COOK: Chirp-OOK Communication with Self-reliant Bitrate Adaptation in Backscatter Networks

Abstract

For large-scale Internet of Things (IoT), backscatter communication is a promising technology to reduce power consumption and simplify deployment. However, backscatter communication lacks stability, along with limited communication range within a few meters. Due to the limited computation ability of backscatter tags, it is burdensome to effectively adapt the bitrate for the time-varying channel. Thus, backscatter tags are failed to fully utilize the optimal transmission rate. In this paper, we design a system named COOK with self-reliant bitrate adaptation in backscatter communication. Channel symmetry allows backscatter tags to adjust bitrate depending on the received signal strength of the excitation source (ES) without feedback. In addition, the chirp spreading signal is exploited as the ES signal to enable backscatter tags to work under noise floor. Our modulation approach is denoted as Chirp-OOK since the tags reflect the chirp signal by employing the on-off keying modulation. It allows that receiver can decode under the noise floor and the bitrate varies flexibly as the communication range changes. We have implemented the prototype system based on the universal software radio peripheral (USRP) platform. Extensive experiment results demonstrate the effectiveness of the proposed system. Our system provides valid communication distance up to $27m$, which is 7 times as compared with normal backscatter system. The system significantly increases the backscatter communication stability, by supporting bitrate adaptation ranges from 0.33kbps to 1.2Mbps, and guaranteeing the bit error rate (BER) is below 1%.