Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2003.07251

First observations and magnitude measurement of Starlink's Darksat

J. Tregloan-Reed·A. Otarola·E. Ortiz·V. Molina·J. Anais·R. González·J. P. Colque·E. Unda-Sanzana
View original source ↗Read source document ↗Export metadata ↓

Abstract

Measure the Sloan g' magnitudes of the Starlink's STARLINK-1130 (Darksat) and 1113 LEO communication satellites and determine the effectiveness of the Darksat darkening treatment at 475.4\,nm. Two observations of the Starlink's Darksat LEO communication satellite were conducted on 2020/02/08 and 2020/03/06 using a Sloan r' and g' filter respectively. While a second satellite, STARLINK-1113 was observed on 2020/03/06 using a Sloan g' filter. The initial observation on 2020/02/08 was a test observation when Darksat was still manoeuvring to its nominal orbit and orientation. Based on the successful test observation, the first main observation was conducted on 2020/03/06 along with an observation of the second Starlink satellite. The calibration, image processing and analysis of the Darksat Sloan g' image gives an estimated Sloan g' magnitude of $7.46\pm0.04$ at a range of 976.50\,km. For STARLINK-1113 an estimated Sloan g' magnitude of $6.59\pm0.05$ at a range of 941.62\,km was found. When scaled to a range of 550\,km and corrected for the solar and observer phase angles, a reduction by a factor of two is seen in the reflected solar flux between Darksat and STARLINK-1113. The data and results presented in this work, show that the special darkening coating used by Starlink for Darksat has darkened the Sloan g' magnitude by $0.77\pm0.05$\,mag, when the range is equal to a nominal orbital height (550\,km). This result will serve members of the astronomical community modelling the satellite mega-constellations, to ascertain their true impact on both the amateur and professional astronomical communities. Concurrent and further observations are planned to cover the full optical and NIR spectrum, from an ensemble of instruments, telescopes and observatories.

Explore related subjects

astro-ph.IM

Keep this discovery

BibTeXRIS

J. Tregloan-Reed, A. Otarola, E. Ortiz, V. Molina, J. Anais, R. González, J. P. Colque, E. Unda-Sanzana. 2020-03-16. First observations and magnitude measurement of Starlink's Darksat. https://doi.org/10.1051/0004-6361/202037958

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗
arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗
arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗