Search arXivSearch

arXiv · 1907.08891

Far-Field Monitoring of Reactor Antineutrinos for Nonproliferation

Abstract

Numerous experimental efforts have shown that antineutrino-based monitoring provides a non-intrusive means to estimate the fissile content and relative thermal power of nuclear reactors for nonproliferation. Until now, there have been no experimental demonstrations dedicated to exploring the nonproliferation potential of large detectors required for long-range monitoring. The goal of the Advanced Instrumentation Testbed (AIT) program is to test novel methods for the discovery of reactor cores, specifically in the mid-field to far-field, beyond 200 meters and out to tens or hundreds of kilometers, using kiloton-scale to megaton-scale detectors. The main physical infrastructure of the AIT consists of an underground laboratory in the Boulby mine in Northern England. The site is located at a 26-km standoff from the Hartlepool Reactor Complex, which houses two 1.5-GWth advanced gas-cooled reactors. The first detector to be deployed at the AIT is the WATer CHerenkov Monitor of ANtineutrinos (WATCHMAN). WATCHMAN will use ~6,000 tons of gadolinium-doped water in order to detect a few reactor antineutrinos per week from the Hartlepool reactor complex. WATCHMAN will focus on understanding the signal efficiency, radiological backgrounds, and the reactor operational status. Here, the nonproliferation goals are to understand the sensitivity for discovery of one reactor in the presence of another, the discovery of any reactor operations above a well-understood background, and the sensitivity to confirm the declared operational cycles of both reactors. Uniquely, AIT-WATCHMAN also offers a flexible platform at which nascent technologies such as water-based scintillator and fast photomultiplier tubes can be tested in real-world conditions. We present the AIT-WATCHMAN program and status.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Viacheslav A. Li. 2019-07-21. Far-Field Monitoring of Reactor Antineutrinos for Nonproliferation. https://arxiv.org/abs/1907.08891

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Development of an Extensible Unified Control System Using the STARS Framework and Common Commands for Detector Control

A zooming optical system comprising two Fresnel zone plates (FZPs) was developed and installed at the AR-NE1A beamline of the Photon Factory, High Energy Accelerator Research Organization (KEK), Japan. To ensure reliable and versatile operation, we implemented a dedicated control architecture based on the Simple Transmission and Retrieval System (STARS) framework and the newly proposed STARS Common Commands for Detector Control (CCDC)---a data-acquisition (DAQ) state model and command set designed specifically for detector control. The system serves both as a practical control system for the zooming optics and as a demonstration of modular extensibility using STARS and detector interoperability through CCDC. The system has been commissioned, and its performance has been verified at the AR-NE1A beamline. The architecture enables flexible configuration of optical components and provides a unified interface for both routine operation and advanced experimental protocols.

physics.ins-det

Agentic TCAD Calibration Workflow for Oxide Semiconductor Transistors

Experimental TCAD calibration is essential for predictive technology modeling of emerging oxide semiconductor transistors. However, it remains time-consuming and expert dependent because of model ambiguity. Multiple physical models and parameter sets can reproduce the same measured transfer characteristics, while local fitting alone cannot uniquely identify the underlying device physics. We present the first demonstration of an agentic TCAD calibration workflow for a fabricated bottom-gate In--W--O (BG-IWO) transistor. Starting from the measured transfer curve and device information, the workflow uses measurement--TCAD residuals and local sensitivity tests to select bounded parameter corrections or evaluate additional physical models, and accept only updates that improve device metrics. The LLM agent orchestrates the workflow, while Sentaurus governs the device physics. For the 2\%-W reference device, five agent-suggested updates yield a fixed calibrated model, reducing the multi-metric device objective $J$ by 14.3$\times$. Maximum $V_{\mathrm{th}}$/$I_{\mathrm{on}}$ errors are 36.1~mV/0.022 decade for varying-drain-bias tests and 46.2~mV/0.062 decade for varying-channel-length tests, demonstrating model transferability across bias and geometry rather than a local parameter fit. W-composition tests provide process-sensitive insight. This agentic workflow provides a faster route to model development for emerging device technologies.

physics.ins-det

Birefringence of AlGaAs/GaAs Coatings under Above-Band-Gap Illumination, GR Noise and Photo-Optic Transfer Function

AlGaAs/GaAs coatings are being considered as coating candidates for gravitational-wave detectors. In this paper we investigate the birefringence properties of this crystalline semiconductor material by modulating the optical illumination on the mirror coating and monitoring the induced birefringence. While the measured low-frequency birefringence values align with previous studies, we observed a frequency-dependent behavior in the illumination-to-birefringence coupling, characterized by a pole increasing with illumination intensity and a gain at zero frequency (DC gain) decreasing with illumination intensity. We developed a generic theoretical model based on a master equation to characterize the measurement results by considering photon-induced electric fields and electro-optic effects. This model can fit the frequency and intensity dependencies of the induced birefringence. Additionally, this model predicts a generation-recombination noise (GR noise) will be observable in the coating birefringence. While the presented measurement cannot predict the exact level of GR noise, for the frequency band and spot sizes relevant for gravitational-wave detectors we expect GR noise to be white below the pole frequency, scale with power the same way laser shot noise does, and for fixed power be independent of spot size.

physics.ins-det