Search arXivSearch

arXiv · 1905.11217

Simulation Environment for Link Energy Estimation in Networks-on-Chip with Virtual Channels

Abstract

Network-on-chip (NoC) is the most promising design paradigm for the interconnect architecture of a multiprocessor system-on-chip (MPSoC). On the downside, a NoC has a significant impact on the overall energy consumption of the system. NoC simulators are highly relevant for design space exploration even at an early stage. Since links in NoC consume up to 50% of the energy, a realistic energy consumption of links in NoC simulators is important. This work presents a simulation environment which implements a technique to precisely estimate the data dependent link energy consumption in NoCs with virtual channels for the first time. Our model works at a high level of abstraction, making it feasible to estimate the energy requirements at an early design stage. Additionally, it enables the fast evaluation and early exploration of low-power coding techniques. The presented model is applicable for 2D and 3D NoCs. A case study for an image processing application shows that the current link model leads to an underestimate of the link energy consumption by up to a factor of four. In contrast, the technique presented in this paper estimates the energy quantities precisely with an error below 1% compared to results obtained by precise, but computational extensive, bit-level simulation.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jan Moritz Joseph, Lennart Bamberg, Imad Hajjar, Robert Schmidt, Thilo Pionteck, Alberto Garcia-Ortiz. 2019-05-23. Simulation Environment for Link Energy Estimation in Networks-on-Chip with Virtual Channels. https://arxiv.org/abs/1905.11217

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Multi-Carrier Rydberg Atomic Quantum Receivers with Enhanced Bandwidth Feature for Communication and Sensing

Rydberg atomic quantum receivers (RAQRs) have attracted significant attention in recent years due to their ultra-high sensitivity. Although capable of precisely detecting the amplitude and phase of weak signals, conventional RAQRs face inherent limitations in accurately receiving wideband RF signals, due to the discrete nature of atomic energy levels and their intrinsic instantaneous bandwidth constraints. These limitations hinder their direct application to multi-carrier communication and sensing. To address this issue, this paper proposes a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) structure with five energy levels. We derive the amplitude and phase of the MC-RAQR and extract the baseband electrical signal for signal processing. In terms of multi-carrier communication and sensing, we analyze the channel capacity and accuracy of angle of arrival (AoA) and distance parameters, respectively. Numerical results validate our proposed model, showing that the MC-RAQR can achieve up to a bandwidth of 11.7 MHz, which is 17-fold larger than the conventional RAQRs. As a result, the channel capacity and the resolution for multi-target sensing are improved significantly. Specifically, the channel capacity of MC-RAQR is 110-fold and 2.8-fold larger than the classical RF receivers and RAQRs, respectively. For sensing performance, the RMSE of AoA estimation for MC-RAQR exhibits 7.6-fold reduction, compared with the conventional RAQRs. Furthermore, the RMSE of distance estimation is $634$-fold smaller than that of the root-CRB of classical RF receivers, showing the superior performance of the MC-RAQR. This demonstrates its compatibility with waveforms such as orthogonal frequency-division multiplexing (OFDM) and its significant advantages for multi-carrier signal reception.

eess.SP

Channel Estimation in MIMO Systems Aided by Microwave Linear Analog Computers (MiLACs)

Microwave linear analog computers (MiLACs) have recently emerged as a promising solution for future gigantic multiple-input multiple-output (MIMO) systems, enabling beamforming with greatly reduced hardware and computational cost. However, channel estimation for MiLAC-aided systems remains an open problem. Conventional least squares (LS) and minimum mean square error (MMSE) estimation rely on intensive digital computation, which undermines the computational advantage offered by MiLACs. In this letter, we propose efficient LS and MMSE channel estimation schemes for MiLAC-aided MIMO systems. By designing the training precoder and combiner implemented by lossless and reciprocal MiLACs, the proposed schemes perform LS and MMSE estimation in the analog domain, leaving only simple digital scaling. They achieve identical estimation performance to their digital counterparts while significantly reducing computational complexity. Numerical results verify the effectiveness of the proposed schemes.

eess.SP

Joint Subcarrier Phase Recovery for Nonlinearity Mitigation

We propose a low-complexity phase recovery scheme that simultaneously mitigates laser phase noise and fiber nonlinearity across several subcarriers. In a long single-span link with Raman amplification, the scheme achieves 0.9 dB gain with 99 real multiplications per complex symbol.

eess.SP