Search arXivSearch

arXiv · 2001.06132

Depth profile study of $^{210}$Pb in the surface of an NaI(Tl) crystal

Abstract

The surface $^{210}$Pb is one of the main background sources for dark-matter-search experiments using NaI(Tl) crystals, and its spectral features associated with the beta-decay events for energies less than 60 keV depends on the depth distribution of $^{210}$Pb in the surface of an NaI(Tl) crystal. Therefore, we must understand the profile of surface $^{210}$Pb to precisely model the background measurement in the low-energy region for the low-background experiment using NaI(Tl) crystals. We estimate the depth profile of the surface $^{210}$Pb contamination by modeling the measured spectrum of the alpha emission from the decay of $^{210}$Po at the decay sequence of the surface $^{210}$Pb contamination that is obtained using an $^{222}$Rn-contaminated crystal. In order to describe the energy spectra of the surface contamination we perform a log-likelihood fit of the measured data to a sum of Geant4 Mote Carlo simulations, weighted by an exponential curve as a function of the surface depth. The low- and high-energy events from the beta decay of surface $^{210}$Pb are also modeled to improve the depth profile for shallow depths. We simulate the energy spectra from beta decays of $^{210}$Pb that are exponentially distributed in the surface by following two exponential functions where the mean-depth coefficients are free parameters in the data fitting; we observed that the energy spectra are in good agreement with the measured data.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

G. H. Yu, C. Ha, E. J. Jeon, K. W. Kim, N. Y. Kim, Y. D. Kim, H. S. Lee, H. K. Park, C. Rott. 2020-09-04. Depth profile study of $^{210}$Pb in the surface of an NaI(Tl) crystal. https://doi.org/10.1016/j.astropartphys.2020.102518

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det