Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2001.07561

Flame dynamics during intermittency and secondary bifurcation to longitudinal thermoacoustic instability in a swirl-stabilized annular combustor

Amitesh Roy·Samarjeet Singh·Asalatha Nair·Swetaprovo Chaudhuri·R I Sujith
View original source ↗Read source document ↗Export metadata ↓

Abstract

In this experimental study on a laboratory-scale turbulent annular combustor with sixteen swirl-stabilized burners, we study the flame-flame and flame-acoustic interactions during different dynamical states associated with the longitudinal mode of the combustor. We simultaneously measure the acoustic pressure and CH* chemiluminescence emission of the flame using a high-speed camera. Upon increasing the equivalence ratio, the combustor undergoes the following sequence of transition: combustion noise (CN) to low amplitude longitudinal thermoacoustic instability (TAI) through the state of intermittency (INT), and from low amplitude to high amplitude longitudinal TAI through a secondary bifurcation. We report the first evidence of secondary bifurcation from low amplitude TAI to high amplitude TAI for a turbulent thermoacoustic system which allows us to test the flame response at two different amplitude of perturbation in a natural setting. We find a significant difference in the dynamics of the flame interactions during the periodic part of intermittency and low and high amplitude TAI. Specifically, during the periodic part of intermittency, the phase difference between the local heat release rate (HRR) measured from various burners show significant phase slips in time. During low amplitude TAI, there are fewer phase slips among the HRR response of the burners, which result in a state of weak synchronization among the flames. During high amplitude TAI, we find that the flames are in perfect synchrony amongst themselves and with the pressure fluctuations. We then quantify the degree of temporal and spatial synchronization between different flames, and flames and pressure fluctuations using the Kuramoto order parameter and the phase-locking value. We show that synchronization theory can be conveniently used to characterize and quantify flame-acoustic interactions in an annular combustor.

Explore related subjects

physics.flu-dyn

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Amitesh Roy, Samarjeet Singh, Asalatha Nair, Swetaprovo Chaudhuri, R I Sujith. 2020-05-18. Flame dynamics during intermittency and secondary bifurcation to longitudinal thermoacoustic instability in a swirl-stabilized annular combustor. https://doi.org/10.1016/j.proci.2020.08.053

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Cross-helicity and chaotic dynamics of full-disc solar magnetic field

Using the results of laboratory experiments and direct numerical simulations, as well as observations of the full-disc solar magnetic field and sunspot number dynamics, it is demonstrated that cross-helicity can dominate the decaying part of the frequency power spectra of the magnetic field generated by a magnetohydrodynamic (MHD) dynamo in chaotic/turbulent swirling flows for sufficiently strong MHD turbulence (including the solar dynamo). The theoretical consideration is based on a Kolmogorov-like phenomenology within the framework of the distributed chaos concept. It is also shown that the solar full-disc magnetic field for the last two solar cycles with weak magnetic activity exhibits deterministic chaotic behavior concentrated around the equator.

physics.flu-dyn↗
arXiv2026

Manifestation of spurious currents and interface regularization in wind turbulence over fast-propagating waves

Accurate simulation of wind turbulence over fast-propagating waves requires interface-capturing methods that suppress numerical artifacts while accurately resolving momentum transfer across the interface. In high wave-age regimes, numerical errors at the air-water interface can reach magnitudes comparable to the physical flow, directly affecting predicted turbulence statistics. This study examines widely used interface-capturing techniques to evaluate how curvature estimation and flux discretization influence wind-wave simulations through the resulting spurious currents and interface regularization. A systematic assessment is performed using static and translating droplet benchmarks, together with solitary and monochromatic wave cases, to identify and quantify the dominant numerical error mechanisms. In addition, comparison with experimental measurements reveals how these primary error sources manifest in coupled wind-wave simulations. These findings clarify the numerical origin of the observed discrepancies and underscore the importance of accurate curvature and flux treatment in high wave-age regimes, without which numerical artifacts risk being misattributed to genuine wind-wave physics.

physics.flu-dyn↗
arXiv2026

A reconfigurable multi-axis cyber-physical framework for multi-regime fluid--structure interaction experiments

Fluid--structure interaction (FSI) experiments are typically built around mechanical dynamics and constraints imposed by the physical apparatus, so changing mass, stiffness, damping, or allowable motion often requires hardware reconfiguration. Here we present a reconfigurable cyber-physical framework in which these properties are instead assigned through software-defined dynamics. The system provides three translational and one rotational degree of freedom, each independently configurable as prescribed, load-responsive, or locked, with operating roles that can also be reassigned during a running experiment. Measured forces and torques are incorporated into real-time virtual dynamic models, while a common supervisory architecture coordinates multi-axis motion, mode switching, synchronized data acquisition, and diagnostic positioning. The prescribed-motion pathway is validated using a pitching hydrofoil by comparison with published thrust and power scaling trends, while the load-responsive pathway is evaluated using an active-heave/passive-pitch benchmark that reproduces the expected frequency-dependent resonant response over the tested conditions. The same platform is then reconfigured for intra-cycle active--passive pitching, coordinated vertical-axis turbine-surrogate motion, force-driven passive surge, and automated multilayer stereoscopic particle image velocimetry. These results demonstrate that distinct FSI boundary conditions and measurement requirements can be implemented within a common motion, sensing, and control architecture. By treating mechanical roles and constraints as software-defined experimental variables, the framework provides a reusable basis for reconfigurable FSI experiments without redesigning the underlying platform for each application.

physics.flu-dyn↗