Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2006.12151

Mean-flow Data Assimilation based on minimal correction of turbulence models: application to turbulent high-Reynolds number backward-facing step

Lucas Franceschini·Denis Sipp·Olivier Marquet
View original source ↗Read source document ↗Export metadata ↓

Abstract

In this article, we provide a methodology to reconstruct high-Reynolds number turbulent mean-flows from few time-averaged measurements. A turbulent flow over a backward-facing step at Re = 28275 is considered to illustrate the potential of the approach. The data-assimilation procedure, based on a variational approach, consists in correcting a given baseline model by tuning space-dependent source terms such that the corresponding solution matches available measurements (obtained here from direct-numerical simulations). The baseline model chosen here consists in Reynolds-Averaged-Navier-Stokes (RANS) equations closed with the turbulence Spalart-Allmaras model. We investigate two possible tuning functions: a source term in the momentum equations, which is able to compensate for the deficiencies in the modeling of the Reynolds stresses by the Boussinesq approximation and a source term in the turbulence equation, which modifies the balance between the eddy-viscosity production and dissipation. The quality of the mean-flow reconstruction strongly depends on the baseline model and on the quantity of measurements. In the case of many measurements, very accurate reconstructions of the mean-flow are obtained with the model corrected by the source term in the momentum equations, while the reconstruction is more approximate when tuning the source term in the turbulence model. In the case of few measurements, this "rigidity" of the corrected turbulence model is favourably used and allows the best mean-flow reconstruction. The flexibility / rigidity of a model is further discussed in the light of a singular-value decomposition of the linear input / output operator between source term and measurements.

Explore related subjects

physics.flu-dynphysics.comp-ph

Keep this discovery

BibTeXRIS

Lucas Franceschini, Denis Sipp, Olivier Marquet. 2020-06-22. Mean-flow Data Assimilation based on minimal correction of turbulence models: application to turbulent high-Reynolds number backward-facing step. https://doi.org/10.1103/physrevfluids.5.094603

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗