Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2005.02124

Realization of MIMO Channel Model for Spatial Diversity with Capacity and SNR Multiplexing Gains

Subrato Bharati·Prajoy Podder·Niketa Gandhi·Ajith Abraham
View original source ↗Read source document ↗Export metadata ↓

Abstract

Multiple input multiple output (MIMO) system transmission is a popular diversity technique to improve the reliability of a communication system where transmitter, communication channel and receiver are the important elements. Data transmission reliability can be ensured when the bit error rate is very low. Normally, multiple antenna elements are used at both the transmitting and receiving section in MIMO Systems. MIMO system utilizes antenna diversity or spatial diversity coding system in wireless channels because wireless channels severely suffer from multipath fading in which the transmitted signal is reflected along various multiple paths before reaching to the destination or receiving section.Parallel transmission of MIMO system has also been implemented where both the real part and imaginary part of the original, detected and the corresponding received data sequence has been described graphically. The MIMO channel average capacity is achieved more than 80% for dissimilar levels of impairments in transceiver when the value of kappa (Level of impairments in transmitter hardware) reduces from 0.02 to 0.005. The finite-SNR multiplexing gain (Proportion of MIMO system capacity to SISO system capacity) has been observed for deterministic and uncorrelated Rayleigh fading channels correspondingly. The core difference is in the high SNR level. It may occur for two reasons: (a) there is a quicker convergence to the limits under transceiver impairments (b) deterministic channels that are built on digital architectural plans or topographical maps of the propagation environment acquire an asymptotic gain superior than multiplexing gain when the number of transmitting antenna is greater than the number of receiving antenna.

Explore related subjects

eess.SPcs.ITmath.IT

Keep this discovery

BibTeXRIS

Subrato Bharati, Prajoy Podder, Niketa Gandhi, Ajith Abraham. 2020-04-24. Realization of MIMO Channel Model for Spatial Diversity with Capacity and SNR Multiplexing Gains. https://arxiv.org/abs/2005.02124

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Load Balancing in Multi-Shell LEO Satellite Networks with Successive Interference Cancellation

Multi-shell low Earth orbit (LEO) networks can increase service opportunities, but altitude-dependent propagation can concentrate traffic on lower shells and create strong inter-shell interference under full frequency reuse. This paper develops a mathematical framework for load balancing in multi-shell LEO satellite networks. Satellites on each shell form an independent spherical Poisson point process (SPPP), and the typical user associates with one of the per-shell serving satellites through a shell-dependent biased received-power rule, with receiver-side successive interference cancellation (SIC) under full frequency reuse. Shell-wise association probabilities, conditioned serving-distance distributions, and the rate coverage probability under shell-dependent traffic loads are derived and validated by simulation. The results show that shell-dependent biasing alleviates lower-shell traffic concentration and improves rate coverage, while receiver-side SIC mitigates the dominant lower-shell interference experienced by users associated with upper shells. Load balancing provides its largest rate-coverage gain in traffic hotspots, while SIC becomes more valuable as receive-side isolation weakens. With a fixed satellite budget, distributing satellites across multiple shells can further improve hotspot rate coverage by adding shell-wise serving opportunities.

eess.SP↗
arXiv2026

Tensor Decomposition Based Mixed-Field Sensing for XL-MIMO AFDM Systems

Integrated sensing and communications enabled by extremely large-scale MIMO (XL-MIMO) and affine frequency division multiplexing (AFDM) is a highly promising paradigm for vehicular networks. However, the near-field spherical wavefront distortions induce severe non-linear parameter coupling, while the highly dynamic scattering environments exacerbate mismatch errors. To address these critical challenges, this paper proposes a novel tensor-based sensing scheme for XL-MIMO AFDM systems. First, the received signals are reformulated into a tensor, followed by an efficient decomposition approach that exploits the inherent Vandermonde structure of the factor matrices. This allows parameters to be directly estimated from the decomposed matrices, effectively avoiding inter-parameter coupling. Subsequently, a symmetric decoupling and real-domain manifold optimization algorithm is proposed for angle of arrival estimation, circumventing the high-dimensional searches typically induced by near-field effects. Furthermore, a baseband reconstruction and analytical gradient-based algorithm is developed to perform delay-Doppler estimation in the continuous parameter domain, fundamentally eradicating the grid-mismatch errors inherent in high-mobility scenarios. With these decoupled factors, the remaining unknown angle of departure can be readily extracted. Extensive simulation results demonstrate that the proposed scheme achieves orders-of-magnitude improvements in delay-Doppler accuracy and eliminates the error floors in angular estimation that severely bottleneck state-of-the-art baselines.

eess.SP↗
arXiv2026

Radio Map Construction with Post-Hoc Location Calibration under Quasi-Static Positioning Errors: Joint Estimation, Performance Bounds, and GNSS-Based Evaluation

Radio maps enable environment-aware wireless and Internet-of-Things applications and can be constructed from location-tagged received signal strength (RSS) measurements collected by mobile devices. In urban environments, temporally correlated GNSS errors can shift an entire sensing trajectory, causing systematic spatial misregistration that is not mitigated by collecting more measurements. This paper presents a radio-map construction framework that uses the radio measurements themselves to calibrate erroneous location tags after data collection. The dominant positioning error is modeled as a sensor-specific quasi-static offset, which is jointly estimated with radio-propagation parameters in a Gaussian process regression (GPR) framework by exploiting complementary spatial information from distance-dependent path loss and spatially correlated shadowing. We establish lower and upper bounds on the conditional Bayes risk and show that, under a translation-invariant trajectory model, trajectory information alone cannot identify the quasi-static offset, thereby motivating the use of RSS-derived spatial information for calibration. Numerical evaluations across propagation conditions show that the proposed method reduces the mean squared error (MSE) gap from ideal GPR to approximately $3.26\mathrm{dB}^2$, compared with about $10\mathrm{dB}^2$ for position-error-agnostic and noisy-input GPR baselines. Evaluation using positioning-error models derived from smartphone GNSS measurements shows that the proposed method outperforms a KF--RTS trajectory-smoothing baseline despite unmodeled time-varying positioning errors, remaining within approximately $5\mathrm{dB}^2$ of ideal GPR at the median MSE. These results demonstrate that RSS measurements can serve not only as observations for radio-map reconstruction but also as spatial cues for post-hoc calibration of imperfectly geotagged sensing data.

eess.SP↗