Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2005.05567

AMoRE: A search for neutrinoless double-beta decay of 100Mo using low-temperature molybdenum-containing crystal detectors

Moo Hyun Lee
View original source ↗Read source document ↗Export metadata ↓

Abstract

The AMoRE is an experiment to search for neutrinoless double-beta decay of 100Mo in molybdate crystal scintillators using a cryogenic detection technique. The crystals are equipped with metallic magnetic calorimeter sensors that detect both phonon and photon signals at temperatures of a few tens of mK. Simultaneous measurements of thermal and scintillation signals produced by particle interactions in the crystals by MMC sensors provide high energy resolution and efficient particle discrimination. AMoRE-Pilot, an R&D phase with six 48deplCa100MoO4 crystals and a total mass of ~1.9 kg in the final configuration, operated at the 700 m deep Yangyang underground laboratory (Y2L). After completion of the AMoRE-Pilot run at the end of 2018, AMoRE-I with a ~6 kg crystal array comprised of thirteen 48deplCa100MoO4 and five Li2100MoO4 crystals is currently being assembled and installed at Y2L. We have secured 110 kg of 100Mo-isotope-enriched MoO3 powder for the production of crystals for the AMoRE-II phase, which will have ~200 kg of molybdate crystals and operate at Yemilab, a new underground laboratory located ~1,100 m deep in the Handeok iron mine that is currently being excavated and with a scheduled completion date of December 2020. AMoRE-II is expected to improve the upper limit on the effective Majorana neutrino mass to cover the entire inverted hierarchy neutrino mass region: 20-50 meV, in the case when no such decays are observed. Results from AMoRE-Pilot and progress of the preparations for AMoRE-I and AMoRE-II are presented.

Explore related subjects

physics.ins-detastro-ph.IMhep-exnucl-ex

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Moo Hyun Lee. 2020-05-12. AMoRE: A search for neutrinoless double-beta decay of 100Mo using low-temperature molybdenum-containing crystal detectors. https://doi.org/10.1088/1748-0221%2F15%2F08%2Fc08010

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det↗
arXiv2026

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det↗
arXiv2026

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det↗