Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1907.05617

NanoCarb part 2: Performance assessment for total column CO2 monitoring from a nano-satellite

Silvère Gousset·Laurence Croizé·Etienne Le Coarer·Yann Ferrec·Laure Brooker
View original source ↗Read source document ↗Export metadata ↓

Abstract

NanoCarb is an innovative Fourier Transform imaging spectrometer dedicated to the measurement of CO2 and CH4. Both its unusual optical principle and sampling strategy allows to reach a compact design, ideal for small satellite constellation as investigated by the European project SCARBO. The NanoCarb performance assessment as well as a proof of concept are required in this framework. A strategy of design is developed to optimize the performances and reach the sensitivity target of the space mission, demonstrating the potential of the concept without drastic complexity gain. A preliminary bias mitigation in the retrieval strategy is presented concerning water for CO2 measurement, illustrating the efficiency and the flexibility of the NanoCarb partial interferogram sampling technic. The presented design reaches a random error sub-ppm for CO2 and sub-10ppb for CH4, considering a 128 to 192 km swath, respectively, for 2 or 3 km of resolution at ground. A full mitigation of the water bias is performed on CO2 band thanks to partial interferograms.

Explore related subjects

physics.ins-detphysics.ao-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Silvère Gousset, Laurence Croizé, Etienne Le Coarer, Yann Ferrec, Laure Brooker. 2019-07-12. NanoCarb part 2: Performance assessment for total column CO2 monitoring from a nano-satellite. https://arxiv.org/abs/1907.05617

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det↗
arXiv2026

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det↗
arXiv2026

Characterization of immersed SiPM arrays in liquid scintillator between room temperature and $-30\,^{\circ}\mathrm{C}$

Liquid scintillator detectors instrumented with distributed silicon photomultiplier (SiPM) arrays can be used in compact, topology-sensitive, and low-background experiments, but the temperature dependence of SiPMs immersed directly in the scintillation medium has not been widely characterized. We report the operation of a 125-liter linear-alkylbenzene-based liquid scintillator detector read out by 125 SiPM channels immersed in the active volume, over the range from room temperature to $-30\,^{\circ}\mathrm{C}$. The detector response was measured with cosmic-ray muons, including stopping muons followed by their Michel-electron decay. Cooling from $+15\,^{\circ}\mathrm{C}$ to $-30\,^{\circ}\mathrm{C}$ reduced the SiPM dark-count rate by a factor of 13.5, increased the single-photoelectron response by 49.1%, and increased the cosmic-ray muon light yield by 16.7%. The improved photoelectron separation and baseline stability at low temperature enabled a selection of stopping-muon events, from which the effective muon lifetime was measured to be $1959\pm132\,\mathrm{ns}$, consistent with the value expected for a hydrocarbon scintillator once $μ^{-}$ capture on carbon is taken into account.

physics.ins-det↗