Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2002.06711

A method of enhancing the detection sensitivity of transient sources in time series with Gaussian stationary noise

Richard Lieu·Kristen Lackeos
View original source ↗Read source document ↗Export metadata ↓

Abstract

The Gaussian phase noise of intensity time series is demonstrated to be drastically reduced when the raw voltage data are digitally filtered through an arbitrarily large number $n$ of orthornormal bandpass profiles (eigen-filters) sharing the same intensity bandwidth, and the resulting intensity series are co-added. Specifically, the relative noise variance of the summed series at the resolution of one coherence time or less, goes down with increasing $n$ as $1/n$, although (consistent with the radiometer equation) the advantage gradually disappears when the series is bin averaged to lower resolution. Thus the algorithm is designed to enhance the sensitivity of detecting transients that are smoothed out by time averaging and too faint to be visible in the noisy unaveraged time series, as demonstrated by the simulation of a weak embedded time varying signal of either a periodic nature or a fast and unrepeated pulse. The algorithm is then applied to a 10 minute observation of the pulsar PSR 1937+21 by the VLA, where the theoretical predictions were verified by the data. Moreover, it is shown that microstructures within the time profile are better defined as the number $n$ of filters used increases, and a periodic signal of period $1.86 \times 10^{-5}$~s ($53.9$~kHz) is discovered in the pulse profile. Lastly, we apply the algorithm to the first binary black hole merger detected by LIGO, GW150914. We find the SNR of the mean peak intensity increases as $\sqrt{n}$ and cross correlation of the event between the LIGO-Hanford-Livingston detector pair increases with filter order $n$.

Explore related subjects

astro-ph.IM

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Richard Lieu, Kristen Lackeos. 2020-05-27. A method of enhancing the detection sensitivity of transient sources in time series with Gaussian stationary noise. https://doi.org/10.1088/1361-6382%2Fab95e4

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Observations of Binary Stars with the 1.3-m Devasthal Fast Optical Telescope Using Speckle Interferometry: An Attempt

We present a feasibility study of implementing optical interferometry and speckle techniques with the 1.3-m Devasthal Fast Optical Telescope (DFOT) at Aryabhatta Research Institute of Observational Sciences (ARIES), which is currently dedicated to photometric observations. Using the sCMOS camera at the DFOT backend, we perform interferometric speckle observations of six binary stars. Standard Speckle Interferometry algorithms are applied to analyze the recorded speckle images. While this study does not aim to achieve the diffraction limit of DFOT or address a full science-driven resolution case, it serves as a crucial testbed for instrumentation, data acquisition, and analysis of Speckles with DFOT. Although the individual speckle patterns exhibit significant positional variations from frame to frame, the Speckle Interferometry analysis successfully recovers the characteristic three-peak structure of the wide binaries, allowing their relative separations and position angles to be determined, demonstrating the viability of the approach. The measured angular relative separations of $γ$ Leo, $γ$ Vir, and $ζ$ Her are $4.744'' \pm 0.012''$, $3.387'' \pm 0.027''$, and $1.582'' \pm 0.026''$, respectively, with corresponding projected position angles of $126.94^{\circ} \pm 0.14^\circ$, $171.57^{\circ} \pm 0.33^\circ$, and $81.06^{\circ} \pm 0.91^\circ$. These measurements are consistent with previously reported values in the literature, which provides strong motivation for more systematic observations and future implementation of optical interferometry techniques at meter-class telescopes.

astro-ph.IM↗
arXiv2026

Time-Domain Synthesis of Gravitational-Wave Detector Glitches using Class-Conditional Derivative Generative Adversarial Networks

Gravitational-wave detectors such as LIGO, Virgo, and KAGRA are highly sensitive instruments susceptible to many noise sources. Short-duration transient noise events, known as glitches, pose a particular challenge for data analysis pipelines, as they can mimic or obscure astrophysical signals. We present GlitchGAN, a class-conditional generative model built on the Conditional Derivative GAN (cDVGAN) architecture, capable of synthesizing seven glitch types from LIGO's third observing run (O3) directly in the time domain. GlitchGAN generalizes effectively, learning to reproduce a diverse glitch space consistent with high-quality DeepExtractor reconstructions, and can generate hybrid glitch morphologies by interpolating across its class-conditioning vector. It generates 1000 glitches in under 22 seconds on a CPU, suitable for detector simulations, mock data challenges, and pipeline validation. Synthetic glitches are validated using the Gravity Spy classifier and UMAP embeddings, both showing strong agreement with real data. To probe residual distributional differences, we train a separate holdout GlitchGAN model and use a downstream CNN to distinguish held-out real glitches from synthetic ones: detectability is high in a clean representation but drops substantially once both populations are injected into realistic detector noise, the condition under which they would typically be used. Despite this, GlitchGAN-generated glitches remain practically useful: augmenting real training sets with synthetic samples matches simple duplication of real data when data is abundant, and increasingly outperforms it as real data becomes scarce. Finally, we highlight a limitation of magnitude-only spectrograms: magnitude Q-transform classifiers can confidently misclassify physically unrealistic glitches from less robust models, underscoring the need for validation methods that preserve phase information.

astro-ph.IM↗
arXiv2026

SGN: A python framework for stream-processing pipelines

We present the Stream Graph Navigator (SGN), a lightweight Python framework for building streaming data applications. In SGN, stream-processing pipelines are built by connecting computational components into directed acyclic graphs that run within an event loop. The time-series extension of the SGN library, SGN-TS, introduces signal processing methods to handle time series data. Together, SGN and SGN-TS provide the foundation for SGNL, a matched-filtering gravitational-wave search pipeline, and are being adopted by multiple projects across the low-latency gravitational-wave data analysis infrastructure as an extensible and maintainable framework for future gravitational-wave observations.

astro-ph.IM↗