Multiple quasi phase matched second harmonic generation in phase reversal optical superlattice structure

Toijam Sunder Meetei; Meerasha Mubarak Ali; Shanmugam Boomadevi; Krishnamoorthy Pandiyan

Home/Archive/arXiv

arXiv · 2003.03547

Multiple quasi phase matched second harmonic generation in phase reversal optical superlattice structure

Toijam Sunder Meetei·Meerasha Mubarak Ali·Shanmugam Boomadevi·Krishnamoorthy Pandiyan

View original source ↗Read source document ↗Export metadata ↓

Abstract

Domain-engineered quasi-phase-matching (QPM) devices are known for its versatility and ability to tune the nonlinear optical frequency conversion process. In this paper, a simple approach is presented to generate multiple quasi-phase-matched second-harmonic generation (SHG) in the phase reversal optical superlattice (PROS) structure. Theoretical studies are carried out by simulation based on the domain reversed lithium niobate QPM devices. The nature of the generated multiple SHG spectra is analyzed when the phase reversal (PR) domains are distributed at equal and unequal intervals along the length of the device. The distribution of phase reversal domains at equal intervals is limited to the generation of dual SHG peaks irrespective of its number. On the contrary, we could generate equal-intensity multiple SHG peaks with PR domains distribution at unequal interval. Using this scheme, five peaks QPM SHG are generated by distributing four PR domains in specific locations of the PROS QPM device. The dependency of the PR domain and its location in the PROS QPM device are analyzed to design desirable multi-wavelength converters

Explore related subjects

physics.optics

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Toijam Sunder Meetei, Meerasha Mubarak Ali, Shanmugam Boomadevi, Krishnamoorthy Pandiyan. 2020-03-07. Multiple quasi phase matched second harmonic generation in phase reversal optical superlattice structure. https://arxiv.org/abs/2003.03547

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Rubidium referenced Kerr comb with cavity phase matching

Phase matching is a fundamental problem in nonlinear optics that is normally constrained by material dispersion. The limited operation wavelengths within phase matching window limits the application, including the precise metrology using Kerr combs. Demanding applications like compact optical clock and astronomical spectroscopy requires atomic reference around 800 nm, where the natural phase matching is challenging. Here we revisit the concept of cavity phase matching (CPM), and fully reveal its advantage to engineer artificial phase matching beyond material dispersion. With the access of CPM condition in a monolithic high-Q fiber Fabry-Pérot resonator featuring a macroscopic cavity length, we achieve low noise Kerr comb generation around 800 nm, within the power budget of a single-mode laser diode. Inside a pump-integrated package of 19 cm3, low phase noise of -125 dBc/Hz at 100 kHz offset frequency is achieved for a 10.1 GHz repetition rate. Most importantly, the generated Kerr comb has been directly referenced to rubidium atomic transition for long-term stable operation. This result not only opens a new way for Kerr comb generation at arbitrary wavelengths, but also can be generalized to any other nonlinear optical frequency conversion application.

physics.optics↗

arXiv2026

Mid-infrared reconfiguration of population flow in lanthanide nanocrystals

Converting mid-infrared (MIR) radiation to visible or near-infrared wavelengths is essential for imaging and sensing, yet achieving sensitive, low-power, and scalable detection remains challenging. Lanthanide nanocrystals provide an alternative through ratiometric luminescence but are typically constrained by Boltzmann statistics, which tie population distributions to lattice temperature and limit signal contrast. Here we show that MIR irradiation rebalances dissipative relaxation pathways, driving lanthanide emitters into a non-Boltzmann steady state that enables non-thermal control of population distributions. This allows emission behaviors inaccessible under thermal equilibrium. We exploit this regime to achieve linear MIR detection with respect to MIR power across 6.8 to 8.6 micrometers. The ratiometric response is intrinsically independent of the pump power, enabling operation at an ultralow excitation power of 10 uW, several orders of magnitude lower than conventional approaches. Using standard silicon photodetectors, we then demonstrate room-temperature MIR imaging with detection limits approaching 4 nW um-2. Our results establish lanthanide nanoparticles as an efficient platform for MIR conversion and sensing in nanophotonic systems.

physics.optics↗

arXiv2026

Intracavity THz generation using a thin lithium niobate plate in a compact Kerr-lens mode-locked Yb:CALGO bulk oscillator

We demonstrate intracavity terahertz (THz) generation via optical rectification in a 50-m-thick lithium niobate crystal placed inside a compact diode-pumped Kerr-lens mode-locked (KLM) Yb:CALGO bulk oscillator. The oscillator operates at a repetition rate of 85 MHz and delivers 83-fs pulses with up to 71 W of average intracavity power, obtained with only 21.4 W of low-cost multimode diode pump power. We generate single-cycle THz pulses with a spectrum extending up to 3 THz, detected by electro-optic sampling with 60 dB dynamic range within 156 s of measurement time (313 averaged traces) and up to 120 W of THz average power. This work combines the high damage threshold, power-handling capability, and cost-effectiveness of thin LN plates with simplicity, compactness, and low-cost multimode diode-pumped solid-state bulk lasers, offering an attractive alternative for high-repetition-rate THz time-domain spectroscopy systems.

physics.optics↗