Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1907.07675

Distributed vibration sensing based on forward transmission and coherent detection

Yaxi Yan·Changjian Guo·Xiong Wu·Ziqi Lin·Xian Zhou·Faisal Nadeem Khan·Alan Pak Tao Lau·Chao Lu
View original source ↗Read source document ↗Export metadata ↓

Abstract

A novel ultra-long distributed vibration sensing (DVS) system using forward transmission and coherent detection is proposed and experimentally demonstrated. In the proposed scheme, a pair of multi-span optical fibers are deployed for sensing, and a loop-back configuration is used by connecting the two fibers at the far end. The homodyne coherent detection is used to retrieve the phase and state-of-polarization (SOP) fluctuations caused by a vibration while the localization of the vibration is realized by tracking the phase changes along the two fibers. The proposed scheme has the advantage of high signal-to-noise ratio (SNR) and ultra-long sensing range due to the nature of forward transmission and coherent detection. In addition, using forward rather than backward scattering allows detection of high frequency vibration signal over a long sensing range. More than 50dB sensing SNR can be obtained after long-haul transmission. Meanwhile, localization of 400 Hz, 1 kHz and 10 kHz vibrations has been experimentally demonstrated with a spatial resolution of less than 50 m over a total of 1008 km sensing fiber. The sensing length can be further extended to even trans-oceanic distances using more fiber spans and erbium-doped fiber amplifiers (EDFAs), making it a promising candidate for proactive fault detection and localization in long-haul and ultra-long-haul fiber links.

Explore related subjects

eess.SPcs.SYeess.SY

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Yaxi Yan, Changjian Guo, Xiong Wu, Ziqi Lin, Xian Zhou, Faisal Nadeem Khan, Alan Pak Tao Lau, Chao Lu. 2019-07-17. Distributed vibration sensing based on forward transmission and coherent detection. https://arxiv.org/abs/1907.07675

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Multi-Carrier Rydberg Atomic Quantum Receivers with Enhanced Bandwidth Feature for Communication and Sensing

Rydberg atomic quantum receivers (RAQRs) have attracted significant attention in recent years due to their ultra-high sensitivity. Although capable of precisely detecting the amplitude and phase of weak signals, conventional RAQRs face inherent limitations in accurately receiving wideband RF signals, due to the discrete nature of atomic energy levels and their intrinsic instantaneous bandwidth constraints. These limitations hinder their direct application to multi-carrier communication and sensing. To address this issue, this paper proposes a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) structure with five energy levels. We derive the amplitude and phase of the MC-RAQR and extract the baseband electrical signal for signal processing. In terms of multi-carrier communication and sensing, we analyze the channel capacity and accuracy of angle of arrival (AoA) and distance parameters, respectively. Numerical results validate our proposed model, showing that the MC-RAQR can achieve up to a bandwidth of 11.7 MHz, which is 17-fold larger than the conventional RAQRs. As a result, the channel capacity and the resolution for multi-target sensing are improved significantly. Specifically, the channel capacity of MC-RAQR is 110-fold and 2.8-fold larger than the classical RF receivers and RAQRs, respectively. For sensing performance, the RMSE of AoA estimation for MC-RAQR exhibits 7.6-fold reduction, compared with the conventional RAQRs. Furthermore, the RMSE of distance estimation is $634$-fold smaller than that of the root-CRB of classical RF receivers, showing the superior performance of the MC-RAQR. This demonstrates its compatibility with waveforms such as orthogonal frequency-division multiplexing (OFDM) and its significant advantages for multi-carrier signal reception.

eess.SP↗
arXiv2026

Channel Estimation in MIMO Systems Aided by Microwave Linear Analog Computers (MiLACs)

Microwave linear analog computers (MiLACs) have recently emerged as a promising solution for future gigantic multiple-input multiple-output (MIMO) systems, enabling beamforming with greatly reduced hardware and computational cost. However, channel estimation for MiLAC-aided systems remains an open problem. Conventional least squares (LS) and minimum mean square error (MMSE) estimation rely on intensive digital computation, which undermines the computational advantage offered by MiLACs. In this letter, we propose efficient LS and MMSE channel estimation schemes for MiLAC-aided MIMO systems. By designing the training precoder and combiner implemented by lossless and reciprocal MiLACs, the proposed schemes perform LS and MMSE estimation in the analog domain, leaving only simple digital scaling. They achieve identical estimation performance to their digital counterparts while significantly reducing computational complexity. Numerical results verify the effectiveness of the proposed schemes.

eess.SP↗
arXiv2026

Joint Subcarrier Phase Recovery for Nonlinearity Mitigation

We propose a low-complexity phase recovery scheme that simultaneously mitigates laser phase noise and fiber nonlinearity across several subcarriers. In a long single-span link with Raman amplification, the scheme achieves 0.9 dB gain with 99 real multiplications per complex symbol.

eess.SP↗