A Combined Computational and Experimental Investigation on Evaporation of a Sessile Water Droplet on a Heated Hydrophilic Substrate

Manish Kumar; Rajneesh Bhardwaj

Home/Archive/arXiv

arXiv · 1907.05486

A Combined Computational and Experimental Investigation on Evaporation of a Sessile Water Droplet on a Heated Hydrophilic Substrate

Manish Kumar·Rajneesh Bhardwaj

View original source ↗Read source document ↗Export metadata ↓

Abstract

We numerically and experimentally investigate evaporation of a sessile droplet on a heated substrate. We develop a finite element (FE) model in two-dimensional axisymmetric coordinates to solve coupled transport of heat in the droplet and substrate, and of the mass of liquid vapor in surrounding ambient while assuming diffusion-limited, quasi-steady evaporation of the droplet. The two-way coupling is implemented using an iterative scheme and under-relaxation is used to ensure numerical stability. The FE model is validated against the published spatial profile of the evaporation mass flux and temperature of the liquid-gas interface. We discuss cases in which the two-way coupling is significantly accurate than the one-way coupling. In experiments, we visualized side view of an evaporating microliter water droplet using a high-speed camera at different substrate temperatures and recorded temperature of the liquid-gas interface from the top using an infrared camera. We examine the dependency of inversion of the temperature profile across the liquid-gas interface on the ratio of the substrate thickness to the wetted radius, the ratio of the thermal conductivity of the substrate to that of the droplet and contact angle. A comparison of measured evaporation mass rate with the computed values at different substrate temperature show that the evaporation mass rate increases non-linearly with respect to the substrate temperature, and FE model predicts these values close to the experimental data. Comparisons of time-averaged evaporation mass rate obtained by the previous and present models against the measurements suggest that the evaporative cooling at the interface and variation of diffusion coefficient with temperature should be taken into account in the model in order to accurately capture the measurements.

Explore related subjects

physics.app-ph physics.class-ph physics.flu-dyn

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Manish Kumar, Rajneesh Bhardwaj. 2019-03-31. A Combined Computational and Experimental Investigation on Evaporation of a Sessile Water Droplet on a Heated Hydrophilic Substrate. https://arxiv.org/abs/1907.05486

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Janus Dipoles: Fundamentals, Realizations, and Emerging Applications

The Janus dipole - featuring orthogonally oriented electric and magnetic dipoles with a 90-degree phase difference - has emerged as a powerful paradigm for wave manipulation. Unlike traditional Huygens dipoles used for directional control, this unique configuration exhibits strongly asymmetric, face-selective near-field behavior while maintaining a quasi-isotropic far-field radiation pattern. These remarkable properties make the Janus dipole an essential platform for directional wave shaping, with wide-ranging applications in on-chip photonics, quantum interactions, and wireless power transfer. This review systematically traces the rapid development of the Janus dipole from its foundational theoretical inception to its diverse implementation platforms across optical, microwave, and acoustic frequencies. In this paper, we explore the governing principles, classify realization strategies into passive Janus dipoles, active Janus dipoles, and advanced near-field coupling control, and highlight emerging frontiers. By bridging foundational electrodynamics with advanced device engineering, this paper serves as an essential reference and roadmap for researchers designing next-generation, highly integrated, and compact wave-manipulation systems.

physics.app-ph↗

arXiv2026

Pendellösung length-scale neutron and X-ray interferometry

Neutron and X-ray perfect-crystal interferometers (PCIs) are powerful platforms for studies of fundamental physics and phase-contrast imaging. Further enhancing several PCI capabilities requires reducing crystal blade thickness to the micron scale, which minimizes dynamical-diffraction image blur, permits operation in the pendellösung regime where blade thickness controls beam splitting, and reduces absorption for simultaneous neutron and X-ray operation. However, fabricating multiple crystal blades with identical micrometer-scale thicknesses over centimeter-scale areas remains a major challenge. Here, using a non-etching sub-micron fabrication technique, we demonstrate silicon triple-Laue interferometers with equal-blade-thicknesses of 110 $μ$m and 350 $μ$m, operated with both neutrons and X-rays. These devices are the thinnest PCIs realized to date, enabling a factor-of-six reduction in dynamical-diffraction beam spreading for improved phase-contrast imaging, while reaching the single pendellösung length regime in which crystal thickness provides an experimentally accessible control parameter for engineered quantum-optical beam splitting of plane-wave inputs. These results motivate multi-blade PCI designs utilizing identical half-pendellösung crystal lamellae that are proposed for neutron spin--orbit and electric dipole moment measurements.

physics.app-ph↗

arXiv2026

A State-Space Framework for trivial and Topological Metamaterial Stochastic Analysis

Topological phononic crystals and elastic metamaterials support edge states defined by global topological invariants, offering a route toward vibration-control and wave-guiding devices that remain functional in the presence of defects. However, manufacturing-induced spatial variability can perturb these invariants and compromise their robustness, making its quantification essential during design. In this work, we first demonstrate that a previously proposed linear time-varying (LTV) formulation is mathematically equivalent to the spectral element method based on transfer matrices for elementary rod, Saint-Venant shaft, and Euler-Bernoulli beam theories. The deterministic formulation is then extended to stochastic analyses through a stochastic linear time-varying (SLTV) framework. The proposed methodology combines Monte Carlo simulations with stochastic Fourier series and an analytical Karhunen--Loève expansion, providing closed-form stochastic fields and their derivatives required by the LTV formulation. The SLTV approach enables the computation of stochastic dispersion diagrams and forced responses of one-dimensional waveguides with arbitrarily varying geometry and mechanical properties. Because the LTV-based transition matrix isolates individual wavemodes without requiring the mode tracking needed by conventional eigenproblem-based formulations, the framework is particularly suited for evaluating topological invariants, specifically the Zak phase, and assessing the robustness of topological bands under spatial variability. Numerical results for rods, shafts, and Euler-Bernoulli beams demonstrate the applicability of the proposed framework as a unified methodology for deterministic and stochastic analyses of trivial and topological periodic waveguides under continuous spatial uncertainty.

physics.app-ph↗