Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1909.08140

Simultaneous Generalized and Low-Layer SCIDAR turbulence profiles at San Pedro Mártir Observatory

R. Avila·O. Valdés-Hernández·L. J. Sánchez·I. Cruz-González·J. L. Avilés·J. J. Tapia-Rodríguez·C. A. Zúñiga
View original source ↗Read source document ↗Export metadata ↓

Abstract

We present optical turbulence profiles obtained with a Generalized SCIDAR (G-SCIDAR) and a Low Layer SCIDAR (LOLAS) at the Observatorio Astronómico Nacional in San Pedro Mártir (OAN-SPM), Baja California, Mexico, during three observing campaigns in 2013, 2014 and 2015. The G-SCIDAR delivers profiles with moderate altitude-resolution (a few hundred meters) along the entire turbulent section of the atmosphere, while the LOLAS gives high altitude-resolution (on the order of tens of meters) but only within the first few hundred meters. Simultaneous measurements were obtained on 2014 and allowed us to characterize in detail the combined effect of the local orography and wind direction on the turbulence distribution close to the ground. At the beginning of several nights, the LOLAS profiles show that turbulence peaks between 25 and 50 m above the ground, not at ground level as was expected. The G-SCIDAR profiles exhibit a peak within the first kilometer. In 55% and 36% of the nights stable layers are detected between 10 and 15 km and at 3 km, respectively. This distribution is consistent with the results obtained with a G-SCIDAR in 1997 and 2000 observing campaigns. Statistics computed with the 7891 profiles that have been measured at the OAN-SPM with a G-SCIDAR in 1997, 2000, 2014 and 2015 campaigns are presented. The seeing values calculated with each of those profiles have a median of 0.79, first and third quartiles of 0.51 and 1.08 arcsec, which are in close agreement with other long term seeing monitoring performed at the OAN-SPM.

Explore related subjects

astro-ph.IMphysics.ao-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

R. Avila, O. Valdés-Hernández, L. J. Sánchez, I. Cruz-González, J. L. Avilés, J. J. Tapia-Rodríguez, C. A. Zúñiga. 2019-09-17. Simultaneous Generalized and Low-Layer SCIDAR turbulence profiles at San Pedro Mártir Observatory. https://doi.org/10.1093/mnras%2Fstz2672

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Performance characterization of a new Structural and Thermal Architecture for a future spaceborne Closed-Cycle Dilution Refrigerator

A Structural and Thermal Model (STM) has been developed to support the new spaceborne Closed-Cycle Dilution Refrigerator (CCDR), which aims to provide continuous cooling at 100~mK for long-duration astrophysical missions. The STM is based on a hexapod architecture that ensures both thermal decoupling and mechanical robustness during launch. In this paper, we present the characterization of its thermal and mechanical performances. A dedicated experimental setup was used to investigate the thermal behavior of the STM across a broad temperature range. The study reveals limitations of the collar design, with incomplete power interception from thermal boundary resistances and vibration test failure traced to defective strut gluing. These results guide the next STM iteration with optimized collar and strut assembly for reliable CCDR operation in space.

astro-ph.IM↗
arXiv2026

The Simons Observatory: Development of a Pipeline to Detect Rapid Transients in Time-Ordered Data

We introduce a method for detecting astrophysical transients evolving on timescales of milliseconds to minutes using cosmic microwave background (CMB) survey telescopes. While previous transient searches in CMB data operate in map space, our pipeline directly processes the raw time-ordered data, enabling sensitivity to fast, dynamic signals. We integrate our detection approach into the Simons Observatory time-domain pipeline and assess the performance by injecting symmetric, stellar flare-like light curves into simulated observations. For events flaring with a timescale of 0.5 s, the pipeline detects $\gtrsim90$ % of events at flux densities of 800, 1150, 1650, and 4250\,mJy when measured in the 93, 145, 225, and 280 GHz bands respectively. At a fixed peak flux density, the pipeline more readily detects longer flares. The limiting flux density for 90 % completeness is four times lower for a $\ge5$ s flare than for a 0.5 s flare, while the flux density limits for $\gtrsim50$ % detection efficiency are comparable to the rms noise of the time-ordered data. We are able to determine the position of detected events in each observing band, with a positional uncertainty at the detection threshold comparable to the telescope resolution at that band. These results demonstrate the readiness of this pipeline for incorporation into upcoming Simons Observatory data analyses.

astro-ph.IM↗
arXiv2026

Thermal conductivity of various CFRPs from 100 mK to 20 K

Carbon-fiber-reinforced polymers (CFRPs) are some of the most useful materials for building spacecraft and aerospace tools. They are especially valuable for systems that work at extremely cold (cryogenic) temperatures because they are strong, lightweight, and don't transfer heat easily. In this study, researchers measured how well heat moves through several different types of carbon fiber samples, specifically T300, T700, HS40, M55J, and IMA, at different fiber layouts and densities. These measurements were taken at ultra-cold temperatures ranging from 100 mK to 20 K. The team used a newly developed analysis method to calculate the thermal conductivity for each sample. Finally, they shared how each material behaved at different temperatures and compared their findings to previous research.

astro-ph.IM↗