signatureless covert communications where the net infrared emission of an emitting optoelectronic device is balanced to be identical to the ambient thermal background. In this work we provide a practical demonstration of covert data transfer over a thermoradiative channel with data rates up to 100 kbps. In addition, we demonstrate several additional multiplexing techniques that make the proposed thermoradiative communications method more secure against interception by achieving zero instantaneous optical emission, while remaining detectable if a sufficiently spatially or spectrally discerning observation is utilised. Finally, we discuss various application scenarios in which the proposed methods can be used to achieve secure signatureless communications.

physics.app-ph